3480CT, device not found driver Portege

I have a problem,
I have a laptop toshiba portege 3480CT and is not an operating system. I am trying to install win98 SE, but when it starts to install this message appears:
device not found driver: "OEMCD001."
Invalid device CDROM drivers selected

: so, how can I get these drivers, the computer has only CD-ROM drive, FLOPPY No.. CDrom drive is a pcmcia drive.
Please help me!
:)
I also tried to install XP pro but with bad results, it gives errors when it tries to start the windows installation...

WHAT to do, any help much appreciated!
Thank you

Hello

If you have installed WIN 98SE on the device you need Toshiba drivers and utilities.
Win 98SE OS you install all the applications in the following order:

Display drivers for Windows 95 (for S3M7 Savage MX/IX) V4.11.01.7006 - 7.02.88 - 01
YAMAHA AC - XG Audio Driver for Windows 95/98SE V.4.07.1011
Floppy disk Win98 companion W98C09
Logitech MouseWare for Windows 95/98 V8.37 BLD246
V5.77 - MR577ALL004 modem driver
Driver for TEAC V.1.06t (FDD Version 1.08 t) USB floppy drive
Driver drive disk USB for YE - DATA V.4.30 Beta
Panning of Driver Support (panning.sys) V3.0 (included in the display driver)
Multi Media Port Replicator IDE Driver V.1.1.2.0315 with the file catalog
Driver NDIS for V.2.21 de MSIR3.0 (driver Win98 OBOE)
Toshiba Fast Ether LAN adapter (Intel 82559) V.2.01
HALLOC. EXE (included in the Toshiba utility) V2.0
Toshiba W983480US utility
PCMCIA. INF for Windows98SE (support ToPIC100) V1.0
QFE Win98Gold/Win98SE QFE KB:Q239697
QFE Shutdown QFE Q242934
QFE DiskTsd.VXD V.4.10.2223 Q246387xx8
NDIS QFE Q243199 QFE
QFE Win98SE USB QFE Q241084
Direct X 7.0
Acrobat Reader
The users manual PDF file
File PDF Manuel Modem internal
Multi Media Port Replicator manual PDF file
Toshiba wallpaper
MS URL security update

For Windows 2000 / XP in this order:

Display driver
TVALD
TOSHIBA Power 2 extensions
Toshiba Utilities
Toshiba Mobile Extensions
Energy saving of Toshiba Display Driver
Toshiba infrared driver
Toshiba IDE driver
Acrobat Reader 4.05
Operating instructions online
Online modem manual
Online manual users to multimedia Port Replicator
Audio driver
Driver Modem
Country select utility (included with driver modem)
Copy Toshiba wallpaper in c:\winnt
Apply Service Pack 1 for the system
Activate "Show the components of the" unplug or eject hardware trayicon
Reinstall the display driver to support the new graphik S3 chip

All the drivers you can find on the Toshiba site:
http://EU.computers.Toshiba-Europe.com/
Please let me know if it has been successfully

Best regards

Tags: Toshiba

Similar Questions

  • Creative WP-250 - Bluetooth Peripheral Device not found Driver

    Hi guys,.

    I Peel my new WP-250 Bluetooth headset, but I still can't use it with windows 7 :(
    It keeps giving me Bluetooth Peripheral Device not found Driver and I can't use it yet as a headset.
    I looked for a driver for the Bluetooth device, but can't do much to fix the problem...
    can help?
    THX!

    Hello

    Try to uninstall and reinstall Bluetooth drivers on the computer manufacturer site.

    ' 1. navigate to the Device Manager ' ' Control Panel ' - or - comes with the right button on the icon my computer and choose 'Properties' and then click on 'Device Manager' of .

    2. Browse Bluetooth devices and right-click on the Bluetooth driver.

    3 uninstall the Bluetooth driver and restart the computer.

    Visit the computer manufacturer and download the latest drivers for Bluetooth.

    Now, try to pair with the Bluetooth device. If you always the same error message, follow these steps.

    1. in the Device Manager, you will see a "unknown device" named "Bluetooth Peripheral Device"

    2. right click and click on "Update driver software" - or - anyway find you easy bring up the update of the driver window.

    In addition, get in touch with creative Support and get the drivers for the Bluetooth device.

    http://us.creative.com/contactus/

    Hope this information is useful. If you have any questions, let us know.

  • Bluetooth Peripheral Device not found Driver for win 7 32 bit Hp laptop, G62

    Trying to connect a peripheral device such as a mobile phone or tablet, it becomes discovered by the laptop but system (win 7 32 bits) says he needs troubleshooting.

    To troubleshoot, the system attempts to update the driver one finally says:

    "Bluetooth Peripheral Device not found Driver"

    What is the solution?

    Please try this:

    To work around this problem, follow these steps:

    1. Open the Microsoft Management Console (MMC) Services snap-in. To do this in Windows Vista/W7, click Start typeservices.msc in the box to start the search , and then click Services in the list of programs .
      If you are prompted for an administrator password or a confirmation, type the password, or click continue.
      To open the snap-in Microsoft Management Console (MMC) for Services in Windows XP, click Start, click run, typeservices.msc, and then click OK.
    2. Double-click the Bluetooth Support service.
    3. If the Bluetooth Support service is stopped, click Start.
    4. In the list of Startup type , click Automatic.
    5. Click the log .
    6. Click Local System account.
    7. Click OK.
    8. If you are prompted to restart the computer, click Yes.
  • my hp leptopavillion g6 2225tu drivers ethernet and pci device not found driver send me driver please

    Ethernet Details o\is PCI\VEN_10EC & DEV_8136 & SUBSYS_183F103C & REV_05 PCI\VEN_10EC & DEV_8136 & SUBSYS_183F103C PCI\VEN_10EC & DEV_8136 & CC_020000 PCI\VEN_10EC & DEV_8136 & CC_0200 and pci details is PCI\VEN_10EC & DEV_5229 & SUBSYS_183F103C & REV_01 PCI\VEN_10EC & DEV_5229 & SUBSYS_183F103C PCI\VEN_10EC & DEV_5229 & CC_FF0000 PCI\VEN_10EC & DEV_5229 & CC_FF00 send please to me now and again something my WiFi internet is free but I tied with lan port it is not show and not connect

    Hello:

    You should be able to use all the W7 x 64 drivers and software for this model.

    DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

    You must first install the Intel chipset driver and reboot.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103010-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

    Then you can install the ethernet driver...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102604-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

    Then the card reader driver...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102497-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

    What is the complete model name and number of your laptop wireless network card?

    If the drivers are installed, look under the category of network adapters in Device Manager.

  • I'm unable to connect my pc to my blackberry via bluetooth. device not found driver. How to install this driver

    How to install this driver so that I can connect my c for my blackberry?

    First, you will need to check with Blackberry to see if your device supports this connection. He can't.

  • Portege R600: SIM inserted but error: "device not found".

    Hello

    Portege R600 under XP.
    Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".

    Cannot find the configuration options or anything like that in the manual.
    Can someone point me in the direction of literature?

    Thank you very much!

    Evan

    Hello

    Here you can download the latest version of 3G driver and tool:
    http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

    Here you will find a knowledge base on the topic of G 3:
    http://APS2.toshiba-tro.de/WLAN/?page=3ghowto

    and here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
    http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

    Hope this helps

  • laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

    Hey guys,.

    I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.

    I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

    boot device not found please install an operating system on drive hard drive (3f0)

    The hard drive is new and I did not not how its gives me this error!

    In addition, this laptop does not seem to boot from a cd to format!

    Any ideas?

    Thank you
    Karl

    Hey BHK6,

    I found out what was wrong! It was so simple!

    I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

    Thanks for your help anyway

    Karl

  • HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

    I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

    HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

    In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

    Below is a screenshot of what I mean.

    Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.

    The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.

    I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

  • my lap top says device not found Boot please install an operating system on your hard drive

    I was on yahoo and page froze. I hit ctrl/alt/del and nothing happened. Then, I hit ctrl/esc. I now have a screen saying device not found Boot. Please install an operating system on your hard drive. hard drive (3FO) what hurts? It is a Compaq presario CQ56-112 NR computer laptop Windows 7

    I suggest go on the link following and through the listed troubleshooting steps based on your symptoms:

    http://support.HP.com/us-en/document/c01443371

  • Windows could not install your (CEWL 1) not found driver software for your device

    After you download sony_tvupdate_2012_1158_ucf_auth

    A new folder will be created called sony_dtv026000066006_00000301

    Inserted UWA - BR100 and received the following:

    Windows needs to install driver software for your (CEWL 1)

    Locate and install driver software (recommended)

    C:\Windows\system32\new dev.exe

    Windows could not install your (CEWL 1)

    Check the support section for driver software

    Insertion of USB causes the following message: not found driver software for your device

    Hello
     
     
    I would suggest trying the following methods and check.
     
     
    Method 1:
    Tips for solving common driver problems.
     
     
    Method 2:
    Download the driver on the device manufacturer's website and install on your computer by keeping the computer in a clean boot.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

    Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

     
     
    You can also refer to:
  • Device not found Airport Extreme

    We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.

    The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.

    I have reset the AirPort Extreme to the default settings, but the problem continued...

    I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...

    no idea how I can fix this problem?

    You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.

    If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.

    Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.

    There is a solution: on a Mac, open AirPort Utility and select file > configure other...

    For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.

    Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.

    If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.

    Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.

  • Airport Time Capsule device not found

    I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014).  It integrates the latest version of the 7.7.7.  Just last week, I received the error device not found (.. .has been previously a part of your network... etc.).  The internet connection is always good and the component of the time capsule router still works.  When I unplug the device, it can find him but eventually will go down in a few minutes.  I also did a warm reboot, but some results.  Printer connected to the time capsule does not, nor does Time Machine back ups.

    Would be grateful of any advice on why the drive not found error continues to occur.  Thank you!

    You have Back to My Mac enabled on the Time Capsule?

    If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.

  • Device not found in airport 6.3.6 utility

    Running a 5th generation I'm stuck. I checked a bunch of other posts and restarted all devices, as well as reset the base station. I also adjusted IPv6 at the local level.

    When I pull up the Airport utility, I get "device not found" and cannot connect to the base station to adjust settings. What is weird is I can get temporarily in Airport utility if restart my MacBook and the base station at the same time. However, it does not last long. I also see the drive mounted in the Finder all the time. A Wi - fi connection works without interruption.

    I tried this on 2 Macbooks, an ipad and an iphone. El Capitan running. I am at a loss.

    Someone at - he was able to solve this problem.

    You are one of the many ad today with this problem.

    for example. There is only one thread.

    Time capsule not recognized in the utility of the AP

    I suggest that you can still access the AE or TC using configure others and type the IP address.

    A 5th generation is the flat and quite old but more reliable than Gen6. But beyond 5 years they get flakey.

    If you mean a 5th Gen TC then this is the newest one.

    I am surprised, he's also missing on the iOS but who was more reliable version of airport utility.

  • Not found driver software CD.

    I'm unable to copy or burn CDs more. My I Tunes tells me not found driver CD. What should I do?

    See Microsoft Knowledge base article.
    http://support.Microsoft.com/kb/270008/en-us

    First remove the CD/DVD drive device manager.
    Then, completely remove the Upperfilters and Lowerfilters from the following registry key values:

    * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} *.

    And finally to restart the device.

    After the laptop has been restarted again, you can check the ODD feature.

  • Office jet 4500 G510-g, the imaging device not found

    I have an Officejet 4500 with a wired Ethernet connection. For some reason any, that my computer has ceased to be able to scan from it, I can still print and everything very well. I don't remember to make changes to the system and other computers on the network can always analyze without any problem. I restarted my computer, unplug the printer, uninstalled and reinstalled the software, active windows firewall settings and cannot find any reason why it won't work. I am running Windows 7 64-bit on the computer that does not work, the other computers on my network that still work are running windows 7 64 bit and XP. On the "HP Imaging device not found" error message that opens under more information, I get this: 8 [(1, 0,-2147221496)]

    I've lived the HPSDU and he said: there is a problem with the driver and he cannot communicate with the product. He said also it is impossible to scan with windows WIA, and finally it's the Twain component may be damaged. I have uninstalled, reinstalled, re-downloaded the Installer off the HP site several times, but can not solve this problem. Help, please.

    Hi crakerb,

    When you click on the plus sign on the error message is that all of the information it provides?

    Because you can not install the printer using the USB connection, it seems to have some problems with the operating system on this computer. Did you back up your data and perform a full system recovery?

Maybe you are looking for

  • IPad case

    I spent a lot of money on a case from apple for my mini iPad 4; He developed cracks on the curve at the top and bottom left, I bought it on June 29, 2016, only two months before, I don't know where to write to complain about this, ideally, I'd like m

  • Why Windows Easy Transfer stuck in about 1/8 of the full path?

    I tried to transfer all my family files, settings, etc., from a full Windows Vista Edition machine, our new Windows 7 Home Premium machine.  I do this on our network.  Achievements to the party "Transfer files and settings to this computer" and it re

  • Fable: The lost chapters Installation Error 1305 and 1603

    I try to install Fable: The Lost Chapters...  I am running Vista Home Premium 64-bit.  The game worked on my old XP computer, I bought a new one and now I cam having installation problems.  When I run the Setup, he came to a file called dialogue.lut

  • Kindle for PC

    Have the Kindle for PC, twice now. Not able to open the content. Where can I open the firewall to allow content? Using Firefox browser, because the browser download on my pc. Windows XP op

  • SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

    Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~ I