34957172.exe has stopped working and was closed. Windows error message

Since the installation of Service Pack 2 for Vista, I receive the following error message that causes my computer to freeze - "34957172.exe has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. "How can I solve this problem

Hi SherriTeille,

(1) what is you receive the exact error message?

(2) when exactly you get the error message?

Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

http://support.Microsoft.com/kb/929833

Method 2:  Put the computer to boot and then check if the problem persists

Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

Continue with the remaining steps to pin-point on the third party service.

After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

Tags: Windows

Similar Questions

  • Microsoft error message "R003. EXE has stopped working and was closed ".

    Anyone know what this means?   Microsoft Windows 'R003. EXE has stopped working and was closed "it doesn't affect my computers operation at all.

    Discussions were merged.

    Deleted duplicate.

    I just found this while trying to get the answer. I gave him a shot and think that it does the trick.

    http://malwaretips.com/blogs/default-tab-search-bar-removal/

  • WinService.exe has stopped working and was closed message.

    I have Windows Vista Home first. My problem is, there is a tap of quick launch next to my Start menu, when I click it I get a message that says "WinService.exe has stopped working and was closed". I don't know exactly what it is or how to solve the problem in order to get the tab out my quick launch.

    Hello

    Did you change your computer?

    Method 1:

    I suggest you to follow the steps and check.

    Run regedit from the line start/search
    Go to these keys:

    EntVersion entVersion\Run
    EntVersion entVersion\RunServices

    Click on each in turn and then look for a string that load on the right.
    Select and simply delete this string in the right pane.

    Method 2:

    Run Selective startup using System Configuration

    http://Windows.Microsoft.com/en-us/Windows-Vista/run-selective-startup-using-system-configuration

    Method 3:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

    There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

    Very grateful for any solution for every problem!

    I am running vista.

    * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

    Hello

    1. don't you make changes to the computer before that happened?

    2. Once you get this error message?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

    http://support.Microsoft.com/kb/929833

    Method 2:

     Also try to set up your computer in a clean boot state, and check if the same issue occurs.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 3:

    Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Hope this information is useful.

  • manages scheduled tasks has stopped working and was closed

    Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed".

    And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed).  Set to automatic update referred to 'unknown error' (8 and 57, I think).

    FYI, sfc/scannow reported no integrity violoations with system files.  I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then.

    How this application problem "manages scheduled tasks" can be fixed?  If you don't know, where can I get an answer?  Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. "

    Craig in New Jersey

    Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor.  I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two.   I'll report after awhile.

    It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption.  For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer.

    Craig in New Jersey

    Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally.

  • Windows Audio device Graph Isolation has stopped working and was closed.

    I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

    the error report is:

    Signature of the problem «»
    Problem event name: APPCRASH
    Application name: AUDIODG. EXE
    Application version: 6.0.6001.18000
    Application timestamp: 47919284
    Fault Module name: AUDIODG. EXE
    Fault Module Version: 6.0.6001.18000
    Timestamp of Module error: 47919284
    Exception code: c0000005
    Exception Offset: c 000070 0
    OS version: 6.0.6001.2.1.0.256.6
    Locale ID: 1033
    Information additional 1:3502
    More information 2: a465924573e02e7dbf28b31e7ea12c28
    Additional information 3: a4b
    Additional information 4: 91409072175cd5a219bdca7388005249

    Additional information about the problem
    Bucket ID: 932674242 "

    This is on a DELL XPS M1710
    I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

    No software installation seemed promt it.

    What are my options?

    deafinhum,
    If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

    Here is an article to help you with the repair process.  Please let us know if you need more assistance.

    http://support.Microsoft.com/kb/936212

    Thank you
    Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Desktop Window Manager has stopped working and was closed

    One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

    I did some research on this and have already taken the following measures without a bit of luck:

    1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

    2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

    3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

    4. the event viewer shows the following:

    Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

    Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

    What should be my next course of action?

    You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

    It's your specific error.

    //
    MessageId: STATUS_BREAKPOINT
    //
    MessageText:
    //
    EXCEPTION {}
    Breakpoint
    A breakpoint has been reached.
    //
    #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

    Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

    So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

    Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

    Clean boot

    Click Start - all programs - Accessories - run and type
     
    msconfig
    
     
    Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

     
    Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

    Tip clean boot

    If the above does not help.

    Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

    Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

    Reset. If this resolves your wake problem half of the items until you find the one that.

    Safe mode

    If the above does not help.

    Click Start - all programs - Accessories - run and type
     
    msconfig
    
     
    Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

  • NService Application has stopped working and was closed to popup on the desktop, when I first boot my computer.

    Original title: NService Application has stopped working and was closed

    Recently, I see this popup on the desktop when I start my computer first – 'NService Application has stopped working and has been closed. "

    What is - this and why I am see?

    Thank you!

    Hi Lee,.

    1. have you made a recent software or hardware changes to the system?

    2. is your system connected to a domain?

    Nservice.exe seems to belong to IBM Lotus Notes / / Domino from IBM.

    Method 1:

    If you use applications such as Lotus, then you can try to uninstall and reinstall to fix the problem.

    Note: Make sure that you have the CD or downloaded installation files to reinstall the program.

    For more information, see the articles:

    Uninstall or change a program

    Install a program

    Method 2:

    Otherwise, you can perform a clean boot and check if that helps.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

  • Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

    I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

    "GPCore COM object has stopped working and was closed".


    This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

    Hello MikeF48,

    Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

    I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

    Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

    Of the Original installation CD:
    1. Insert the CD in the drive and then cancel Setup
    2. open my computer and click right then on the CD from the drive and select open
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup
    8. download and install the latest version of Adobe flash player
    http://get.Adobe.com/flashplayer/
    9 download drivers and full software features
    Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:
    1. type % temp % in the field of race
    2. Locate and open the folder starting with 7z (example: 7zS2356)
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup
    8. download and install the latest version of Adobe flash player
    http://get.Adobe.com/flashplayer/
    9 download drivers and full software features
    Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
    10. run the download to reinstall the printer

    After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

  • Installer of Modules of Windows has stopped working and was closed

    Hello
    I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago.  When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed."  I have already reinstalled Windows Updates and Microsoft Updates, nothing helps.  Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
    Help?
    Thank you!

    Greetings mollypopsicle,

    I see that we have always had problems with this update.  This leaves me with the question about the possibility of fi computer update auto is damaged during download.

    I would like to have you create a folder on your desktop.  Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.

    If you have a download manager, please use it to download the KB958623 update from this Web site

    http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20

    Make sure you use the version of Windows Vista that applies to your system.

    Once the download is complete and before running the update

    1. Restart your system in safe mode with networking, as described in the above post from Brian.
    2. Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
    3. If this does not properly complete, were there a pop-up Windows indicating that an error?  If so, what were these errors?
    4. Maybe it's that the error you receive is that this update does not apply to your system.  If so, this update can be hidden in your list of updates.

    Here is a link on how to hide the update

    http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx#EZH

    Select only the I'm getting offered an update from Windows that I don't want.

    However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition.  Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.

    Thank you and continue to keep us informed of the State of this update.

    Best regards

    Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

  • Windows Update, error: "Windows Modules Installer has stopped working and was closed".

    Whenever I run windows update, and try to install an update for Vista, I get the error message"

    "Windows Modules Installer has stopped working and was closed"

    . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

    Thank you

    Luke

    Hi guys

    I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

    Thank you

    Luke

  • Message "Microsoft (C) Register Server has stopped working and was closed" appears

    When I start up I get the message "Microsoft (C) Register Server has stopped working and was closed".

    Here, an article which offers a solution to this problem that seems easy to implmenent and is worth a visit: .

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • AFN Updater has stopped working and was closed

    Original title:

    AFN Updater

    I get the following:

    AFN Updater has stopped working and was closed

    A problem with the application to stop working properly, Windows will notify you if a solution is available.

    The message stays all the time.  It has something to do with a phone, what can I say, but do not know how to get rid of it.

    Any suggestions?

    C

    Hello

    Search in the two programs and features and uninstall or look for a boot entry.

    "How to use MSCONFIG in Windows Vista"

    http://www.netsquirrel.com/Msconfig/msconfig_vista.html

    You can also use this free program to do, too:

    "Autoruns for Windows V11.32"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    See you soon.

  • A pop up window telling me:-mobile device service has stopped working and was closed

    original title: mobiledeviceservice has stopped working and was closed

    A pop up window telling me: -.

    Microsoft Windows

    MobileDeviceService has stopped working and was closed

    A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

    The only opposition is to close. After closing, it ceases to appear after a few seconds. So, how to solve this problem?

    Hi Nati,

    1. when exactly you receive this error message?

    2. What is the full error message you get?

    3. you remember changes to the computer before the show?

    You can try to perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  • "winrscmde has stopped working and was closed".

    6 months get more messages-popup "winrscmde has stopped working and was closed" - other problems with adobe, launcher hook antispam OE, consumer software customer, internet micro-low utility of seizure and windows host (rundl32) process all have in time has stopped working - I followed most of the suggestions sent to me and no result - spent money on drivers and norton and just tired that - using Windows Vista Edition Home Premium

    Hello

    I suggest you run the Microsoft FIXIT from the link below and if the problem persists
    Troubleshoot Internet Explorer to IE quick, safe and stable
    Hope this information helps.

Maybe you are looking for

  • iTunes "splits" a purchase

    Having recently purchased an iTunes compilation he was "divided" into 2 albums. Is there a way to "Merge" these titles in one of the albums? tracks half a dozen on 1 and the rest of the other and not in any order?

  • update applications in itunes

    I can no longer access my wifi on an iphone 4 and can't find out how to upgrade applications through itunes.  Prior to the update of the OS of Capitan, I was able to find it in the view menu.  All the previous questions on this forum about the update

  • Epson stylus TX600Fw Office

    Dear Sir / Madam I hv bought it more top-printer in one, but I can't install the driver. I have consulted Epson technicle dept, but they told me eas there is no problem with their driver. They sent me to see the technicle window service. Therefore, I

  • HOW to make small enough to burn on a dvd content WSUS folder

    I can't export the WSUS on a DVD content folder.

  • My Officejet Pro L7590 prints with lines across the copies? How to fix?

    Printer has run fine until lately.  Now it has lines across all copies printed.  Computer running Windows XP.  Both are uTD on software...  Tried cleaning with air presurized Copier, but made no difference. I can fix thins, or must it technician?