3745 router modules replaceable hot?

Similar Questions

• XR - 10 GB - SR replaceable hot

  I have a 4507R-E.  10GE slots 3 and 4 have Sup 6 L - E (X 2) supervisor, 1000BaseX modules (SFP) installed.

  This device is powered in a production environment.  Documentation does not explicitly specify if we can install X 2 - 10 GB - SR GBIC into the uninhabited GBIC slots on the Sup 6 L - E, while the power is on.

  So I think as the GBIC slots are not configured and are uninhabited.

  Someone at - it had harmful effects by installation X 2 - 10 GB - SR GBIC in the empty slots of Sup6L-E on a live production camera?

  Yes they are hot-swappable. Deletion and insertion online is supported. The only affect on the rest of the device is that because of the connection or the removal of the interface (routing or convergence tree etc.).

  A link confirming:

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst4500/hardware/...

• Windows Server 2008 R2 with Exchange of HDD replaceable hot backup?

  I have a server that is running Windows Server 2008 R2 with 4 exchangeable to hard drives hot.  3 250 GB disks and configured in RAID 5.  The 4th 1 TB hard drive and used for the backup.  With capabilities to warm the intention was to use the 4th hard drive as a player traded for backup purposes, put the inactive disks in a vault without danger for the security and protection.  Unfortunately I was able to configure Windows backup software to recognize the multiple backup drives.

  I hope that someone is aware of this problem and knows how to solve.  If yes I would appreciate to hear your solution.

  Thanks in advance

  Harry Myers

  Hi Harry,.

  I would recommend reposting in our forum Technet Windows Server Backup, where one of the experts in this area would be better suited to offer you a solution.

• Module of IPS for router Cisco 3925?

  Hello

  To be compliant HIPAA our society must have an IPS device. I was looking into it and I came across this router module (see link below). We have around 200 users behind the router and we have 2 locations with a similar setup. This module meets our requirement to have a decent IPS solution, my concerns are. It will be able to support a corporate network? Should what factors I take into account during the finalization of an IPS device.

  http://www.Cisco.com/c/en/us/products/collateral/routers/1841-integrated...

  Any idea is appreciated.

  The modules of network and all the 'old' Cisco IPS devices, modules and software are end-of-sales. Here's the announcement confirming that these specific modules.

  For a modest condition like yours, I recommend a small series of ASA 5500-X running in transparent mode with the power module of fire services running the IPS feature. It is less intrusive to your network ("bump in the wire") and only costs it for the features it offers. the exact model would be mainly depends on your current and projected throughput but for up to 50 Mbit/s with active political IPS you would be fine with the smallest model (ASA 5506-X).

  Find a Cisco partner, who has a security practice in your area. They can advise you on the details and provide a quote.

• My p6000 resumes signal from the wireless router. He has worked for months, has left, any help?

  HP Pavilion p6631p

  Windows 7

  I have a slightly new wireless router and the PC is always connected like this, but in the last days he will not pick up any signal from my router or our hot spots of our my touch 4g cell phone.

  It will not work so hard cable...

  Occasionally, he'll go get a weak signal, but I think there out crapped on me, anyone else having this problem?

  Warranty has expired 3 weeks ago! Pissed! I think they do it on purpose.

  If the antenna wire is not damaged or not connected, I would consider looking at an ASUS, Linksys, D-Link or Netgear PCIe x 1 or wireless USB adapter to replace the original one. Here is a selection of Newegg.

• [FlexRIO] Is it possible to define two modules e/s for my FlexRIO

  Hi all

  I developed an application to perform a test on a digital ASIC business and have a number of PXI chassis each with an installed FlexRIO. I have two flavors of DIO FAM the NI6581 & the OID NI6583. I want to write the code LV FPGA so that the application can use either FAM that it is mounted on the FlexRIO. Is it possible to set both FAMS IO in the LV FPGA project and the code detect what FAM is mounted and from there select the e/s to use?

  Thank you

  Nick

  Nick,

  While you could not define 2 FAMs under a single FPGA target in the project, you can do the following:

  1. create two targets FPGA, one for each Module IO

  2. write two screws FPGA separate, one for each Module IO

  3 compile the two bitfiles

  4. write a VI host that uses the host FlexRIO screw interface to check which adaptor module is attached.

  5. deploy the appropriate bitfile depending on which adapter module is attached.

  Keep in mind, we do not recommend the adaptation modules FlexRIO hot spare so that you wish to power your system every time you had to adapt modules.

  I hope this helps!

• Double channel FP - TC problem

  Hi, we have a problem with the FP-TC-J module, sometimes to the point of field is not perceived (MAX Returns a message "one or more specified attributes either do not exist..")

  The first time I try to move the module and this work very well, I corrected the module and work.

  The next day, the module have the same problem, I try to move without good results, we try to change the location of the module, but say MAx is not possible (seems this module is not known by the system).

  My question is how is possible whether the module is bad?

  Thanks for replying.

  Hi Nicola,

  the FP-TB-10 is designed to restart whenever it detects a new two-channel module since they are replaceable hot (quick flash of the indicator light). If there is an empty spot next to a module dual channel (a module HERE or AO and TC), FP-TB-10 Terminal Base may incorrectly detect that module dual channel. Since you have also two digital module, you can put the digital module next to the empty housing and see if that fixes the problem.

  I would like to know if it works.

  Best regards

  Serena

• Configure MXL switches blade for active paths using 2 Qty ANC

  Dear members,

  I need to configure a solution in which 2 CNAs Qlogic 57810 s was used to LOM & port B of each server blade m630, converged switches in A1A2 B1B2 & cracks MXL. All switches have under the IO modules mentioned:

  • Ports SFP + 10 GbE Module 4 port replaceable hot 4 x SFP + (optical or direct attach cables)
  • Fiber Channel Flex Module e/s, with 4xDell, networking, transceiver, SFP +, CF, 150M, SW, FIN

  Here are the requirements of the customer

  • Battery A1A2
  • Battery B1B2
  • All roads for SAN i/o Flex modules & LAN of SFP + must be active asset for a redundancy level CNA. attached is a diagram for a better understanding.
  • All empty ports of each switch blade ends at the DMZ switch with SFP + converter RJ45 1GBE customer.

  I know how to stack together A1A2 & B1B2 spend together, I need to know what needs to be set at the level of the CNA to support active active connections/paths. In addition, A1A2 & B1B2 switches to support IO END & Flex for convergence n/w infra.

  Your plan sounds great if there is any VLAN.

• On Satellite Pro A300-10 q keyboard does not work

  I have a Satellite Pro A300-10 q under XP.

  The function keys were not working so I downloaded the common Module and Hot Key Utility.
  After that the touch pad mouse and keyboard no longer works as well.

  Help, please?

  You can use keyboard in the BIOS (arrows) or when you start the operating system in safe mode?
  Which version WXP have you installed (SP?)?

  After please s part number for laptop (PAxxxx-xxxxxx)?

  I have Satellite A300-1LI with WXP and everything works perfectly.

• Equium A100: How connenct to WLan hotspot

  I'm trying for the first time to use the laptop to connect to a wifi hotspot. Already working on broadband with success at home.
  Even if I can get up available suppliers and it says connected to chose an I can't do this 'leap' to IE, establish a connection and the connection etc...
  Despite many hours of research on the web (at home!) for an answer I can't find how to do it.

  Everywhere, says it's simple... I'm missing a simple point here!

  Common mistakes are as below:

  = You must install on your computer to automatically receive the IP address and the DNS through DHCP.
  [Many people assign manually these settings for their home-router. [Points hot need to DHCP settings (automatic)].
  This image shows how it should be:
  http://anonym.shareinside.NET/?http :// www.vuse.vanderbilt.edu/SEDCON/networks/DHCP/dhcp4.jpg

  = You are using a proxy at home? At you stop when you try to connect with a Hot-spot?
  [It happens often that people forget to turn off the proxy when they are mobile].
  This image shows how it shouldn't be (number 2 does not have a tag inside the box):
  http://anonym.shareinside.NET/?http :// www.cas.org/Support/blast/win/IELANSettings.gif

  Concerning
  chain

• Upgrade SSD or hybrid to my T510

  Hi all

  I am considering upgrading my hard drive to my old T510 to 2 years since my original 300 GB drive fills

  I am considering getting an ssd or a Seagate hybrid drive, but I'm not sure.

  I want a faster startup time and improved performance. Right now it takes more than a minute to boot the system and sometimes seconds to load a large multimedia site. However, I also need big storage because I need a windows and linux dual system and a little store a few movies and a lot of music in the laptop. Because I don't want to replace my DVD with a second hdd, I hesitate between the SSD and hybrid.

  I was wondering if any of you have tried the hybrid drive on Thinkpad. How does perform? And anyone who tries it with a dual system? I'm a little worried the dual-boot will mess up with the ssd 6 GB limited is part of the hybrid drive, since it is so little space for both systems and management becomes much more complicated with two totally different file system.

  Also if I would go with an ssd, any recommendations? I looked at Samsung 830, Intel 520 and Crucial m4, all are good, but the problems that they are all SATA III, while my T510 support only SATA II. A bit of waste. But all the SATA II ssd seems just outdated and with older technology.

  Thanks a lot guys!

  fredhdx wrote:
  Thanks for your message and advice. You need a very good point about the controller improved on the new version of ssd and an option of DVD - RW replaceable hot to install a secondary hard drive. Can you explain more about the replaceable option hot? I know that the DVD player, but do you need to buy something like a ultra-baie adapter for the hard disk?

  Yes... need you the ThinkPad Serial ATA Hard Drive Bay adapter III.

  The reference is 43N3412 detailed here. More information about the adapter here (PS: photo shows one IDE connector that is false.) Someone needs to update this image).

  The Bay adapter is hot in that you can safely remove the material at any time & eject your T510 adapter using the physical button under the chassis. I like the provision of better eject buttons on the first series of T.

• How to speed up loop DAQ triggered using NOR cDAQ-9174 with NOR-9215 and NOR-9402

  Hello

  I use LV2010 and NOR-DAQmx 9.2.2. I have a NOR cDAQ-9174 with a NEITHER-9215 4 channel 100 k simultaneous ADC and NOR-9402 4 channel DIO module trigger and reset.

  We run WinXP sp3 on a Dell M4400 core 2 duo @2. 26 Ghz.

  I used the code example NI DAQmx for acquisition of tension with trigger HW. My goal is to try all 4 channels on the 9215 simultaneously when a trigger is received on channel 0 of the 9402, after data is read, I use channel 1 on the 9402 to reset the trigger of the target material.  I have a version of this work, however the maximum event rate is ~ 16/second. I have the Setup 9215 for finite samples / 10 samples per channel which is ~ 400uSec of conversion time and I realize he is above in the appeal of vi, but ~ 50mSeconds worth?

  The target detector can put out up to 1 k / event triggers / seconds.  Only, I received a rate of 8 per second and I added the NOR-DAQmx control vi driver and chose "commit" this did double the rate.

  My question is what is the maximum rate of loop for these devices (trigger/conversion/reading device / reset) and start over? I noticed that just let free the 9215, carried out using the 'Acq & chart internal strain Clk' raised only the rate of events up to 20 Hz.

  Thank you

  normbo663

  Hi normbo663,

  You can get this works far better assuming you have an available counter (there are 4 on the backplane of the 9174).

  DAQ Compact supports the tasks of meter output "redeclenchables" that can be used to generate a finite pulse train.  You can set a task of finished meter redeclenchables output to be used as sample for your task of analog clock.  The task of the meter output will be re-Army (less than 12, 5-25 ns) as soon as it's finished out the last pulse.  The task of analog input would be configured to run continuously, but it would only sample based on the output of the meter triggered.  For an example, see here.

  You can reference the internal counters on the cDAQ without signals through a routing module using: cDAQ1/_ctr0 (right click on the chain counter control, then select i/o name of filtering and check channels internal to add these options to the drop down).

  Thus, with the tips above, you should be able to immediately re - arming your analog acquisition on the 9215 using one background basket counters.  It seems that the second half of the application is to use a second channel on the 9402 to reset the trigger of your DUT.  You can deterministically generate this signal so by configuring a 2nd redeclenchables meter out task (single pulse, but this time).  All you need to do is the initial delay on the appropriate value for your analog acquisition.  Trigger this counter on the same PFI line that trigger you your analog task from.

  Using counters to generate the signals you need in a deterministic way, the loop becomes is no longer a problem (as long as your input buffer does not overflow).  You may need to re-read several triggers at the same time for the loop to keep (for example to read 1000 samples each, which would correspond to 100 triggers 10 samples).

  Best regards

• "Windows needs to install driver software for your Internet access server.

  Hello everyone, since April 3, 2010 I get this message just after I turn on the computer and Vista SP2 is ready to ROCK, I change my router in 31 March, for a Lynksis E1000 and it works perfectly since then.

  Now, in the cry of the message I have different options from the tree, if I click in the star of windows option "locate and install driver software (recommended)" the search for drivers to install, but then another small window appears asking me to insert the CD that came with my Internet access server (it shows as another option that says "I have not a disc. Show me other options') and there is when I stop because I fear :)

  What is c? WHAT is an Internet access server?

  My ISP is Comcast, I don't know if it's important.

  Can someone help me? THANKS :)

  Easy problem to solve, go in right Device Manager click on internet access server select Update driver they are looking on the web for the driver. It may take up to 5-10 minutes. The Device Manager will change other devices forInfrastructure. network devices / Microsoft Wireless Router Module.

  Terry

• E3000 brick 3 times in a row! * beep *?

  Well, let's start at the beginning...

  Initially, I started with a WRT610N (essentially the old version of the new E3000).  I had used a few months, when all of a sudden I was stuck with the power light flashes, which means that the firmware has been altered.  I contacted support and they guided me through the process of trying to restore the firmware using the tftp.exe program with no luck.  Unfortunately at the time this happened, the E3000 comes out, if they said it could be a month to get a replacement WRT610N!

  So I decided to just go grab a BestBuy E3000, as I had some unused gift cards there is.  I bought the E3000 & used for literally 2 weeks, and then the same problem.  Flashing light power, corrupt firmware.  Yet once, I tried to restore the firmware with no luck.  I should mention, whenever I tried to ping the router after you set a static IP address it resulted in a 100% packet loss, which means that the router did not communicate with my PC.

  So with that it is within the period of 30 days, I just went & swapped it for a new.  A few days later, same issue!  Is gone and swapped for another, I am now on my 3rd E3000 in less than a month!

  This could be the cause?  I notice that the router gets pretty hot, but in a well-ventilated area, so I not sure what more I can do about it.

  This is supposed to be the high-end router LinkSys there & I keep having major problems with each of them.  Now I get a lot of data through it.  I have a NAS, 3 PC, PlayStation3, Xbox 360, Wii, iPad, several notebooks, etc. on a cable Comcast 18Mbps connection.  But this thing should not manage the large amounts of data?  I mean it's the end router above LinkSys did, so what do I do?  Buy a real Cisco router for $1000 for home use?

  I am at a loss.  If anyone has any ideas they would be certainly appreciated, because I think that Best Buy is really starting to get tired of me...

  Update.

  After looking on the internet and try several different 'tricks' to unbrick my E3000, I almost gave up.  However I found a way to make this thing coming back from the dead.  My router has a power LED flashes fast which means that the firmware is damaged.  Wireless light would not come at any time.   No amount of resets or combinations of reset tips seemed to work.   I couldn't go to the router by all means.

  I was able to unbrick my E3000 today by visiting here and follow the instructions posted here: http://www.lancelhoff.com/how-to-fix-a-bricked-linksys-router/

  I found no directions like nowhere else.

  It worked for semi-bas brought me total brick a router fully updated.  After the reading of the procedure, there are some tips that I have learned that might help you.

  I was confused at step 1, as the image of the firmware to use.  I thought there may be a small piece of firmware database to load, but in the end I downloaded last (today 1.0.03 which is large 7.5 MB) firmware updated to Cisco on the desktop and then renamed it according to the instructions in works.bin.   I wasn't expecting for some reason any than to use the complete firmware upgrade file was correct, but it turned out it was.

  Also in step 2 when he talked to connect the cable to the router directly from ethernet port... put your computer cable in one of the 4 ethernet ports of the router rather than the yellow ethernet modem port.  Just clear up a little confusion for you because the process does not work the first time, and as such, I wondered if I was doing things.

  He also stated in his additional notes that sometimes it takes a few tries to make it work... and it does.  I had to do mine 4 times before I got it to load the firmware.  I was surprised that the firmware of 7.5 MB file loaded so quickly.  Shortly after, I looked over and saw the light of the symbol attached wireless works again.  I don't remember how long it took after the firmware loaded for the router to reset, but he did probably less than a minute without having to touch anything me.  Then, I could see the modem with the browser at 192.168.1.1

• EA6350 2 weeks just stop working, power light only

  I just bought an EA6350 less than 2 weeks ago and came home yesterday night with no network no internet. The main power light is on top, but that's all, there is no activity light flashes on any wired connections that are wired and the Ethernet of my DSL modem not light either, as he does not see a signal sent by the router.  Wireless network SSID not broadcast.  Router was extremely hot to the touch on the bottom.

  Tried to disconnect and reconnect, nothing has changed.  Tried the reset button, but it seems to do nothing at all.  Sam during the night to cool off but still nothing works.  Old router plugged in and all is well again.

  What is this thing just dead?  I have another one that worked very well for several months.

  Thaddeus_A    Thanks for the reply.  I just heard of Linksys support and they directed a replacement.  Thanks for the help!