360 Wired Controller not working not not after having been unplugged

I used to run my 360 controller via usb ports on the side of my keyboard and it worked very well. Friend has unplugged the controller and when I tried to reconnect, nothing worked. Been deleted and reinstalled drivers several times, the computer reads the controller and it turns on, but none of the buttons to enter anything. Device Manager sees nothing wrong and everything works fine. No idea where to go from here.

Hello

1. is specific to a particular USB device question?
2. modifications to the software you did on the computer before the show?

Method 1
I suggest you to run the hardware and devices troubleshooter.

Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/

Method 2
I suggest you to see the following link for the USB flash drive to the Xbox 360 support.

Support for the Xbox 360 USB flash drive
http://support.Xbox.com/en-us/Xbox-360/accessories/USB-flash-drive#0a888f1bff794b3da8737f0331a8f4d5

Additional information:
How to connect your Xbox 360 wired controller to a computer running Windows
http://support.Microsoft.com/kb/906347

Tags: Windows

Similar Questions

  • XBOX 360 wired controller not working not with my Xbox but works on another Xbox

    Problems with my xbox wired controller.  When I plug it into a usb port it flashes once quickly and turns off.  I tried to use it with other boxes of xbox 360 and it works very well.  I did all the troubleshooting steps and the wireless remote we have works very well.  We sent the box to Microsoft 2 times already because of the same issue.  both times he worked for a short period, then stopped working both times.  I don't want to send it back again so please Help!

    Hi Brian,.

    If the controller is working on other computers, then it's a problem with the USB port to which you connect the Xbox to.

    Well want to try plugging it into a different port and check.

    Try the steps from the link

  • Xbox 360 wired controller not recognized by my PC.

    I'm having a problem with my Wired xbox 360 controller (it's a fightpad street fighter 4 if it makes a difference). Since I upgraded from windows vista to windows 7 the controller worked normally, but after I did a Microsoft Update, its not to recognize the controller, and it gives me an error code 43. I tried to download accessory software for the controller, but it is not helping the problem at all, AFAIK. Any comments would be much appreciated thanks.

    Hi Persianguy,

    Welcome to the Windows Vista answers Forum!

    Error code 43 occurs if the drivers controlling unit notified the operating system that the device has failed in some way. You will need to update the drivers for the device.

    Step 1

    Use Windows Update to find a device driver

    Note To use Windows Update, you must be connected to the computer as an administrator. To verify that you are connected to Windows with a user account is an administrator on the computer; Visit the Microsoft Web site at the following address:

    http://support.Microsoft.com/GP/Admin (http://support.microsoft.com/gp/admin)

    Follow these steps to use Windows Update to find a device driver:

    1. click on start toreduce this includes this ima, click all programsand then click Windows Update. Reduce this includes this imaIf that you are prompted for an administrator password or a confirmation, type the password or click continue.

    2. click on check for updates.

    3. to determine if updated drivers are available, click view available updates.
    If updates are available, click the driver you want to install and then click install. The collapse of this that i top

    If you are prompted for an administrator password or a confirmation, type the password, or click continue.

    If Windows Update is unable to locate the required device driver, contact the device manufacturer to download the latest Windows Vista device driver.

    Step 2

    Uninstall and reinstall the device drivers

    If no exclamation point appears next to the name of the device and the device is not working properly, uninstall and reinstall the drivers manually. To do this, follow these steps:

    1. click StartCollapse this includes this ima, type device manager in the start search box and press ENTER.

    2. click on continue. The Device Manager dialog box appears.

    Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click on continue.

    3. in the list of device types, click the type of device and look for the specific device that is not working.

    4. right click on the device and then click Properties.

    5. click on the driver tab.

    6. click on uninstall.

    7. click on OK.

    8. in the Device Manager dialog box, click the Action menu and click Scan for hardware changes.

    o you may receive a message indicating that Windows needs to install driver software for your unknown device. If you receive this message, click search for and install driver software (recommended).

    o you can also receive a message that States that a hardware device is being installed and that the device not installed is present in Device Manager.

    Note: If you do not receive a message or the hardware device is not installed, go to step 3, "Use Windows Update to find a device driver."

    For more information, visit the below given link:

    A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista

    http://support.Microsoft.com/kb/948187

    Article, it is applied after the installation of the Service Pack, but it applies to your question as well. Who should take care of your issue.

    After completing all of these steps, check to see if you still get the same problem.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Xbox 360 wired controller not recognized not no more usb

    My wired Xbox 360 controller used to operate very fine and dandy when I used to connect it to the usb port. It would recognize that the controller was plugged. All of a sudden he stopped to recognize my controller even when I plug in the usb port, the LED flashes once, but it does not even recognize that a controller is plugged. It doesn, t even make his acknowledgement that the controller got plugged. But the usb port recognizes the other thing I plug into it.

    Hi SammyLopez,

    Welcome to Microsoft communities. The problem description, I understand that you are not able to access controller Xbox360. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message? If Yes, what is the full error message?

    ·         The question is limited to this device?

    Follow these methods.

    Method 1: Try to use the USB device to a different USB port and verify.

    Method 2: Try to use the USB device on another computer.

    Method 3: Follow the steps in the article.

    Advanced troubleshooting tips for General USB for Windows XP problems

    Let us know if you need more assistance.

    Thank you.

  • HP DV9291ea paved, works does not after having been in repair

    I have a HP DV 9291ea laptop. It is a model of 17 inches with a keypad on it. The problem is, when the NumLock key is turned on allows the keyboard number pad of the EEG. I recently had the motherboard changed by HP/Tarsus. I suspect that they do not have load the correct keyboard profile. (Tarsus) they said that should bring the laptop and he will fix it (free). I'll do it if no one can help me out here, is there a simple solution and permanent to this problem?

    I can get temnporarly around him as follows:

    • making sure that the NUMLOCK is off.
    • opening keyboard on screen (start > programs > Accessories > accessibility > on screen keyboard)
    • a keyboard layout will appears on the screen
    • I hold down FN button on the real keyboard and clicking the nlk on the on-screen keyboard button with my mouse.
    • the problem is I have is to support on the numlock key once again I'll have to go through the whole process again.

    Anyone have an idea what could cause this or how to solve this problem permanently?

    If you have a suggestion, please report it to me...

    This thread has been dead for a few years, but since I had to really search to find the answer to this question, I thought I'd share what has worked for me.

    In Win7, go to start-> Accessories-> accessibility-> Ease of Access Center, click on "Make the mouse easier to use" and uncheck "Turn on mouse keys".

    It fixed my problem on a HP G72 with numeric keypad integrated.

  • Photosmart HP 6520 - printing black ink does not after having been replaced

    I replaced all 4 cartridges in my printer and tried to print a form, but the black ink is not printing. Thinking perhaps that I bought a defective cartridge, I bought another but I'll always have the same problem. It's the first time that I had to replace my cartridges (remained originals in French - printer was purchased in December). I've never had problems before printing. Please help... desperately need my printer to work!

    Hi barbil,.

    This printer print head is not removable.

  • Satellite L870-165 does not work after having been repaired by their service

    Warranty Toshiba Laptop does not work after having been repaired by their service twice.
    Model: Satellite L870-165

    Computer does not start, rest with black screen showing: No bootable device - please restart your system

    After restarting the same thing happening again.
    I called incident phone Toshiba and after trying several options, I said take it for repair service.
    Told me first of all it was the hard drive, then called me to indicate this resettlement and ultimately it was the motherboard, what would have changed. The next day, being chosen computer repair returned to give exactly the same mistake, due to a malfunction only one night.

    After another call to 902 Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I arrived home the computer does not start only once, again gives the same error.

    I think this team comes with a default factory that his solution is not easy, because even the technical service told me I didn't know what to do with it.

    Sorry to hear all this. Unfortunately, we can not help you much so try please clarify this service. They help you with your laptop even if all must be exchanged.
    > Warranty Toshiba does not work after having been repaired by their service
    To be honest I don t understand this sentence. How old is your laptop? warranty is already expired?

  • Windows compatible xbox 360 wired controller

    Purchased windows compatible xbox 360 wired controller this seller assured me would work under Vista. But apparently not.
    I downloaded the latest driver suitable for the material and installed according to the instructions (with controller unplugged) but still no joy.  I have Vista Home Premium.  The controller is recognized and responds in the calibration utility, but doesn't seem to work for the games. Is it compatible for Vista and Modern Warefare 2?  Are only some supported games? If I lost my time & or silver?

    Only some games support a controller.  Most of the games, including pulling just support a mouse - frankly because it's much better to use a tiny stick.

    If his work all in calibration tools then the controller is working properly, unless the cod has an option somewhere to allow a controller then it probably does not support one.  His place to decide what methods of control that they want to support the game developers. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • Xbox 360 wired controller cannot find drivers

    I recently built a new computer that runs on windows 7 and want to use my xbox 360 wired controller to play a game on it. But every time I plug my controller that my computer is unable to find its drivers. I tried troubleshooting, plug the controller into different ports and update the drivers manually, but none of it works. I was able to use my controller on my old computer but am confused as to why I can't use it on this one.

    Hello

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    With the help of the joystick Xbox 360 for Windows
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

    Set up your Xbox 360 for Windows controller
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

    Troubleshoot your Xbox 360 for Windows controller
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

    For most of the problems of Xbox:

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    Opening hours: 600 PM 2200 h / Pacific / daily

    International (direct line in the U.S.): 425-635-7180

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Cannot install drivers for xbox 360 wired controller.

    Original title: How can I install my controller wired correctly?

    I'm trying to install the drivers for my xbox 360 wired controller, that I bought from Gamestop on my Toshiba Qosmio x-870 running windows 7 64 bit. When I plug the controller into the usb port, the drivers are automatically downloaded, but for some reason any cannot be installed. I tried the driver downloaded from the Microsoft Web site software. I also tried to uninstall the controller and try again. Any advice?

    Try the controller on another computer and see if it works, or take the controller back and exchange it for another.

    I have one on my computer and installed Windows 7 drivers automatically when I plugged the controller works fine.

  • Xbox 360 wired controller for PC

    Hello

    4 months ago, I bought an Xbox 360 wired controller for PC, I use it since a few games, but especially of the Fifa and recently, when I connect to 15 of Fifa, it detects 2 controllers instead of one and the controls were reversed as, as 2 controllers 1 controller-controlled and I can't fix it ,

    I already reinstalled the drivers, put it in the other USB Ports and I started to wonder if it's because of my windows, perhaps as an error that detects how, I would be very grateful if anyone knows a solution for this problem

    Thank you

    Hello

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    With the help of the joystick Xbox 360 for Windows
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

    Set up your Xbox 360 for Windows controller
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

    Troubleshoot your Xbox 360 for Windows controller
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

    For most of the problems of Xbox:

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    Opening hours: 600 PM 2200 h / Pacific / daily

    International (direct line in the U.S.): 425-635-7180

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    Xbox - Feedback
    http://Xbox.uservoice.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Canon 5 d MK IV LiveView stops immediately after having been pressed with Tamron SP 70-200mm F/2.8

    My Canon 5 d MK IV Live View will stop immediately after having been pressed with a Tamron SP 70-200 F/2.8 Di lenses.

    I don't see the problem happens with my lens F / 2.8 Canon 24-70mm.

    This problem happened in video mode.

    I hope that there is a setting I have to toggle to make this objective work in Live View mode?

    Thank you

    Mark

    I spoke to my local camera shop, they said, that it should be referred to the Tamron for the update of the firmware, they said, that Tamron has a fairly good hand around time of approximately 5 days. I've probably will send mine once I'm done with a shoot.

    The lens works very well for me, normally, the only problem for me is Live View. If this is not the case, use the LIve View, it seems to work great so it's not paralyze me right now, but it would be nice to just get it fixed if Live View will work.

    The camera is also on Firmware V1.01 so their will be updates firmware for it also and as a previous post said that Canon will also address the issues with 3rd party lenses. Great! After that all the Canon doesn't want people who have glasses of third parties avoiding the body of the camera for this problem. It's logical Canon would solve this problem.

    So far it is a minor bump with third party lenses. I've always been able to work with my Tamron and Sigma lenses. Just a couple of workarounds until the firmware is updated. It isn't a deal breaker for me. This camera is a pleasure to shoot with and I am very pleased with the Canon has advanced in the development, image quality with the dynamic range and low light performance. I am happy and have no regrets.

    I would still recommend this camera to a friend.

  • Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

    Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

    Original title: need for disk space

    Here are the official specifications of Toshiba for your PC...

    http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

    All interface PATA (IDE) connectors are a standard 40 pin.

    I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

    Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

    In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

    My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

    I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

    Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

    Tricky

  • Why is my xbox 360 wired controller can not be detected in Windows 7?

    My wired controller xbox 360 is not specified and is not detected in the Device Manager section. Tried troubleshooting, but it says that I have does not have a driver for the controller, although I did installed and downloaded from (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows). I downloaded the software and the driver depending on the operating system of my laptop. In addition, there is a system message and Security / Action Center, saying that "your xbox 360 accessories has been blocked from running because it can prevent your computer from starting correctly in the future".

    Please help as soon as possible.

    Fixed it :)

    This is what I did: -.
     
    1) click on your Windows icon in the lower left corner, and then right click on computer
    2) go to properties
    3) click on Device Manager
    4) double-click the device not identified by a yellow highlight and more icon it
    (5) choose 'pilot' and click on Update Driver
    (6) to browse my computer for driver software
    (7) choose "Let Me pick from a list of drivers for devices on my computer.
    (8) find the Windows common controller (Microsoft Common Controller) for Windows class
    9) click on Xbox 360 Controller for Windows
    (10) there will be an update driver WARNING out on the screen
    11) click Yes
  • Xbox 360 wired controller works only with Windows 8. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work.

    I have a controller wired xbox 360, not one of these pieces of plug. I put the USB controller and installed the device. However, it does not work. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work. I have not touched. When I search for a download for Windows 8 all get them are downloads for Windows 7 and below. It's a bit frustrating to not be able to use it. I would be very happy to help.

    Original title: windows 8 wired 360 controller

    I found the problem. I had the appropriate controller and installed the device correctly. This is the program that runs the unit that had either corrupt or missing files. I uninstalled the program and then installed from the Microsoft Download page. Now he works currently. Thanks for the support.

Maybe you are looking for