3D Issue of the Qosmio F755 - 3d 350 after replacing the screen

Similar Questions

• Mail application has letters strange "Rfu" at the bottom of the issue of the screen

  This showed on my wife 5 with IOS 9.3.1 iphone and wonder if it's been hacked?

  

  If you log on to the account of a browser, this arises? If so, I would change the IPL on the account. If this isn't the case, I would try to reset your e-mail account on the phone.

  First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Then go to settings > mail... and to add the account.

• Toshiba 50L4353D shadow in the middle of the issue of the screen.

  Hello everyone.

  I would like to help to know what is this problem and how can I be able to solve it please. I have this shadow that goes from left to right in the middle. I am fully updated on firmware updates and tried to adjust the backlight, but it's still there. I see only when I choose an HDMI connection with no photo.

  I watched the last Star Wars movie last night and did not see. Nobody knows what can be causing this please?

  It is not a big problem but would like to know.

  Thank you very much for the help.

  Don't know how to edit my post so had to use the answer, but the image I posted makes it seem worse than it is.

• Qosmio G30-204 - how to replace the screen?

  Hi people. I have a Qosmio G30-204.

  The screen to the right corner is not sure as the rest of the 3 corners of the screen.
  How can I tighten again?

  Where are the screws on the screen?

  Hello

  Have you tested the laptop to an external monitor? Perhaps it is not a problem with the monitor and your graphics card or card mother is causing this issue.
  Check it!

  Moreover I replaced didn't a computer laptop screen myself again because it s too difficult and delicate in my opinion. You need to remove a large number of screws and you should be very careful that you n t destroy a part or material of the laptop.

  I think the best way is to contact a local laptop technician you. They can try to help you and they have enough experience for the exchange of material on a laptop computer.

  Good bye

• Several issues of the G20 (pixelerrors, IR, standby and Hibernate, TV)

  Hi people!

  I bought a g-20 a few weeks ago and from the beginning I had several problems with my laptop. I hope one of you can help me! Moreover, it is the G20 with TV Tuner and things supplied with it...

  (1) I have a pixel on the screen error. As I use the black background its not very nice. does anyone of you have also pixelerrors? or are all your screens ok?

  (2) I would use internal infrared to connect to mobile phone. Unfortunately, there is no driver or whatever installed, so IR does not work?

  (3) I had the problem that when I try to go sleep or hibernation, the system hangs up and stops. I reinstalled the laptop complete with the recovery and understood, that, when the bluetooth driver is installed, this error occurs. Anyone know how to solve the problem that the two works?

  (4) I'm from Switzerland and use cable television. I connected with the laptop and installed MCE channels via the postal code and so on... Well, it scans through all, but actually I have maybe 10 channels work proberly. on about 50 to television. on television, he works all fine, but the same line does not all channels on laptop. is it possible to use other tools to watch television? or scan the frequencies manually, then could I myself check and tune the channels myself? for example, I also use teleclub (identical to the first in Germany) and it should be a signal that is decoded on the wire. but the laptop can't find the channel or its does not work.

  (5) when I am in sleep or Hibernate mode (after reinstalling I just does not have bluetooth (see above) then it works) the laptop itself always starts at the 0820 in the morning. so no one does anything, it starts from only. any idea?

  I hope I have now all the errors found and explained. After all, I am not very satisfied of all. The G20 is a laptop of luxury of the upper priceclass and early hurts only. As for me, most of the included items are for me to work (tuner TV, IR...) I bought this laptop just because of that sort of thing. and it was written anywhere, the tuner can only work with the qosmio player or the IR does not work.

  So I hope that you are my solutions where I can get help and forget about my troubles ;-)

  See you soon

  Atanvarno

  [Edited by: admin]

  Hello

  As Chris said, aren't serious misconduct. You should check the manual which is preinstalled on your laptop exactly. You will find lots of information on IR, Bluetooth, Qosmio Player, etc. I m you will find a description on this issues.

  Good bye

• HDMI output on Qosmio G40 - horizontal line on the screen

  I connect my Qosmio G40 to an 46F86BDX of Samsung LCD via HDMI. On all my films, when there is a shift, I see a horizontal line on the screen. Sometimes is in the middle of the screen, sometimes lower.

  I tried my pc with another TV and a different cable, but the same problem. Someone knows the same thing?

  Thanx

  Hello

  > On all my films, when there is a shift, I see a horizontal line on the screen.

  If I understand issue you this horizontal line appears ONLY on and external TV and ONLY if there is some faster movements of the pic.

  If so, then I think it has nothing to do with G40 Notepad.
  I have read that those issues could be related to the new TVs LCD then to watch movies in high definition.

  I think you should read a few tests and reports on similar issues on LCD TVs

  See you soon

• Pages - trying to link the issue to the paragraph of the answer

  Hi there: neophyte user Pages for businesses trying to link the issue of the survey to a paragraph "answering machine".  As an example...

  Question:

  What's your brown grass?  Yes No

  If the answer is Yes, then want to fill and print a paragraph explaining...

  Your grass is Brown, because you're not watering or you need phosphorus or whatever.  Here's what you need to know about this resolution.  etc, etc.

  Any suggestions on the Pages or other popular apps.

  V5.6.2 pages is not suitable for the use of processing of affairs where one expects it to be a clone of Microsoft Word - who is not. There is no content link intra-document, support forms or runtime macros that manipulate the content of the document when the interactive user input. Pages is not a web design tool.

• I cancelled iTunes on a Macbook Air, issued by the school.  All my music is stored/saved on my iMac at home.  If I delete the playlists and songs of the Macbook it will affect my master library?

  I cancelled iTunes on a Macbook Air, issued by the school.  All my music is stored/saved on my iMac at home.  If I delete the playlists and songs of the Macbook it will affect my master library?

  Unless you're 'home sharing', which he does not seem like you are, two libraries (macbook and iMac) are distinct, so a change does not affect the other.  Best way to test would be to remove a few songs you can download easily and see if it changes.  But I don't think it will be a problem.

• I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues.

  I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.

  What version of Pages is running on your MBP?

  What version of Mac OS X is running on your MBP?

  The MBP is not iOS running.

• Qosmio G10 blue of the lines on the screen

  Hi everyone: -.
  I have a problem with my Qosmio laptop, it was on and when I became a black screen and the system rebooted. Blue lines suddenly appears on the screen (Qosmio logo) point starting form windows is unbootable. I can start in safe mode. I fixed the system, the problem is still there. I saw this topic in the forum, but it was not possible to write a response. could someone please give all my ideas to solve this problem.
  PS: I think I'm out of warranty
  thanx

  Hello

  In my opinion there must be something wrong with the hardware. Maybe the graphics card is malfunctioning. I suggest you contact the Toshiba, because it can make a detailed diagnostic test.
  In the worst cases, we must change the motherboard.

  Good bye

• Qosmio G10 has vertical lines on the screen

  I have a G10 which I use for the last 15 months since I bought it.
  However, there are now 4 vertical lines on the screen, 2 Purple (magenta?), 1 yellow and 1 cyan. Other than these lines there are no other problems, it never fell down or something like that.

  The lines are still there, they do not change in any way and are always in the same place. They appear on the screen at first power up, before the Qosmio logo lights up.

  They have not all appear at the same time, they all appeared individually in the past two months. I've seen the last of them disappear briefly, then stay on.

  I guess that my screen is dying slowly, I guess to be an expensive item.

  Any advice thrown my way would be greatly appreciated!

  I took a picture of the screen you will find at:

  http://www.imagebucket.NET/images/lldata/displaylines.jpg

  Note: the photo was taken with Media Player full screen on a black image, just to clearly show the lines)

  Hello

  I suggest you connect an external display to check if it's a graphics card or a display problem. If cela pipes appears also on the external screen then it could also be a problem with the graphics card.
  If these lines do not appear on the external display while the display of the laptop has a malfunction.
  However, this does not change your situation. I recommend you contact the Toshiba ASP to solve this problem.

• Qosmio G15: Green vertical lines on the screen

  All started an ordinary day, when I was playing music on my iTunes.
  All of a sudden my screen went black and the music stopped, but my power button is always blue. Since then, whenever I try to start it, it goes on the Qosmio screen and Windows XP screen and plays the startup sound, but there all those green vertical lines on the screen. And then it goes black and tsays in this way.

  I was able to use Windows VGA (whatever that means) with lines all over the screen, but I am not able to start normally. Does anyone have any suggestions or have had the same problem? Please help me!
  I have a Toshiba G15 Windows XP Media Center, but am not able to use it normally.

  -Alexis

  Hello

  You can enter operating system in SafeMode using F8 t the beginning upward?

• Qosmio F30-112 - small strips and dots on the screen

  Hello

  I need help, my laptop (Qosmio F30 - 112) have a problem.
  When I started it scratch on the screen and flashes.
  Then if I try to reboot it works, but not normal; still have a small scratches and dots on the screen.
  I checked it on the Device Manager NVIDIA GForce with a yellow mark.
  I tried to uninstall it but nothings happened.

  Please some body help me what to do in this case?

  And if you have to replace the VGA CARD, is it possible to upgrade? and what (NVIDIAGforce) parts are compatible for my laptop (RAM memory upgraded 4 GB 320 GB hard drive and windows 7 Home premium)

  Thank you
  rtmasagca

  Hello

  Have you tried to install or update the display driver?
  Please check this because the yellow exclamation mark in Device Manager may mean that the display driver is missing and so the graphics card does not work properly.

  Otherwise, it could be a GPU problem.
  This can be tested easily; connect an external monitor and check if the same stripes, points would be visible on the monitor that is eternal.

  If Yes, then it s certainly a GPU problem.
  In this case, only the replacement of the motherboard might help.
  Also, upgrade is not possible.

• The dust under the screen of the Qosmio X 500

  Hello

  I purchased a Qosmio X 500 to Saudi Arabia in April last year and Ive brought to the India where I currently reside. Last week when cleaning out my screen randomly, I noticed a few specks of dust in (lcd/led panel below). This does not preclude my intervention on the machine, or are facing other problems of performance. but the presence of these particles of dust under the screen gorgeous 18 '' becomes a horror.

  I hardly take the laptop outside or use in difficult or dusty environments. I have a guarantee of the EMEA which is valid until April 2015 and I intended to ship the laptop in Saudi Arabia to rectify. Any suggestions on this subject would be greatly appreciated.

  Thank you and best regards

  Dr. Abdel Ansari

  Hello

  In my opinion, you make the right choice. Laptop has guaranteed EMEA for Toshiba in Saudi Arabia service provider will help you in this. Of course, laptop must be disassembled and cleaned.

  Good luck and I hope everything will be OK.

• X 300-11 of Qosmio - can't calibrate the screen

  I just got in photo retouching and I'm having a lot of difficulties to calibrate my screen on my Qosmio X 300 - 11.

  I am using Adobe gamma to make the correct adjustments, but it won t work properly. I start by changing the brightness/contrast at the appropriate level, but every time I continue to try and adjust the gamma that the screen immediately goes back to the initial brightness. I then have to go back and move only 1 point upwards or downwards on the brightness and back again (Control Panel Nvidia) slider to get the correct settings. If I can continue to try to adjust the gamma again the same thing happens again. And whenever I restart the computer, the screen is back that it is the normal brightness level, although levels remain the same in the Nvidia Control Panel.

  So it of impossible for me to reach the right levels. I have all the latest drivers installed and I don t know how to go about this to do right. Really would like some help here. Has anyone reached the right levels for photo editing?

  Thanks in advance

  / Thomas Sweden

  Hello

  I don't have much experience with Adobe Gamma, but maybe this can help you: http://kb.adobe.com/selfservice/viewContent.do?externalId=321608

  One thing is important:
  Note: After you remove Adobe Gamma Loader on the startup folder, Adobe Gamma is always available in the Control Panel, but its settings are not loaded at Windows startup. Photoshop continues to use Adobe Gamma to access the monitor profile that you specified.

  Good luck!