3524 office: Change name for the scans

Somewhere in the past I changed name genric for scans of scan000X to a name, I prefer not to use it anymore. But I probably did before moving to Windows 10, because I knew where he change in Windows 7 (and earlier versions). How can I change the generic name for the (still) scans in Windows 10?

Hello

Thank you for using the HP forum.

1. Firstly, you must ensure that you have your software FULL of features installed.

http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3520-e-all-in-one-printer-series/5162504/model/5241256#Z7_3054ICK0K8UDA0AQC11TA930O2

2. open the HP printer Assistant

3. go to scan a Document

4. go into 'advanced settings '.

6. go to 'File' (or Destination)

There should be an option to change the generic name.

Hope that helps!

Tags: HP Printers

Similar Questions

  • Deployment of ADFLibrary: provide a unique name for the resources in this project

    JDeveloper 12 c.

    I'm deploying an application as a library ADF - it will be used my multiple applications.  So it's a bit generic. Sometimes it is OK and other times it gets stuck... See the ChangeLog

    What do mean exactly by ' resourceprovide a unique name of the indicated "? 

    What should I name the files?  xyz_abc_appNotices.jsff or the directory structure has to change?

    Thank you!

    Stuart

    [16: 38:44]-deployment began.  ----

    [16: 38:44] the target platform is Java EE Standard.

    [16: 38:44] analysis of the dependence running...

    [16: 38:44] building...

    [16: 38:48] deployment of profile...

    [16: 38:49] WARNING: the commonly named resources below could cause errors of reusability to your consumers.

    Provide a unique name for the resources in this project, or start with a different project.

    appNotices.jsff

    appNoticesMain.jsf

    [16: 38:49] Mobile WEB-INF/adfc - config.xml for META-INF/adfc-config. XML

    Well, Yes, it would do. The warning say you that your library resources should use unique names, that I hope are not used by other libraries. From the resources app Strip is common chance is that it will be a duplicate.

    Timo

  • How gemfire locator can be configured to return the full DNS name for the customer?

    We have an index running before 2 cache servers,

    Locator.DomainA == > Server1.DomainA, Server2.DomainA.

    the problem is when the customer (customer. DomainB) try to access gemfire via locator, it up ' get: not connected to GemFire' exception, the reason is that the Client.DomainB uses the full name "Locator.DomainA" to access the gemfire, the Locator maintains only the servers host name, when the client runs the query, it access Server1 or Server2, but in this case, the networking is not connected.

    How gemfire locator can be configured to return the full DNS name for the customer?

    in gemfire.properties, Locator attribute is full domain name already.

    Thank you

    Yao

    There is a parameter for hostname for the customers that you can put in your cache.xml file cache-server element. It is a string that is passed the server for the location, and then on the Locator for the customer. You must set this client-to-host name in each of your cache servers.

  • Sizes of Splash screen and names for the iPhone 6 and 6 more in the file descriptor xml files

    Is anyone know the sizes of screen and the file names for the iPhone 6 and 6 more (for the descriptor xml file)? Or current splash screens works on both devices?

    i.e. Default-Portrait.png *-768w x 1024 h

    Hello

    Here is the specification.

    iPhone 6

    Start screen

    750 x 1334

    72

    [email protected]

    Resources or resources/iphone

    iPhone 6 more landscape

    Start screen

    2208 x 1242

    72

    [email protected]

    Resources or resources/iphone

    iPhone 6 Plus portrait

    Start screen

    1242 x 2208

    72

    [email protected]

    Resources or resources/iphone

    You can find more info here - http://docs.appcelerator.com/titanium/3.0/#! / guide/Icons_and_Splash_Screens-section-290048 97_IconsandSplashScreens-Splashscreens

  • Provide a name for the new single-instance - distributed environment

    Hello

    I'm not sure about that piece of information in the installation documentation

    Please see

    http://download.Oracle.com/docs/CD/E17236_01/EPM.1112/epm_install_11121/frameset.htm?launch.html
    During Setup in a distributed environment, provide a name for the new single instance that you configure each server. For example, if you use the epmsystem1 of name of default instance on the first server, and you keep the same names on the Server naming convention, you must create new, instance names unique on each subsequent server, like epmsystem2, epmsystem3, and > so now.
    What happens if I use the same path "d:\...\epmsystem1" on all servers in a distributed environment?


    Concerning
    Kumar

    Published by: Kumar 1 October 4, 2011 06:18

    It was originally a 11.1.2 install and then upgraded to 11.1.2.1 with 11.1.2 I think that the names of instances were the same in a distributed environment.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Office jet Pro 8600: how to change the folder for the scans on my Apple?

    Hi, I want to know how to change the destination for my scans folder when I scan from the printer.  Currently, the scans go to "documents", and I want him to be in a business case.  Clues?  I tried to watch some instructions on the previous posts, but it seems that they are for windows.

    Thanks for the help!

    Hi @jgossc,

    I'd be happy to help you change your scan destination. I understand that when you scan your Officejet Pro 8600 to your Mac, the file analysis is currently underway to your documents and want to let them instead to a business case.

    To change the destination please follow the steps below and let me know the results of your efforts:

    • Open HP utility
    • Select Scan to the computer
    • Click Scan tasks to change
    • Choose a shortcut to scan
    • Select Edition
    • In the options listed here, you should see scan destination

    If this resolves the issue, please click Accept as Solution button below; If not, let me know and I will do everything I can to help. Thank you.

  • 5740 HP e-all-in-one printer: how to change the destination for the scans folder

    I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

    Two questions, both assuming I want to use the HP software to scan:

    1. is there a way to set a default value of PC to the computer target for digital images?

    2. How can I change the folder to which scaned images are sent?

    What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

    Any help would be appreciated.

    Roy

    Hi Roy,

    Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

    I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

    HP extended Scan

    FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

    You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).

  • ENVY 5530 - how to change the destination for the scans folder?

    I want to change where scan images end, and it is unclear how to do this in the manual or through available menus.

    Hey there @ratdude ,

    Welcome to the HP forums

    I understand that you want to change the destination of your saved scans, and I would like to help. In order for me to find the right measures to guide you, I would need to know which operating system you are scanning on (on your computer).

    Please let me know and I'll get back to you:

    Operating system Windows am I running?
    Mac OS X: how to find which Mac OS X Version is on my computer?

    I can tell you that the option is in the scanning software HP. If you run Windows, try looking under the options 'Advance' for the Destination of scanning.

    Have a great weekend

  • Change of name for the system folder

    I want to change the name of the folder owners precedent (in Documents and Settings), 'Bill', 'Sarah' (this computer was given to my daughter).  I get a message, "Bill is a Windows system folder...". It cannot be moved or renamed. ' Really?  Is it not there not simply changed the name of this folder?

    Instead of changing the name of the file:

    1. Create a new user account named "Sarah".
    2. Copy (s) desired documents, photos, music and other files from the account of the Bill of Sarah.
    3. Remove the account from the Bill.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Domain name for the IP and EBS r12 changed the configuration

    Dear all


    I have oracle ebs r12 installed on the development server on 64-bit linux OEL, I changed my domain name and IP address of this server. Please help me how to change this configuration to the instance of the EBS. When I run adstrtal.sh apps/apps his mistake to see the

    opmn id = hostname.domain.com:6200
    No matched process or applications.

    domain name shown above is old it is changed. name of domain and IP is changed no host name.

    Please advice how to retrieve.

    Abdelouahed

    Did you complete the steps described in these documents?

    Note: 338003.1 - how to change the host name or port of the database layer using automatic configuration
    Note: 341322.1 - how to change the hostname of a stream of Applications using automatic configuration

    Additionally, make sure that you clean the FND_NODES table according to the (how clean non-existent nodes or addresses IP of FND_NODES [260887.1 ID]).

    Thank you
    Hussein

  • Module NI 9214 and cRIO, where is the example for the scan Mode

    Hello

    I'm new to programming of cRIO. I'll use a cRIO 9022 with different modules, such as 9214, Labview 2010.

    However, when I go to the examples, I can't load the get started scan for 9214 module Mode, it says that I have to reinstall. I don't know what examples are not installed, as I reinstalled my software already once and I could not find any change. Anyong can tell me where I can find this example, so I'll try to find more easily the example and install it.

    Thank you very much

    See you soon,.

    Antonio

    Hi Antonio,.

    I recorded the example mentioned to be compatible with 10.0 using the function 'Save for the previous version' of LabVIEW and attached the new document below. Please let me know if it works.

    The course will be very useful if you want to use it much in the future. Real time quotes are most relevant to develop on CompactRIO and the FPGA course will be very useful if you plan to use the FPGA in your applications. Do you have a course of training before sitting?

    Thank you

  • OfficeJet 8500 Prime will not connect to wireless for the scanning of email

    HP Officejet 8500 first.

    Western Digital N900 router

    Printer is connected to my home wireless network and wireless to my HP Pavilion laptop (which is in the same room).

    I felt for a few years and I do a LOT of scans to myself on my e-mail and rarely have problems.

    About a month ago, I got a new wireless router, and the problems started.

    I had the wireless configuration.  Printer connect to my home wireless.

    If I try to scan to e-mail, I get a message "unable to connect to the server. Check the address and the name of the server.

    I can print from my laptop very well (wireless)

    I have run the wireless network test report (which incidentially, does NOT use the default tray as specified in default values, so I have to remove the media in a status bar and replace them with paper to make turn this test).

    All passes.

    very good signal strength.

    no other network with the same ssid

    Wireless networkes detected: 3

    Channel 11

    everything looks great.

    I connect to my router (from my wireless laptop).

    My router says that the printer is on the network.

    I turned off/power on router to reset.

    I tried the reset network default printer and returning via the wireless Assistant.

    I tried another wireless (5g below)

    I got the preferred wireless network name and password several times.

    I turned the printer deactivation / activation.

    The SSID signal is using 2.4 Ghz (802.11 B + g + n) 20 / 40 mhz channel (auto) AND I ALSO tried with channel (11) just

    The router includes a 5 GHz (802.11 a + n), but the printer never sees this SSID, and tried manually enter the name and password as well.

    I get the same error every time.

    Sounds like you arehaving problems with scanning to email. Can you tell me first if you have tried all the other email accounts other than the one you are using. According to the security on the SMTP servers for the customer, you will have to go and try another account. I suggest to make a Gmail account and attempt to put in place the new feature.

    I would like to know how this happens, and I'll get back right with you!

    -Spencer

    PS I hope you had a great weekend and had a wonderful day!

  • Color LaserJet MFP M476nw: Could not resolve SMTP for the scanning functionality of e-mail

    Help, please!

    I tried for days to get the scan to E-mail feautre to work and continue to get an error "Cannot resolve the SMTP server". I tried to use both @gmail.com and addresses @hotmail.com as a result of indications on each single post, that I could find related to this topic on the forums of HP, making sure to try every possible combination of SMTP/SSL/Port according to the parameters indicated by each email provider (including this special setting "app not secure", that I need to activate it for Gmail) and NOTHING.

    I use the web server HPs to set up the configuration.

    I'm desperate and start a new post on the forums is my last resource before you put this printer to sleep.

    Thanks in advance for the help!

    Hello @jerefle

    Try to do the following

    Upgrade the operating system on the printer (Firmware)

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6457978&lang=en&cc=us#Z7_3054ICK0K8UDA0AQC11TA930O2

    Select the operating system and to choose the option fimware run the application and send the upgrade

    Go to the printer and go the following changes after the upgrade

    Implement > network > network services > IPV6 > Off

    Implement > network > link speed > complete 100TX

    Now of course at this stage you want to try to use the function

    His chest that we review a few moments so the way tea set up was made, I thin

    (The following information as its dummy data has just develop my point)

    For gmail, you can test with port 465, as well

    For hotmail that you want to use smtp.live.com port 25 or 465

    After this quick settings review if it does not then you want to do this

    On this Web page with the ip address that you're on go to network > identification identification network, save your primary and secondary DNS information, and then change to primary to 8.8.8.8 and 8.8.4.4 secondary and test again

  • How to delete list of name for the computer images tags

    How can I remove the list of the names of tags for the photos to the computer. Cannot remove the

    It is possible that the change of name the Windows Photo Gallery
    database file could accomplish the task.

    (depending on your version of Windows Photo Gallery
    the database could be Pictures.pd4 or pd5 pd6.)

    C:\Users\[username]\AppData\Local\Microsoft\
    Windows Photo Gallery\Pictures.pd4 or pd5 pd6

    The database is a file... you will need to
    Change the following setting:

    Reach... Control Panel / folder Options / View tab.
    ... To check "Show the hidden files and folders" / apply / OK.

    The file ends with a advanced
    Search for pd4 pd5 and pd6.

    Reach... Start / Search / Advanced search.

    Check the box... "include not indexed, hidden and"
    system files' Enter pd4 pd5 or pd6 in the name field

    Try to rename the file .pd4, pd5 or pd6 to Pictures.OLD

    The next time that the Gallery is launched, it will create
    a new database file and the gallery will appear as
    He did the first time you have ever opened.

    The gallery must fill in again and some tags
    and metadata can be lost.

    If you are not satisfied with the results... you can delete
    the new database file. If you rename the original back
    Pictures.pd4, pd5 pd6 your gallery should be like
    It was before the change.

    Good luck...

  • 3520 connected usb printing but do not recognize the computer for the scans

    DeskJet 3520 used to scan to the computer.  The name of the computer used to happen on the screen of the printer when a scan of the computer asked.  It does not now.  I can't scan from the computer either.

    I am still able to print.

    I deleted all the programs associated with the printer and reinstalled everything from the Web site. Twice.

    Still, this has not fixed the problem.  I'm not very computer savy, but I'm sure that I did not interfere with the settings of the printer.

    Help

    Hey.

    Happy to know that you were able to copy. This means that imaging equipment is not broken because the scan and copy times function use the same bulbs and layered imagery. So now, we can have on the appearance of the software.

    Allows to use printing HP and doctor Scan for that matter today. It is a software developed by HP for printing and scanning with Windows software problem. You want to run the part "scan fix" the software for this problem.

    Click here to download and run the print and Scan Doctor > www.hp.com/go/tools

    If please go through this and let me know how the doctor works for you. Have a great day and looking forward to hear back on your part.

Maybe you are looking for

  • Sierra slow mail

    Hi guys,. My current computer: MacBook Pro (retina, mid-2012) Processor: 2.7 GHz Intel Core i7 Memory: 16 GB 1600 MHz DDR3 Graphics card: NVIDIA GeForce GT 1024Mo of 650M; Intel HD Graphics 4000 1536 MB My question: I've updated to Sierra yesterday a

  • 7520 pictures to print (4 x 6) with a wide border on the left side

    I am trying to print 4 x 6 photos and they all come with a wide border on the left side of the photo.  I tried also to airprint from my iphone and the same thing happens.  Any suggestions?  I just got the printer 2 days ago. PS. I made sure the setti

  • My Satellite C855 makes a noise very loud

    Hello Today I was playing my games, as usual until my laptop from the sounds of buzzing very, very strong. Instantly, I turned off the laptop. Would be a bit and turned back to the left. Once again, very loud noises. I'm afraid to turn it back on now

  • Connect the iMac G5, 2005 on TV via USB to use the TV as a monitor

    The desire to use a new TV as a monitor for an iMac 2005 G - 5. Using the usb connection. The TV is not connected! (The computer lacks HDMI port; it has a firewire port, but I can't find a firewire-HDMI connector, so use the usb ports. Suggestions? T

  • Thickness of Lenovo IdeaPad Z500 HDD; Replacement of SSD

    Hey guys,. I own a Z500 IdeaPad with a ST500LM012 HN-M500MBB 500 GB HDD by Samsung. I would like to do an upgrade with a 1 TB of HDD, I would put in the HARD Drive Caddy (replacement CD/DVD drive). And I also intend to get an EVO 840 Samsung SSD, I p