33 SideBySide error: Windows Vista 64-bit

Similar Questions

• HP HDX Windows Vista 64 bit laptop with error 1002 of the recovery process

  Hello

  I have laptop HP HDX which had a sound problem with message of error "Could not play the test tone", tried in several ways by online suggestions and ended to reinstall the new copy with recovery disk. As part of the recovery with a reovery of HP drive, I tried to get it back and it formatted boot partiion and got this error message "error 1002 if the problem persists, please contact HP support. My laptop is out of warranty now.  I talked to HP support and they ask me to buy new drives recovery and someone in this forum mentioned that recovery disk will lift the same mistake and we would need to purchase technical support and even that has not worked for soembody after paying $ 200 to support. I am struck with recovery of the laptop now. I also tried the recovery partition revovering and gave rise to no luck.  I'm now out of warranty.

  I am really fedup with bearing on my this laptop windows vista 64 bit HP HDX laptop problems. What is your best suggestion for me to recover my windows vista now?

  Thank you.

  GK

  I ordered the drive to restore HP for $ 16 and I have no problem in my OS with this disk recovery. Recovery partition that came with my laptop had this error 1002 and he really tortured than me. It is recovered successfully with this new disc of recovery with on all issues.

  I would have saved a lot of time, would not have had any stress and restore ($16) if HP disks price had built the free bug recovery partition.

  I'll be very careful in buying HP products in the future.

  Peace out.

• get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

  I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

  Laptop is a HP Pavilion DV6700.

  Any help would appreciated more than you know.

  The system is Windows Vista 32 bit

  The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

  Hello:

  See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Windows vista 32-bit update service pack 1 error 80073712 when I try to install.

  I tried and tried to install the updated Windows vista 32 bit service pack 1, but also try to update manually, however I continuously get the update error 80073712. I tried the scan tool update service, troubleshooting automatic on the Microsoft Support Web site, as well as research on the Microsoft Answers site for more assistance. However, I still have the same problem, then what else could be the cause so many dell used laptops for not updating this service pack. Either way, I haven't installed service pack 2 either, as I mentioned on some of the answers.

  Microsoft says that the operating system is corrupt, so SP1 or SP2 fails. Follow this link for repair.

  https://support.Microsoft.com/en-us/KB/957310#/en-us/KB/957310

  In addition, the article is ok, but he fails to mention that, after analysis of the Sfc runs, must complete the process.

  It is, done Sfc, you must also type: CHKDSK C: /F agree to restart, type: EXIT

  restart the pc... When the computer reboots, the repairs are installed/fixed, w/o this cmd, just retry the update is not

  possible, installations/repairs, can take place only when the pc is restarted...

• network Realtek 8900 8968/8111 adapter gives me an error code 10 in windows vista 64-bit

  I just reinstall a new copy of windows vista 64-bit on my laptop after 3 monts of waiting to get my hard drive. After installing windows (is there NOTHING else on the hard drive) is an error that says, basically, that the adapter will not start. I have uninstalled the driver and tried to upgrade to the latest version of the software and it doesn't help, either. It is a Pavilion dv7, moreover, and I went to the hp site. Thay no longer even support this model of laptop.

  Hello Christopher Lewandowski,.

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with the network adapter not starting not not by error code 10.

  Proceed as from the link below and check.

  Network adapter problems

  Meet us if you encounter problems with the NIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista 32 bit OS. Corrupt or missing files and error msg "invalid parameter."

  Windows Vista 32 bit OS. Corrupt or missing files and error msg "invalid parameter."

  Original title

  I don't understand what you mean by "title". You want a test?

  Hello cock.

  Please see the TechNet wire which may be related to your current number:
  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/d1d5e820-4b3f-4848-8861-8c0736c5fd1a

• How can I fix the error Code OxC000005 Access Violation (Windows Vista 64 - Bit)

  How can I remove error Code OxC0000005 breach of access to my Windows Vista 64-bit computer.

  Thanks for your help.

  Hello

  1. When you encounter this error message?
   
  2. what hardware or software change has been performed on the computer before the question?
   
  Follow the links below to solve the problem.
   
  Method 1
   
  a. start your computer in safe mode
   
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  If the problem does not occur in mode without failure, then search software conflict third party by following method 1B.
   
  b. how to solve a problem by performing a clean boot in Windows Vista or in Windows 7
   
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned above to start the computer normally, once you have completed the necessary troubleshooting.
   
  Method 2
   
  Analyze the computer for violations of integrity and corrupted files.
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  
  http://support.Microsoft.com/kb/929833
  
  Method 3
   
  An application may stop working unexpectedly on a Windows Vista SP1 or Windows Server 2008 computer
   
  http://support.Microsoft.com/kb/967227
   
  I hope this helps.

• Windows vista 64-bit Defender encountered an error: 0x800705b4

  Windows vista 64-bit Defender encountered an error: 0x800705b4. I am trying to start my defender and have been unable to accomplish this.  I tried to start the Defender Service service and Application and then turned off the Security Essentials again tried to start the program, none of these options worked on the start program.  I'm unable to find other options to get going.  (Oh, I've also updated my CODECS)  Thanks for your help.  Address Email Julie * retired privacy *.

  Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the foregoing explains the common compatibility issues with Windows Defender and MSE.

  As the version of Vista's Defender is not designed to work in conjunction with MSE, there is no point trying to start it.

  See you soon.

  Mick Murphy - Microsoft partner

• fatal error installation software photosmart c7250 on windows vista 32 bit

  Problem with uninstall and install the driver software print on my PC - printer is HP Photosmart while a C7250 - wireless network connection

  My printer worked for many years.  Then some of the features of the photo printing had stopped working - I think because there may have been a conflict with several on my PC HP printer drivers.  So I tried to uninstall all the HP software (via the uninstall of the window).  All successfully uninstalled except:

  C:\Program files/hp/digital imaging\esupport\hpzscr01.exe

  C:\Program files/hp/digital imaging\ocr\hpzscr01.exe

  C:\Pro...

  C:\pr...

  I could manually the files to uninstall the first 2 because I could see where they were.  But I have no idea about the other 2 given that the error did not display name as you can see.  I tried to install anyway (using the HP Solution to install errors - Windows Vista).  Followed all the instructions.  Installing the latest driver/software (downloaded from the HP site) obtained in what concerns my wireless printer detection; then it gets stuck at the stage of configuration at 96% for 15 minutes - DURATION situation 07417929 error code.  Help!  I think it is because I can not uninstall these ghosts files.  does anyone have advice?

  ---------------- More INFO ---------------------

  After the above, I am able to print in the way of basic - but my HP Solution Center software and not operational.  Message when I try to open Solution Center is "no devices found habe HP."

  I have a LOG file with some PRT screens that I wish I could join this note (can not know how to do).  It can give some more errors.

  I finally solved this problem.  The solution was to perform a full system restore on my PC - returned to the factory settings.  Do windows, software updates re - load manually (including the software of pinter), manually the saved copy of data.  It seemed to work.  So everything comes into conflict that was on my PC was a bit too complex to adhust without having to do this VERY long process.

• Package of added value and Windows Vista 64-bit on Satellite P200

  Hello, recently I changed Windows version of 32-bit to 64-bit. Everything works perfectly except PPV.

  When I try to install it, it produces an error message that says:

  ID_ERR_NOTINSTALLTVALZ_MESSAGE

  I found in some old discussions that I should update my bios, so I downloaded most recent bios, and when I tried to update, the pop-up message that I already have this version.

  I did some research and I found some drivers for the 64-bit version - [link to driver | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 746 & selSho rtMod = null & language = 13 & selOS = 27 & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 61866 & DISO = 27 & driverLanguage = 13]
  and in the statement, he said that I should
  "It's only the driver of value added package for 64-bit computers. Installation instructions: 1. unzip the zip-> 2. Right-click on the "TVALZ_O.INI" file-> 3. After a right-click on the file, choose "Install" from the context menu. »
  But when I do that there is an error message that says that this INF file selected does not support this method of installation.
  I tried to install it in safe mode, but the error is the same.

  Maybe I should put these drivers in a specific location? If Yes, where?
  Who can I install everything first? VAP installation for 32 bit, then driver for 64-bit? Or maybe the other way around?

  If someone could write me a clear instruction how step by step, I would be really grateful.

  My system: Windows Vista 64-bit Ultimate with SP1
  My Notebook: P200 series

  Best regards, Paul of the Poland.

  Hmm, I wonder about this sentence
  > I've done some research and I found some drivers for the 64 bit version

  What is your laptop model number? Have you chosen the right Toshiba VAP for the right notebook series?

  If you have chosen the correct drivers (for the right notebook series) then try to copy the extracted files in the folder of Toshiba Value Package added to programs-> Toshiba-> Toshiba Value added Package.

  Then try to run the ini file as described on the page of the European driver Toshiba.

• WINDOWS VISTA 32-BIT UPDATES

  CAN SOMEONE HELP ME GET UPDATES FOR WINDOWS VISTA 32 BIT?   I AM NOT GETTING THE ERROR CODES, JUST CONTINUES ON THE LEFT SEARCH BAR RIGHT AND DOES NOTHING. NOTHING IS FOUND TO DOWNLOAD. I'VE NEVER HAD THIS PROBLEM.

  Hi BluesBlaster:

  If your initial "check for updates..." Windows Update crashes during long periods without raising an error, this is a widespread problem currently affecting many users of Vista SP2.

  Some users find that "check for updates..." will be finally run full if you let run for several hours, but there is also a workaround solution posted on the page Web of Dalai to http://wu.krelay.de/en/ that accelerates the Windows Update for the affected users. Of workaround requires users to pre-install the kernel-mode Windows updates (Win32K.sys) driver listed on this Web page, if one is missing from your system before running Windows Update.  I used Dalai for the latest Patch workaround three Tuesdays (the second Tuesday of each month) and has reduced my search for 'check for updates...' updates available for 6 or 7 hours up to approx. 25 min.

  Step-by-step instructions posted on 16 June 2016 wire m #l's updates does not, it was the search for updates to the hours are based on workaround of Dalai and will guide you through the installation process of packages update stand-alone (.msu files) for your updates Win32K.sys missing.

  As of today (11-Sep-2016) the current list of updates Win32K.sys on the page Web of Dalai is: KB3078601 (rel. 18 August 2015); KB3109094 (rel. 7 December 2015); KB3145739 (rel. 12 April 2016); KB3164033 (rel. June 14, 2016); KB3168965 (rel. July 12, 2016); KB3177725 (rel. 9 August 2016). Just install the updates that are not in your system, so if you have been fully patched at the end of July 2016 you must have to install manually the last KB3177725 (MS16-098: a security update for the Windows Kernel-Mode drivers: 9 August 2016) before you run Windows Update to install your remaining August 2016 Patch Tuesday updates.  List of Dalai will probably be revised tonight next Tuesday when the September 2016 Patch Tuesday updates (and a new version of Win32K.sys) are released on 13-Sep-2016, then you might want to wait a few days to try this workaround.

  Dalai has posted general information at http://wu.krelay.de/en/info.htm which explains why the Windows Update Agent (WUA) is currently suspended during the "checking for updates..." Windows Update.  The current v7.6.7600.256 Vista, C:\Windows\system32\wuaueng.dll WUA has not been updated by Microsoft since June 2012.
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• System Recovery Options - no operating system listed, need to load the drivers, but don't know where to find this (Windows Vista 64-bit)

  It is a gateway M6866 laptop running Windows Vista 64-bit.

  The computer does not start up--gives "BOOTMRG is missing" error at startup.  I'm trying to boot from the 64-bit of Windows Vista recovery disc.  I clicked on the "repair your computer" option, and it shows the computer loading files.  Then the "System Recovery Options" box appears and asks me to select the operating system to fix it.  The problem is that nothing has listed.  It is said that if your OS is not listed click Load Drivers.  I did, but it is said to insert the device installation media, and then click OK to select the driver.  I clicked on OK and then opens a browser window to select the file.

  I don't know which file I'm supposed to select here.  I searched online for an answer, and someone told him to go to the computer manufacturer's website and download the driver for RAID controller.  I tried to go to the site of the bridge to find it, but it doesn't seem to be one for Vista 64-bit.

  Please please help!  I have to at least be able to extract the files to the hard drive before reinstalling windows.

  Hello

  ·        Have you Configure RAID on the system?

  If you have not configured then RAID on the system, I suggest you to disable the RAID/eSATA (SATA improved) in the BIOS. Once you turn off the RAID/eSATA on the system that your basic hard disk should be recognized by the system because it doesn't require any drivers, it will act as an IDE. Once you have disabled the RAID/eSATA then booting into the recovery environment and build the Bootrec and check if the problem is resolved. I suggest you follow the steps mentioned below to rebuild the bootrec.

  Rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps:

  a. get the Vista installation DVD and pop in your drive.

  b. then restart your computer.

  c. press a key when you are prompted.

  d. Select a language, a time, a currency, and a keyboard or another input method, and then hitNext

  e. click on repair your computer

  f. click the operating system you want to repair, and then click Next

  g. in the System Recovery Options dialog box, click command prompt

  h. type bootrec /rebuildbcd and then press the Enter"" key.

  ·        If Bootrec runs successfully, it will present you with the installation of a Windows directory path. To add the entry in the BCD store, type Yes. A confirmation message appears that indicates the entry has been added successfully.

  ·        If Bootrec cannot findany lack of facilities of Windows, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order shown below: (remember to press ENTER after each command)
  bcdedit/export C:\BCD_Backup
  Ren c:\boot\bcd BCD.old
  Bootrec /rebuildbcd

  i. restart the computer.

  For more information, see the article mentioned below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Im trying to install the Nvidia drivers for my new video card and its saying that my operating system (windows vista 64-bit) is not compatible, which means they are 32-bit drivers, it's fake.

  Im trying to install drivers for a Nvidia Geforce GTX 260 on my windows vista 64 bit computer. Every time I have try and start the download, it is said that my driver is not a 64-bit driver, which is false, and that my system is 64 bit, which is true. SO... after I click 'OK', it begins to download only to have another pop-up saying "Setup has detected that the system in use is not windows vista 64 bit" which it is. Basically its contradiction with himself. im confused.

  Im running windows vista 64-bit.

  I just upgraded to a Nvidia 9800GT, to a Nvidia GTX 260.

  In frustration, I deleted all the old drivers, but the new will not download.

  The first error says that the drivers are not 64-bit.

  The second error indicates the operating system is not 64-bit.

  Let the site nVidia Driver detect your video card. If it still does not work, contact nVidia for a solution... Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.