313w printer has left
I have a 313w printer that has stopped printing. Window opens indicating 'impression', but nothing happened. After several attempts, I tried the new facility. Now, I can't even the printer to work with usb cable (nothing happens, although says "printing"), and shows that the wireless orange light. I do not have the Wi Fi Protected button on router (it does not), so I'm lost how to get this printer is installed and working. The printer refers to the method of the PIN, but I do not know where to enter that info. Any ideas? Thank you.
Problem solved. Apparently uninstall doesn't remove all. Has gone through the list and there was an another listed 313. Once who has been uninstalled, everything went well. TX for you time.
Tags: Dell Peripherals
Similar Questions
-
My printer has left the copy. It has dark lines across on the page.
I have a printer/C309 Photosmart Premium Web. Recently, he stop making copies readable and done the same thing on the scans. I tried to close all and which did not help. I can get the printer to print a test page.
My OS is Windows 7 32 bit.
Hello mojedo
Please try the following article. It can help to solve the issue you.
-
How can I determine how many pages my Laserjet 1020 printer has printed in his lifetime?
I am trying to be proactive in determining if I need to plan to replace my printer Laserjet 1020. I know I've seen some resellers/refurbishers typescripts which show the number of pages that a printer has printed during his lifetime. I just trying to figure out how to get this information from my printer so that I can see how he left life. Can someone tell me how to generate this report?
Thank you!!
Hi davesuff,
You should be able to view the printed pages in the pilot. I would like to know if it works?
1. printing options
2 tab basics
3. click on everything.
-
PSC 2510 double prints the left margin - transport stops
Hi, my 2510 double print the left margin so as to look as if the letters are ghosts, now it started to leave a wide width of letters about an inch from the left margin. At the same time, he will start a print job only to have the transport stop about 1/4 of the way, I have manually position the carriage to the position of Park - the menu says so is printing - it is not. I unplug the AC for 10 seconds and when I reconnect the printer resets and continues its merry way, until at the latest. Thank you Kent
You probably have a buildup of ink on the MICR band used by the printer to tell where is the transport. Gently clean the Strip as shown here. Don't forget to respect the warnings, if you do not you may damage the delicate MICR band.
Kind regards
Bob Headrick, Microsoft MVP printing and imaging -
Windows Dvd maker has left the audio recording
Windows Dvd maker has left the audio, what have I done wrong? It will record video but not audio. I have other software installed on PC that works fine, so I don't is not material, it Mathilde do something with dvd windows creation parameters. What do you suggest me?
Hello
Windows DVD maker has all the features as other programs. I use it for this reason. Try a newcreation of DVD Windows downloadand see if that makes a difference.
I use Roxio 2012 Pro to my video, burn them to DVD.
-
model printer officejet 4500 printer all in one, running windows XP
The printer has changed its own police force. I can't find anything to restore. It is incredibly small and difficult to read. I tried to restore the default values that did not work.
OK when you open firefox go to file > Page Setup > ladder.
Change the size of the scale and see if it makes a difference when you print.
-
CHANGE OF E-MAIL OF THE HP PHOTOSMART D110 PRINTER HAS
CHANGE OF E-MAIL OF THE HP PHOTOSMART D110 PRINTER HAS
Hi @HOMERO
Welcome to the Forums of HP's Support. I think that you are asking how to change the email ePrint printer Photosmart D110a address.
I've included the document setting upward a Custom E-mail address for HP ePrint . It will guide you in how to customize ePrint printer address. There the steps if you are already registered and you have not saved.
Please let me know if I misunderstood your message.
-
My version of windows is replaced by windows 10 and my hp printer has been disconnected. Please help me to connect without disc
The problem is not yet ressolved. The printer cannot connect to the wireless router.
Test report says wireless network name (SSID) found "Fail".
-
When I print, the left side of the page is faded or unclear
Original title: print printer print
When I print, the left side of the page is faded or unclear
Hello
Uninstall and reinstall your printer by using the drivers and the information at your printer manufacturer's Web site.
Equip your printer model and operating system it for this information and it should also be troubleshooting steps for her also.
See you soon.
-
Printer has slowed in the print queue
Original title: the printer has slowed during printing that
Over the past two days, print PDF jobs slowed much.
Hello
1. what version of Windows is installed on your computer?
2. What is the number of brand and model of your printer?
3. have you made any recent hardware or exchange of software on your computer before this problem?
4. you receive an error code or error message?
5. do the same thing happens when you print other documents/files?
Please provide us with more information on the specific question to help you to fix as soon as possible.
I also suggest to follow the below links:
Method 1:
Diagnose and automatically fix problems printing and printer:
http://support.Microsoft.com/mats/printing_problems/
Method 2:
Printer in Windows problems:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
I hope this helps.
-
HP Photosmart C309a printer has error 0x61011be5
My printer has a gear grinding noise and the 0x61011be5 error message. You will find a short solution to buy a new printer? Thanx
As OEM HP is responsible for the good operation of the printer and their drivers. Check with
HP support, their documentation online and drivers and ask in their forums.HP - Photosmart Premium Fax all-in-One Printer - C309a<- product="" support="" and="">->
http://h10025.www1.HP.com/ewfrf/wc/product?product=3737195&LC=en&cc=us&DLC=en&lang=en&cc=usHP - Software & Driver Downloads - HP Photosmart Premium Fax all-in-One Printer - C309a<->->
your version of Windows.
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3737195&LC=en&cc=us&DLC=en&lang=en&cc=usSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
my printer has stopped printing. The issuance of documents in Quebec and he says the first line is printing, but it is not.
Hello
1. what version of Windows is installed on the computer?
2. What is the brand and model of the printer?
I suggest you to follow these steps and check if that helps:
Method 1:
Try to run the printer Troubleshooter and check that if it helps, here is the link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterMethod 2:
Try to run the below fixit and check if this may help:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-printIt will be useful.
-
I feel, then the printer has got a pad of paper, I pulled out the paper, but the printer does not print more. I don't know what happened.
Hello
- What happens when you try to print now?
- You receive an error message when printing?
- What version of Windows are you using?
- What is the brand and model of the printer?
You can check these links:Printer in Windows problemsWhy can I not print?Try also to turn on and off the printer and check. -
HARDWARE ICON SAFELY REMOVE A MISSING SINCE HP PRINTER HAS BEEN CONNECTED TO WINDOWS 7
HARDWARE ICON SAFELY REMOVE A MISSING SINCE HP PRINTER HAS BEEN CONNECTED TO WINDOWS 7 ON MY VAIO LAPTOP. HOW THIS CAN BE FIXED. ALL THE ALTERNATIVES ON THE FORUMS OF WINDOWS FAILED
Hello
Thanks for posting in the Forum from HP Support.
Please, use system restore to restore your files and settings Windows system to a well known state before this "junk" change that's happened.
Here is more information on restoring the system-> http://windows.microsoft.com/en-us/windows/what-is-system-restore#1TC=windows-7
Instructions on its use on Windows 7: http://support.hp.com/hr-en/document/c01835735 & http://support.hp.com/hr-en/document/c01835735#AbT4
Please, let me know if I can help you further.
-
A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.
A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB. The printer is running the latest firmware. The PC is running the latest 64-bit drivers with no problems to the host machine printing. The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network. The printer is configured to share with the share name of HPDJ500.
Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer. Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK. At this point, I get an error that says: "Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server. For more information, click Help. »
Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector. This window also disappears as soon as I clear the error message.
Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field. It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message). On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.
How connect to this printer?
Try using the path UNC path of the printer in the Add Printer Wizard.
Add a printer > network printer > connection to this printer ((deuxieme point)
Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path
Maybe you are looking for
-
Netflix is HD quality immediately, itunes movies take hours - WHY?
Why do Itunes movies/tv shows that I buy or rent take hours to play, whereas Netflix can play in HD quality now? I know that Netflix has adaptable download, but the quality of the shows/movies Netflix is HD (IE, netflix shows being do not appear in
-
HP Pavilion dv1000 blocked BIOS of forgotten password
Help,... to set a password for boot and now forgotten, attached 1000s but constantly zero. 15819 disabled system message
-
BSOD on dxgmms1 when you play using 8 GB of ram. Solid running 4 GB.
Hi all I just built a brand new when computer a new installation of Windows 7 Edition Ultimate 64 bit. This computer has never had any other OS on it. I'm having a problem when you play Dragon Age Origins that the computer with BSOD when I have 8 GB
-
C5180 is now asking for the introduction of cartridges
Finally got a list of errors, power button continuously, the pump blocked, paper jam engine (was not), turn off with On / Off button, etc.. Several times I left the printer and eventually he did a lot of mechanical noises and then allowed me to print
-
CD-ROM and CD of the emulated devices stopped working
I tried to clear up some errors in the case of newspapers, including related Microsoft Security Essentials and I ended up uninstalling and reinstall that. My CD/DVD drives stopped working after a reboot. I checked the BIOS Setup, and they have been r