3520 Deskject HP all-in-one: newly replaced black ink cartridge does not print

Similar Questions

• Black ink cartridge does not print. tried all of the suggested remedies nothing works!

  What is value?

  The problem solved itself suddenly. Black works now! I don't know what he cured I have applied a single repair by turning off it and back on and at the time that doesn't seem to work. It took until a few days later, when I decided to try another printer that I found that it worked. Thanks to all who have tried to solve my problem!

• I have a printer all-in-one HP, model C309A. She does not print black.

  Black in my C309A print no more.  I put new cartridges, but nothing helped.  Prints fine, just the black color will not work.  What should I do?

  When you open the door to replace the ink cartridges, there will be a lock/lever to the right of the cartridges. This lever of lifting, and then you can take the whole basket (the cartridges sit in) out. Clean the bottom of this place of or on the bottom in water and lint basket. The basket is the print head.

• HP Photosmart Premium Fax all-in-One Printer-C309a-new black ink cartridge will not print

  I just installed a new black cartridge (made by HP) what print quality became poor in the middle of a job.  He completed the job just fine, but when I tried to print later, the parts of the document that are in color/black and white will be printed.  Black is simply absent from the document.  the level of supply shows as thin and all the diagnostics indicate that there is no probem.  I have not received the error messages.  I tried to turn the printer power switch.  I tried to clean the print heads.  I tried to uninstall & reinstall the cartridge.  I do not have the black cartridges extra to try to see if that does not solve the problem, but as stated above, it worked at first.  I have just printed on ordinary regular white printer paper.  I tried all the relevant measures in the troubleshooting document of poor mailed print quality HP elsewhere on this page.  nothing worked!  another post mentioned someone resetting the printer, but did not say how it was done.  any ideas on a solution? Thank you!

  To reset the printer, follow these steps:

  While the unit is turned on, remove the power cord at the back of the printer. Wait at least 30 seconds, then plug the power cord to the back of the printer, then turn on the device. That will complement a power reset.

  Now, lack of black printing can be the result of a number of things. If it's only missing say when printing from Word, then print settings in Word are set to grayscale only (or something similar) which would exclude the black cartridge. If all programs, so it's either the main print in grayscale settings only the value or the cartridge/print head is blocked to the top/Sales. If this isn't the print settings, then create a report of print quality and follow the steps described in this document:

  http://support.HP.com/us-en/document/c01624986

• HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.

  The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.

• Black cartridge does not print 6500 wireless all-in-one printer

  He can't get a black cartridge to print even after cleaning the print heads on my of 6500 all-in-one wireless printer.  I tried cleaning the heads of print and sensors twice no longer useful, but can print color.

  jweatherly, unfortunately, it seems that your printhead may be dried or damaged. I would recommend that you replace it if a local retailer or through HP directly.

  However, the print heads can be an expensive part of the printer to replace. On this thread (http://h30434.www3.hp.com/t5/Other-Printing-Questions/HP-6500-Office-jet-E709a-Black-printer-cartridge-HP-920-not/m-p/447545#M28623) Bob describes some steps to clean the printhead in a more direct way. It might be useful to follow the steps, he did and see if it improves your print quality, since he worked for others.

  Let me know if it helps!

• Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

  After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?

  Hi @HWEB

  What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.

  While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• All-in-one HP Deskjet 2060 K110 series does not scan

  The power button of my K110 series all-in-one HP Deskjet 2060 is always enabled. Also, a doen't work scan. What should I do? Thank you!

  Hello

  You can try uninstaling your printer and then reinsert.

  Use this HP link > put in your operating system > follow through the following Web page > he'll be correct that information it tell you how to make and also how to get the right Drivers to install.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4157336&LC=en&cc=us&DLC=en&lang=en&cc=us

  If you can't fix it according to the information here, contact HP support.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.

• I can't find my lexmark x 6100 all-in one series on my comptuor, it does not indicate the default value

  I CAN'T FIND MY PRINTER ALL - IN - ONE - PRINTER SERIES.  It is SAID IT is THERE, BUT SAYS NOT SET AS DEFAULT. What does that mean?

  Hello

  -What is the exact error message you see when you try to print?
  -This work was fine before? If so, what are the changes in software/hardware on the computer?
  -What version of windows you have?

  If she says that a printer is not set by default, this means that there is no recognized printer or the printer that is there is not yet defined as a default value. Here are some steps that might be tempted to solve these problems.

  Method 1: Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  This see below mentioned articles that may help you in the matter of fixing.

  Method 2: Solve printer problems.
  You can use the link as a reference which may help you fixing the issue below.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  First of all, try to uninstall the printer drivers, then unplug the USB cable from the printer and then try to install drivers from the Brother Solutions and plugin site then the cable and then try to print.

  Method 3: Download the drivers from the Lexmark Web site
  You can also try to download the latest drivers for the printer from the lexmark support Web page and install.
  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  I hope this information helps!

• I have a hp photosmart c6180 all in one. for these last days, it does not switch. ins

  I have a HP Photosmart C6180 All in one.  For these last days, it does not switch. When I insert colored part of the cable into the printer then led on the cable is cut, that's why the printer does not illuminate.  Please let me know what could be the problem.  I thought that the cable may be defective, so I bought a new cable, but the printer does not work.

  Hi rajeshgaur,

  You can call our support lines to check if the printer can be repaired and how much he would run to fix the unit. The other option you have is to contact support and check in the trade trade program.

• HP 1510 all in one, Win 7-32 bit Toolbox does not work

  Help forum

  All-in-one HP 1510 said that PC is disconnected, as has happened in June and with your help has been resolved. I'm under Win 7-32 bit. Since then, I've added Chrome as a second browser. I can send doc to print from PC without problems. I can't access the other solution Center scan doesn't work no impression or Toolbox. That's what I was looking for because I need to clean a cartridge... I wish I had saved all previous emails

  Thank you, Connie.

  I have since uninstalled and reinstalled the HP software and downloaded the patch to upgrade to Windows 7. Instalation has completed successfully. "Solution Center indicates then the printer is ready, but the Toolbox won't work or won't be printing Solution Universite.le error message if there is" no printer or two-way communication is disconnected "I ran doctor HP and which indicates that everything is operational. I could also print a test page for HP doctor.

  Thanks for your help,

  Connie

  Thanks for all your help Travis, I'll probably go with the 4620.
  Connie

• New black cartridge does not print - Photosmart 5510 all-in-One

  I replaced all my ink cartridges when they ran.  The black cartridge is printing not and cannot even print alignment test page to align my new cartridges.  They are HP cartridges I bought and now after all cleaning procedures, I have now exhausted all new cartridges.  My warranty is exceeded, even if I have not received the new printer last Christmas, but my family he registered in August when they bought it for me.  I'm going to buy new cartridges, but I fear that I will lose more money that this problem will not be solved.  Someone help.  I have uninstalled, reinstalled, cleaned print heads, tried to align the cartridges but error message appears then all new Board would be good.  Thank you

  Hello Cath,

  I'm really sorry to hear about your Photosmart 5510 aligning properly and not printing in black ink. I understand that you have tried to align the printer and it has not solved the problem. I want to help you and make you my best to do it!

  At this point, I do not pretend to try new cartridges (especially black) and trying to do the alignment again. I found a useful troubleshooting guide following which solves the problem, I hope.

  Here's the guide I recommend following step by step:

  A "alignment failed" Error Message appears on the printer

  * Tip - make sure that the printer is connected directly to the wall outlet.

  Please do not hesitate to post your results here and I will help you further if necessary.

  Take care

• OfficeJet HP 5510 all-in-One - door locked - ink cartridge does not open.

  Windows XP Service Pak 3, HP 5510 Officejet, printer, USB connection.

  Won't let me open the ink cartridge door.  So, I can not install new ink cartridges.   It started about 3 weeks after I deleted some other software.   When I touch the door to open it, I get this flashing Error Message - "Door open, door close print cartridge."   (but door is not open, it is locked closed).   .   Printer will print documents correct, my problem is that I can't load new ink cartridges.  I could probably force and break on it to open it, but am afraid my printer does not work after that.  I love it and want to continue using it.

  Three times, on different occasions, I crossed the steps on your website to reset the printer.  They did not solve it.  I opened the back of the printer and looked for any paper jams and tips or debri.   I took can air and exploded all over where I could, but nothing came out.  I don't have a paper jam, when this started.

  Is there a code pin or something to get out, the door somewhere?

  If I force rotating door and breaks, the printer works?

  Problem started on December 14, 2010.

  Thank you

  Hello Oldlady10,

  The 5510 JO has a Center door that goes through the top on both sides. It is possible that the door warped a bit in the middle and create a barrier that will not the door opens without a lot of strength.

  Solution: Hold the door with both hands as you open the door, then take both thumbs and press down on the top of the door to repel the distorted area and then lift the pen access door.

• I replaced the ink cartridges, but the printer still shows empty black cartridge. How can I reset?

  I have a HP Deskjet 3050 a - J611j all-in-one printer.  I use Mac OS 10.7 Lion.   I replaced the empty ink cartridges.  Now it shows the color cartridge is full, but still shows black cartridge empty.  Is it possible to reset it?

  Hi Shanmarie1103,

  If the cartridges are rebuilt you will not get a read out on the ink levels. You will need to use a new OEM cartridge with a new chip for the ink levels. Click on the links below for more information.

  The truth about remanufactured ink and toner cartridges

  Price of ink

  

• Replace the ink cartridges and not shown on the new copy of the outs ink

  I have a HP 8500 printer a9110. I just replaced all ink cartridges 3 colours (black cartridge is always good). After replacing, I tried to print and all that comes out are white print out without color or very light tone. I tried to go to tools clean and align the heads. Cleaning worked but received failure on align option. I turned off and unplugged the unit kidnapped and released new ink cartridges. Also, I removed the two heads and cleaned with a soft cloth. Everyone knows this problem before. Any help is appreciated.

  I don't think that should have used a lot of ink.

  Although it shows that 60%, I think you should be able to print as well.

  Sorry I don't really have much information on it, but I'm glad you were able to solve your problem!