3110 webcam: Webcam 3110 works is not from windows update 10

My 3110 webcam does not work since the upgrade of Windows 10. It stays on for a second when connected and can be seen in the Device Manager, but later buttons, lights, and functions do not work what so ever.

Hi there @AUTOEMOTIONAL,

I hope you find your experience of positive Support Forum!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that you are not able to use your webcam after upgrade to Windows 10 I am happy to help you with this.

You have another computer or device to test with the webcam to ensure it works normally again?

Looking at the page drivers and software Webcam HD - 3100 HP, there are not any drivers for Windows 10 or 8.x Windows at all. You could try to load the driver of Windows 7 by using compatibility mode in Windows 10. How: install and update drivers in Windows 10 -answers.microsoft.com

Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

Tags: HP Tablets

Similar Questions

  • Skype works do not after Windows update Setup

    Original title: you broke all my messengers with DEP.

    That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
    I thought about this once, of course, I'll do the update and now my Skype will not work.
    I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
    How to operate? It is extremely important that I make it work again soon.

    -Edit-
    I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
    But I got "access denied."

    Original title: you broke all my messengers with DEP.

    That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
    I thought about this once, of course, I'll do the update and now my Skype will not work.
    I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
    How to operate? It is extremely important that I make it work again soon.

    -Edit-
    I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
    But I got "access denied."

    Don't blame Windows updates.
    For all the world claiming fault from Windows updates, there are at least 2 who have had no problems with it.

    It's your computer. Somewhere, the parameters are wrong.

    As to...
    I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
    But I got "access denied."

    When you run the cmd, command prompt, you're supposed to do right click on cmd > click on Run As Administrator > then enter the command in cmd.
    They call this elevated command prompt.

    Did you do that?

  • Internet and the printer works do not after windows update

    Windows xp, mcafee internet security

    Recently, I ran a windows update and leave my computer turned off.  When you turn it on, the were (are) of the internet and the printer does not.  I went into Device Manager via Control Panel to see if I could turn them on and there is nothing pulling up in the Device Manager.  All documents and are accessible, but I can't even start a new internet connection and cannot print.   I am currently using another computer (more modern) in another room.  I even tried the SafeMode (f8 in the middle) from the model and go to Device Manager and nothing was there.  I just tried to go through the f8 option and beginning to a previous state that worked and I have the same result...  Everything is saved on that on a 350g portable hard drive.  It would just be easier to wipe the hard drive and start over? If so how would I do this reformatting?  Thanks for any advice.

    Michael

    Hello MikeKloss,

    Before you destroy by formatting the hard drive on your computer, I suggest that you do a restore of the system on the computer by choosing a restore point when it was working fine. You can check the link that will give you information about how to restore the system on the computer below:

    http://support.Microsoft.com/kb/306084

  • WIFI connection works do not after Windows Update installation

    Original title: update windows

    My daughter who has just an update running on Windows 8. He wrecked his WiFi connection/settings. His internet now works on the wired only. Is it safe run a system restore?

    Paul,

    Tip: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or updated IE & restart.  If that does not resolve the problem, then try System Restore.

    Restore to before the update was installed check Windows updates and hide the update so it would not automatically reinstall and the program works.

    The time and date of this moment in Washington, United States of America is 16:14

    Tuesday, October 29, 2013
    The time Pacific daylight time (PDT)-0700 UTC

    UTC/GMT is 23:14 Tuesday, October 29, 2013

    Current weather conditions in Seattle

    Just55 ° F / 13 ° C
  • I don' t have drivers from windows update to my Webcam Compaq CPQ74CAM

    I don' t have drivers from windows update to my Webcam Compaq CPQ74CAM

    True salvation,

    Please contact the technical support of Compaq http://www8.hp.com/us/en/support-drivers.html or get more help, more support options there.

    Good luck!

    Kosh

  • Windows could not get a list of devices from Windows Update. Try again later

    Original title: Windows 7 list printers cannot be updated
    I installed a windows 32 bit 7 OS several weeks ago on my workstation Futitsu-Siemens and followed the instructions on the HP Wizard to try to install the HP Deskjet 990c printer driver for my HP 6122 printer. According to the HP Wizard, the only way to do is to update the list of printers by clicking on the "Windows Update" button in the dialog "add a printer".  I clicked on this button several dozen times in recent weeks, and every time I get the message "Windows could not get a list of devices from Windows Update. Try again later.

    I installed a windows 32 bit 7 BONES of several months on my HP laptop and the printer list updated without a hitch to include many more HP printers that are on my computer Futitsu-Siemens including HP 990c.

    What should I do?

    Here's what I found my system which is an Z210 64 HP running windows7. I just updated my Bios to v1.35

    What I did to get the update to work once and what I have to do each time to add another printer by using the Update window.

    1. open (Ctrl-Alt-Del) Task Manager

    2. click on tab of abuse, then Services button (bottom-right)

    3. under the name to find "Windows Update".

    4. right click "Windows Update" and select stop. do not close

    5. open the Exploper window and browse to C:\Windows

    6 delete the folder "C:\Windows\SoftwareDistribution".

    7. go back to served, right click on "Windows Update", and then select start

    Now the "Windows Update" button should work. For me I have to do every time I have to install a printer that requires me to use windows update

    Looking for what casues the error

    at the bottom of a file named WindowUpdate.log located in C:\Windows after that I get the message "Windows was unabel to...» "I have this text below.

    2012-04-30 14:20:18:782 284 5cc Agent *.
    2012-04-30 14:20:18:782 284 5cc Agent * START * Agent: finding updates [CallerId = CDM] of
    2012-04-30 14:20:18:782 284 5cc Agent *.
    2012-04-30 14:20:18:782 284 5cc Agent * Online = Yes; Ignore download priority = No
    2012-04-30 14:20:18:782 284 5cc Agent * criteria = "Type ="Driver"and DeploymentAction = 'Installation' and DriverClass = 'Printer' and DriverMatch = 'Catalogue'"
    2012-04-30 14:20:18:782 284 5cc Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
    2012-04-30 14:20:18:782 284 5cc Agent * scope of search = {Machine}
    2012-04-30 14:20:19:952 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2012-04-30 14:20:19:952 284 5cc Misc Microsoft signed: Yes
    2012-04-30 14:20:20:030 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2012-04-30 14:20:20:030 284 5cc Misc Microsoft signed: Yes
    2012-04-30 14:20:20:030 284 5cc PT +++ PT: Synchronizing server updates +++
    2012-04-30 14:20:20:030 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
    2012-04-30 14:20:22:183 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2012-04-30 14:20:22:183 284 5cc Misc Microsoft signed: Yes
    2012-04-30 14:20:22:214 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2012-04-30 14:20:22:214 284 5cc Misc Microsoft signed: Yes
    2012-04-30 14:20:22:214 284 5cc PT +++ PT: synchronization of applicable printers +++
    2012-04-30 14:20:22:214 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
    2012-04-30 14:20:23:072 284 5cc PT WARNING: SyncPrinterCatalog failed, error is 0x8024400D, the soap client error = 7, soap = 300, HTTP = 200 status code error code
    2012-04-30 14:20:23:072 284 5cc PT WARNING: SOAP fault: 0x00012c
    2012-04-30 14:20:23:072 284 5cc PT WARNING: faultstring:Fault has occurred
    2012-04-30 14:20:23:072 284 5cc PT WARNING: ErrorCode:InvalidParameters (7)
    2012-04-30 14:20:23:072 284 5cc PT WARNING: Message: printerUpdateIDs
    "" 2012-04-30 14:20:23:072 284 5cc PT WARNING: method: "http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncPrinterCatalog"
    2012-04-30 14:20:23:072 284 5cc PT WARNING: ID:fd5a6897-e20b-4a8f-a118-c9c791da6851
    2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
    2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
    2012-04-30 14:20:23:150 284 72 c to THE cannot perform scan non-interactive if AU is interactive only
    2012-04-30 14:20:23:150 284 5cc Agent * found 0 updates and 17 categories of research; rules apply rated 193 on 660 deployed entities
    2012-04-30 14:20:23:150 284 5cc Agent *.
    2012-04-30 14:20:23:150 284 5cc Agent * END * Agent: finding updates [CallerId = CDM] of
    2012-04-30 14:20:23:150 284 5cc Agent *.
    2012-04-30 14:20:28:162 284 5cc report REPORT EVENT: {C7177063-6BAB-4A17-AC0B-74B0D47355FA} 2012-04-30 14:20:23:150 - 0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 success CDM Windows Update Client synchronization software detected 0 updates successfully.
    2012-04-30 14:20:28:162 284 5cc CWERReporter finish event management report. (00000000)

  • Function keys not working do not after Windows 7 installation

    Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

    What can I do with this? I want to re install windows. ?

    Hello

    This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

    http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

    Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

  • "Windows could not get a list of devices from windows update"

    I've been looking for a solution for several weeks now. Many people seem to have the same problem. But no one has yet been able to solve the problem.

    First of all, let me clarify the problem explicitly:

    In the Add Printer Wizard: "Windows could not get a list of devices from windows update"

    Specifically, the problem is that Windows Update *broken* in the Add Printer Wizard. (Windows Update, otherwise works fine. But not in the Add Printer Wizard.)

    Find a workaround to add the printer, which mostly does not work what I have read, would be only to solve the secondary problem of the addition of this printer. Except, it would not solve the main problem which is Windows Update *broken* in the Add Printer Wizard.

    Details:

    I have been setting up three new PC running Windows 7 Pro 64-bit. I had to add an old LaserJet 5if connected to a former print server. I created the IP Standard port, then clicked on the "Windows Update" button to update the list of printers. It worked on the first perfectly, as it has in the past with other computers to this place. Then I started to work on the other two at the same time. I'm lazy and started to perform several tasks such as installation of MS Office, Security Essentials (less than 10 units at this office, BTW), etc. while the Add Printer Wizard was updating the list of devices. One of these things, I can't remember which, required a reboot.

    And that is where I am certain that things broke. Restart has occurred while the two computers are in the middle of the list of loading from Windows Update System. I not interrupted the first PC. But the other two were interrupted and now they can't get a current list of Windows Update.

    I tried the FixIt tool at http://support.microsoft.com/kb/971058 . He says he detects a problem and claims to have fixed. Except, it isn't - little matter how many times I run.

    Ideally, the FixIt tool above must be updated or a new tool must be created by Microsoft to resolve this particular problem. Type of the error in any search engine, and you will see this question from several years back. It's happens often enough to justify the creation of Microsoft or update a FixIt tool.

    Any thoughts would be helpful.

    I have exactly and that no ONE reads what you say or what other people say everywhere. Only the upgrade Assistant printer does not... The update of the Printer Wizard do not work. Windows Update works fine.

    Ronday,
    You are right that if few people read what they respond to these forums. That's the kind of non-response, I found everywhere on the Internet about this issue. (The value of the community is sometimes over-rated, if you ask me). Apparently, using characters fat is not enough to focus on the fact that the issue is not with the printer compatibility since, as I said clearly A) this printer has installed fine several times in the past with the same OS and in the same office and B) that I clearly THE issue is that updated the list of devices , in the Printer Wizard, *Do NOT*!  
    However, I came across a suggestion on another site. I haven't had the chance to try it at the location of this particular customer - I'll do it later this month. Here is the link to the suggestion for you to try as well. Scroll to the end to ignore any non-response:
    'Michel' made the following suggestion:
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    Hi, most likely caused by one installation failed (not the Wizard), you need to do a bit of detective work, lets first try the easy solution: -.
    1. go to start, run and type regedit.
    2. go to the registry editor for
    HKLM\software\microsoft\windows\current version\installer\inprogress.
    3. click the inprogress key and note the name of the file contained on the
    right to databasepath (must be .msi extension).
    4 rename inprogress oldinprogress.
    5. close the registry editor.
    6. open my computer.
    7. navigate to C:\Windows\Installer (Installer file is hidden by)
    par_defaut, views folder check "show files and folders" also uncheck "Hide protected system files", do not forget to cancel it when you're done)) and rename the file noted in step 3.
    8 restart the computer and try the installation again.
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    If it works, then Michel deserves all the accessories. At least he or she tries to solve the real problem.
  • DJ 6122 installation: Windows could not get a list of devices from Windows Update

    Try to load the printer driver for HP DeskJet 6122 on Win7 64-bit (Intel i7 - 2640M). All online sources, including HP say is another driver for DJ 990c driver required and is available by clicking on "Windows Update" in the dialog box, install printer driver. In doing so, always get message "Windows could not obtain the list of devices from Windows Update, please try again later".

    These steps solved the problem:

    1. open (Ctrl-Alt-Del) Task Manager

    2. click on tab of abuse, then Services button (bottom-right)

    3. under the name to find "Windows Update".

    4. right click "Windows Update" and select stop. do not close

    5. open the Exploper window and browse to C:\Windows

    6 delete the folder "C:\Windows\SoftwareDistribution".

    7. go to Manager tasks then Services, right click on "Windows Update", then select start.

    Then, return to the add printer function.   Be patient, it will take several minutes.  You will find that the C:\Windows\SoftwareDistribution folder has been rebuilt.

  • Get "Windows could not obtain the list of devices from Windows Update, please try again later"

    Trying to load the printer driver for HP DeskJet 990c on Win7 64-bit (Intel i7 - 2640M). All online sources, including HP say pilot is available by clicking on "Windows Update" in the install printer driver dialog box. In doing so, always get message "Windows could not obtain the list of devices from Windows Update, please try again later".

    Windows Update is set to "Download updates but let me choose whether to install them".
    Downloaded and extract full X 86 driver catalog (X 86 - all - 4189_1228a7cf7b1aac21346b20cb6e21db409dde9e72.cab) from the Windows Update site http://catalog.update.microsoft.com/v7/site/Home.aspxcatalog. 'Disc', stated in the dialog of the printer driver install and selected prnhp001. INF, received immediatelt message this specified folder does not compatible device driver.
    Also tried to do the same thing with the IA64 catalog (IA64-all - 4190_6e0f85bb67d0038a6406fc71b777a1906a87888c.cab), not surprisingly has the same result.
    Also tried to do the same thing with the AMD64 catalogue (AMD64-all - 4188_bacd1413e93b4a6362d9a2ca653c869f1c02f6f7.cab) and curiously that appear additional list catalog successfully. However, when choosing hp deskjet 990 c, as soon as the driver begins to install the error box appears saying "printer driver not installed, the operation may not be completed (error code 0x00000002).
    Cannot find any other relevant catalogues on the site Windows Update Catalog (which is X 64).
    Have tried to launch MicrosoftFixit.wu.RNP.85259331246416206.3.1.Run.exe, which is worth 1 point fixed, but has no effect on the problem.
    A short of ideas. How can I get my hands on 990c driver for Win7 - 64 Intel?
    Thank you.

    .. .the printer I'm trying to install is a HP DeskJet 6122.

    You should have clearly stated that in your first post.

    See this related thread in the Hardware Win7 forum-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-driver-for-hp-deskjet-6122/a70f56dd-5be1-4ad8-bba9-701a09f8392c

    more than 25-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=6122+deskjet&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_7-hardware&askingquestion=false

    Once again, good luck.

  • Error 80070005 when installing windows 7 SP1 from windows update

    Hello

    I tried for a few hours now get windows 7 SP1 from windows update, with always the same error: 80070005.

    I have seen some solutions and tried:

    -rename c:\Windows\SoftwareDistribution in c:\windows not worked

    -using the subinacl has failed (interesting subinacl has me some registry keys cannot be changed: access denied)

    -J' have frees as much space as possible, with as much as 5 GB free before you download sp1 from windows update

    -J' tried to stop my firewall and antivirus and even windows defender to not available.

    The following is a typical c:\windows\softwaredistribution\reportingevents.log line:

    01:58:15:055 2011-02-23 + 0100 1 161 101 {E308C4CB-8026-4C9F-8F81-067D4F3A4966} {9CAA0B4A-025E-4531-B969-AA268F32D86F} 101 80070005 AutomaticUpdatesWuApp content failure download error: download failed.

    My system is a windows 7 64 bit, up-to-date business, I had a few problems with windows update before but nothing I could solve not like this (I have my old reportingevents.log however if this can help you to help me).

    Thank you in advance for your help!

    Hello Grisha e.a.,.

    Thank you for your messages.  Please see this thread for which JW Stuart successfully helped to solve a problem with the same error code that you are experiencing.  We can't wait to hear back on your part.

    See you soon

    Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

  • KB2852386 is not clean Windows Update as expected files

    October 8 (Patch Tuesday), I installed all the Windows updates new for my system (Win 7 SP1 x 64).  I was particularly happy to KB2852386, as it should have allowed me to pick up a lot of disk space.

    The patch installed fine, and I found the button "Clean up system files" in the disk cleanup window. Using it, I found that I have 3.95 GB of files from Windows Update that can be removed (just what I expected).  So I ran the program, re-directed the disk cleanup utility to verify that the Windows Update files were cleaned and then restarted my system (it's my understanding that you should restart the system to actually get out clean files).

    When the system was stop, I received a 'Windows configure Windows updates... "(ou quelque chose comme) message."  When the system is restarted, I started with something similar, but then received the message "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. "When the message finally reached (several minutes), I got a"Stop"message and the system has rebooted.

    To restart, I found that I had to reinstall KB2676562, KB2872339, KB2882822, and IE10.  Go in disk cleanup, I found that I still 3.95 GB of files of Windows Update that can be cleaned.

    I have all this repeated several times, hoping it would work.  He never did.

    Any ideas on how to get it to work?  Alternatively, is there a way to clean up the files manually?

    The fact that the link exists does not guarantee that the two stores are not synchronized, it is just an indicator.

    It seems to me that all drivers in the package of the remote desktop client are corrupted.  Which may also extend to the whole of the remote desktop services, because they are both installed at the same time by a single KB (KB2592687).  This is the package (8 Remote Desktop) of "RDP8".  If my assumption is correct, then you need to remove the headings for all these drivers:

    BTH.inf

    tsgenericusbdriver.inf

    tsusbhubfilter.inf

    termkbd.inf

    termmou.inf

    There's a 2nd number at work here, however.  RDP8 package you have not actually changed.  Instead, a package that depends on a, and when the package which it depends is scheduled to uninstall which makes RDP8 also eligible to be uninstalled.  This package is known as the 'DTLS' (KB2574819) package.  You probably version v1.007 of the DTLS package, which has a bug in its packaging that allows him to be replaced and removed, while RDP8 is still in need of him.  The difficulty that you can install the package here DTLS v2.000 version: http://support.microsoft.com/kb/2574819/en-us

    My recommendation is to get through with the cleaning, remove the registry entries for the above inf files and allow the uninstall to complete.  After that, I suggest that you run the update of the tool (checksur.exe) system to see if there are any other corruptions which need to be repaired.  Then download DTLS v2 and install and re-install the package RDP8.  (available here: http://support.microsoft.com/kb/2592687/en-us)

    If all goes well, which should eliminate the known corruption problems.

  • Unable to upgrade to Windows 8.1, Windows store does not and will not install Windows Update.

    Original title: hard to upgrade to 8.1 - My App store Windows will not open, Windows updates Pc settings does not.

    Everything on my laptop is saying that it is "not responding" - opening of the photos, for example. My apps are no longer compatible - for example my e-mail address is not updated. I think it's all related to not updated to 8.1 - having a knock on effect to all the other bits on the laptop.

    The problem is won't let me upgrade. I understand that it is a slow process, but it won't let me even go up to the store to upgrade. What can I do?

    Really sad about that I just bought my laptop 3 months ago a result already loads of problems with it. (ACER LAPTOP WINDOWS 8)

    I had the same problem and finally came up with this fix. I hope it works for everyone who suffered from this annoying problem. Go to control panel, system, and security, the Action Center. In the center of the Action, open the settings Windows Smartscreen. Do not do anything (turn off Smartscreen Windows) check.

  • Service Pack 2 from windows update

    I am trying to download service pack 2 for windows xp home edition from windows update and is not download it.

    You can download here:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

    It is for single PC as well.

    TaurArian [MVP] 2005-2010 - Update Services

  • Do not install Windows Update KB968930 PowerShell 2.0 and WinRM 2.0. Error 0x8007F070

    XP SP3... Do not install Windows Update KB968930 PowerShell 2.0 and WinRM 2.0. Error 0x8007F070

    I uninstalled the .net framework and reinstalled from the beginning. Still not get it to take, any help would be appreciated.

    Thank you

    Try ' Haralambos Mavromatidis solution suggested this feedback connect.microsoft.com poster:

    Problem was resolved by resetting the security - choose your own switches or use the following for a newspaper at the root of C: file by typing the following in a command prompt:

    %windir%\system32\secedit.exe / configure %windir%\repair\secsetup.inf /db secsetup.sdb/log C:\secedit.log /verbos /cfg

Maybe you are looking for