320 gb External Hard Drive - now detected as Cypress device

Similar Questions

• simple save 320 GB external hard drive

  I have a HP simple save 320 GB external hard drive.  When I plug it into my lap top, I can hear it loading, then at the bottom right corner I see the icon that allows you to remove the material safely; However I don't see the device anywhere.  Can someone tell me how to solve his problem?  I have to update the divers?  I'm so confused!

  Ok thank you.  I disassembled and connected like that.  I guess I'll have to ship.

• Toshiba 320 GB external HARD drive make my very slow computer

  Hello.

  I bought this product a few weeks ago now, and every time I use it, it makes my computer go tp so slow to the point where I can't actually do something on this subject, due to the fact that everything becomes inadmissible. Also, the rate at which I transfer files to it is also very slow. Any ideas why and what I can do to speed things up a bit?

  Thank you.

  Hello

  You suggested that the laptop becomes slowly during the use of the external HARD drive.
  I guess that transfer you a data from the HARD drive internal to the external USB HDD.
  I think that it s not very rare, that the laptop runs slowly during the transmission of the data.
  It depands on the program that runs in the context of the operating system.

  I put t know which interface you use USB2 or USB only, but data transfer depends on the interface.

• Toshiba 320 GB external HARD drive all of a sudden think this is my 160 GB drive!

  PC: Toshiba Satellite A305D-S6848
  Accessories: Toshiba 320 GB USB external hard drive; MODEL: HDDR320E03X
  Toshiba 160 GB USB external hard drive;
  MODEL: HDDR160E03X

  The other day I started my laptop with these two drives already connected. Suddenly, my 320 USB drive, that's half full of music and video, insists that it is the only capacity of 160 GB and if it is full but shows no files.

  I already tried to run diskcheck... nothing helps... Suggestions to recover the date on this drive because it is only a few weeks old and has all of this information on this subject.

  Thanx

  It works on another PC? Maybe the user has installed a bad USB driver or something.

  If this does not work on another PC, you can try data recovery tools. Google search for "data recovery utility.

• PX1268E 400 GB external hard drive not detected

  Hi all

  I bought a Toshiba external hard 400GO USB Drive of DABS it delivered without a CD Rom. I plugged the USB cable into the computer, but it did not detect the drive, even after re - starts or try other USB slots. Not shown in Device Manager. I probably need this CD to complete the installation Yes? Download the installer from here?
  Any info/advice gratefully received.
  see you soon

  Hello

  I don't know if this external HARD drive needs an additional but installation CD everything must be shipped with the HARD m disk box!
  To my knowledge this HARD drive needs an external power supply. The cable must be delivered also with this HARD drive.

  So take your manual HDD and check shipped all parts! If something is missing you dealer of HARD drive!

  PS; the CD cannot be downloaded on the net!

• External hard drive not detected

  I have an external hard drive of 4 Marine to... .and a Macbook pro with the latest El Capitan... When I connect the external hard drive for Mac pro, an external hard drive can not detect, but there is a light flashing on the external hard drive. It worked well until last night after I used iTunes and went to another Mac. I still eject properly.

  Any ideas on how to solve this problem

  Try using disk utility to repair the disk. If the drive does not appear in the disk utility list, then he dies. Contact the manufacturer or supplier.

  Shut down the computer, disconnect the drive. Wait five minutes and then reboot and reconnect the drive.

• How to recover my data stored on an external hard drive now that I use a MAC

  I bought a Sea Gate 2 to external hard drive for my Dell PC a few months back.  It saved my whole computer and check everyday for any extra stuff back up.  Recently, I switched to a MAC, and in a prime time could not open at all.  However, I called door seafarers and they helped me set up my Mac so now I can open it as a hard drive.  However I still do not see the material recorded from my PC.  I was told that Windows has somehow compress the files when it is saved as a backup, and this is perhaps why I can't see my old files.  If anyone has any ideas I'd love to help.

  It's really a question you need to ask the experts of Mac (choose the forum that pertains to your variety of Mac).  However, the information that anyone who will help you needs to know is what software created backup files.  In other words, what "saved" your computer?

  For example, you use Windows Ntbackup?  You use software provided with the Seagate drive?

  If you can open the Seagate on Mac disk, configure your Mac to be able to show file name extensions (the letters after the dot): http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh825.html and register this file extension to your aid application.

• If I saved photo on an external hard drive, now remove the laptop backup files to free up space?

  If I saved photo on an external hard drive, I can now delete backup files from the laptop for free space - my 'E' drive is full and cannot run backups more.  Also other documents that have now been removed still have backups that I need?  How will I know what backup should I keep not individually through hundreds of files?  Thank you in advance.

  Original title: can anyone help please?

  Hello

  You can take a safe backup.

  After you create your first backup, Windows backup will add new information or changed to your subsequent backups. If you save your backups on a hard drive or network, Windows backup will create a new backup, full for you automatically if necessary. If you save your backups on CDs or DVDs and could not find an existing backup disk, or if you want to create a new backup of all the files on your computer, you can create a full backup. Here's how to create a full backup:

  1. Open backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.

  2. In the left pane, click on create new, full backup.

• External hard drive not detected in Windows 7.

  G ' Day,.

  I have a 1 TB external hard drive.  It is recognized by my new computer, but not by the 8 year old.  I use Windows 7 and is updated daily.  Please could someone tell me what I should do to get the old computer to recognize the H E drive please.  The hard drive is a WD and almost new.

  Perry has soon

  Hi Perry,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that your external hard drive is not recognized by your computer.

  This could happen due to some system conflicts.

  I need some information.

  1. What is the make and model of your computer / external hard drive?
  2. You get no matter what error code or error message?

  Try the methods.

  Method 1: Run the hardware and devices Troubleshooter

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Step 1: I suggest you check in Device Manager if the external drive is listed there.

  1. Connect external hard drive to the computer.
  2. To open Device Manager, type devmgmt.msc in the start search box and press ENTER.
  3. Check to see if the external hard drive is listed.
  4. In Device Manager, expand the hard drive listed in the list of devices.
  5. If the hard disk is listed, are doing a right click on it > click Properties.
  6. In general, look under device status for the message. After back if there is no error message.

  Step 2: Check if the external drive is detected in disk management.

  If the hard drive recognized in disk management and if there is no drive letter assigned, I suggest that you right-click on the drive and assign a drive letter and check to see if it helps:

  Reference: http://windows.microsoft.com/en-US/windows7/Change-add-or-remove-a-drive-letter

  I hope this helps. Please let us know the results. We will be happy to help you further.

• External hard drive not detected in Windows 8

  I just bought a Dell XPS 13, running Windows 8.

  I have two external hard drives from LaCie.

  Disc 1 is used with a Lenovo X120e running Windows 7.

  Disc 2 has two partitions, exclusively for my Macbook Pro running 10.9.5 and the other smaller partition is used to move files between Lenovo and the Macbook.

  When I connect Drive 1 to the XPS 13, nothing happens. It is not turn nor it appears in Device Manager.

  If I turn it on to Lenovo, it works very well.

  When I connect Drive 2 to the XPS 13 (to the same USB port and using the same cable), he turns and is detected.

  If the port is working, pilots work, cable works and Drive 1 works when connected to the Lenovo running Windows 7.

  How can I get the XPS 13 to recognize Drive 1? There must be a way to do this without formatting again.

  Thank you.

  The drive is visible in the BIOS or the mode without failure on the XPS 13?

  You can also try to paginate the connection of the power supply in the drive that works.

• I have a problem with the external hard drive not detected on the computer as a disk.

  I connected an external hard drive toshiba via USB on this victory 8 x 64 computer that is also a toshiba and the computer doesn't show as a reader in fact it shows that he as a device so what gives. This thing have not even a letter such as C: (what internal hard drive) I watch the little arrow to show you, it is prudent to remove it so it appears here, what does I have a drive bad ext or what? Oh yes, I have tried all my ports even

  Hello

  I suggest you to assign a drive letter for the external hard drive and see if it helps.

  To do:

  a. press the Windows key + R and type diskmgmt.msc.

  (b) if the hard drive recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.

  c. right click paths and the drive letter Change.

  Do one of the following:

  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use and then click onOK.

  ·         To change a drive letter, click change, click on assign the following drive letter, click the letter you want to use and then click on OK.

  d. restart the computer and check.

  Hope that the external hard drive will not be detected after that.

  Please report if you encounter any problems related to Windows and we will be happy to help you.

• External hard DRIVES not detected

  I recently encountered a problem in the recognition of external hard drives of the company. But the usb recognizes pen mouse drivers, card readers etc... can someone help me pls.

  I use HP pavilion G6 2005ax win7 ultimate.

  If it is not giving an error message but it is to let you manually assign a drive letter, then the automount can be disabled (enabled by default).  See the jeffsrawr response in this thread to turn automount.

• External hard drive not detected with the error: "You must format the disk in the J: drive until you can use it."

  Hello

  I have an external hard drive to work perfectly. I'm back from vacation, and it does not appear under "My Computer". It appears under "Devices and printers", however. This is a link to a screencap of Device Manager: http://i.gyazo.com/9e91e1d71ed32c55dba0419e79b499d5.png

  The device in question is that of J:, and it says here that he has 100% free space, that worries me, because he had only 50 GB of free space when I used the latter. After that I open the disk management, I get a pop up message saying: "You must format the disk in the J: drive until you can use it."

  How can I get my hard drive appears again?

  Thank you

  Original title: external hard drive not appearing is not in Windows 7

  Hi John,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  According to the error message, I suggest trying the suggestions posted by the NakulShridhar responded on 14 October 2011 and by that alexquiteguy replied on 13 January 2011 in the thread following link and check if it helps.

  "You must format the disk in drive J: before you can use it"

  [Steps apply to Windows 7]

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Hitachi external hard drive not detected on Windows 7. Disk Management displays "No Media"

  OP: New computer with Windows 7 cannot display files on external hard drive Hitachi

  My Hitachi hard drive is compatible with Windows 7.  This hard drive was working properly with my old computer using Windows XP.  I can see the device in the Device Manager, but I can't view the files.  In disk management, the drive is listed at the bottom of the screen, but said "No Media", however there is almost 50 GB of data stored.

  The hard drive shows in the list of devices and printers when I opened that folder, but does not appear in the list of hard drives on my computer.

  I still don't understand what happened, but I've decided how to fix it.

  After trying my hard drive locked on 4 computers with Windows installed (two with Windows 7) and two with XP and having no success, I decided to plug it into a computer using a Linyx OS (Obuntu).  The computer recognizes my hard drive and open.  Then I was able to use the Windows System.  I managed to freeze hard drive again and he cured the same way.  Maybe this will help also, if you have access to a computer with this operating system.  Maybe a mac would also work.

• Drive external hard drive does not appear under "devices."

  Hello

  I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.

  I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).

  The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.

  I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.

  I do not want to clear the contents of the external HARD drive.

  Is there a way to get my external HARD drive works as expected with my MacBook?

  Thank you much in advance.

  I also have this problem.

  My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)

  * Edit *.

  

  My HDD show in report system > hardware > USB

  but it does not show in Finder or Desktop.