4.0.4 Tranfer of extension unit does not
Call handler created with the extension and for standard hours configured to forward to a Subscriber no extension. Other disabled transfer.
When I call the call handler it will Manager wishes, even if the call forwarding settings Specifies not to go to wishes. I said yes, "sound to the Subscriber to this extension" and this setting does not take effect for hrs standard or closed. He always goes to the host Manager.
Removed and added the Manager with the new name, still the same issue. ContactRule.Extension specifies the correct setting for the standard rule.
OK - do not work what you do, it's not supposed to. If a call to the front by another extension directly into the unit, the unit will automatically ignore the rule of transfer on the Manager or the Subscriber and get right to the home. This prevents the window "transfer buckles" If a call forward and the unit try to call the phone that transmits etc. until all ports are chewed and dirt hit system.
You can get around this by making the different a couple things I talk about in the paper 'the audio text in the unit applications' on the Documents page of the site http://www.CiscoUnityTools.com . It is just the channel manager a 2nd - the flag of the 'transfer of skip rule"is used only for the first Manager/Subscriber the call strike in unity, after that she will make the transfer on the next Manager to what happens. That's how I'd do. You can also have blank greeting on the Manager and the welcome message after action defined for 'attempt to transfer' for himself. It's a little more dangerous but it only invovles a Manager. I would use two handlers for it, however...
Tags: Cisco Support
Similar Questions
-
The 4.0.5 unit does not stop
When I click on tne * unit * Stop button in the system tray, I have an error message in the viewing Application event log:
===
ID: 1054
Source: CiscoUnity_CsServices
Message: AvCsGateway: StopCs failed, no access to %1 with the type of Subscriber = %2 (err = 3%). A Subscriber associated with %1 must have administrative access.
===
http://www.ciscounitysupport.com/find.php?EvtID=1054&EvtSrc=CiscoUnity_CsServices
===
and the unit does not stop.
I don't know why it happened.
He has worked previously.
What should I do?
Fact on behalf of your connected to the server with have a unit administrator access? Try to do a right-click on the icon and clicking on system administration and see if happens fine. You may need to check the account that your registration with is an administrator of the unit always and/or AD rights for this user. Perhaps something has changed.
-
Unit does not not after installation, missing drivers, dot know were to get drivers
Unit does not not after installation, missing drivers, dot know were to get drivers
George2222 (2) you were right. Problem solved, thank you.
-
Extensions Manager does not come with Adobe first CC trial?
Hello
The extensions Manager does not appear with Adobe first CC of the trial?
I like to add the plural eyes 3, can someone help me?
Thank you
Georgia
Please try: https://helpx.adobe.com/x-productkb/global/issueswithinstallingaddonsCC2015.html
-
The extensions Manager does not see Adobe Photoshop CC 2015?
The extensions Manager does not see Adobe Photoshop CC 2015. All applications using ustanovliny creative cloud
That's right, that it is no longer supported. Please refer to this article: Adobe Exchange
-
The extensions Manager does not in 2015 CC
Just installed CC 2015, but the extensions Manager does not work. I've deleted and reinstalled and it still does not work.
Hi Alfredo.
See a related discussion on the same topic: Re: Extensions CC2015 gone
I heard the team there are some problems with the Add-ons and the command line tool, and the team is trying to solve. I'll let you know as soon as I have an update.
See Adobe Exchange for official communication on the extensions Manager.
Thank you
Devendra
-
The CC extensions Manager does not see .mxp
I can't open .mxp in the CC on Mac OS 10.8.5 extensions Manager. The CC extensions Manager does not see the files.
I did the update and all the steps: http://helpx.Adobe.com/Flash/KB/install-extensions-Flash-Professional.html
CC extensions Manager can't mxp extensions that have some limitations and have been deprecated in CS6. You must use the CS6 extensions Manager to convert the mxp zxp extensions extensions. There is a menu item for it. If you have not installed Extension Manager cs6, you can get it from http://www.adobe.com/exchange/em_download/em6_download.html .
-
Help my extensa 4420 does not illuminate
I have a laptop Acer Extensa 4420 2009, that does not illuminate.
He sat for 4 months unused. Don't work on battery power (15 min max)
Finally bought a new battery.
When I press the button start is there no response.
I checked the power supply: good 19.1 V dc
I have a new battery.
When I plug in the power supply, I get the fire A GREEN on the incicator of battery charge.
I tried the static reset: remove the battery & power supply, press on & hold start for 30 seconds.
I deleted & reset memory modules RAM (2 x 1 GB).
I opened back and reinstall all connections of Ribbon & connectors, hard drive etc.
Last fall it's intermittent start up, I replaced the cmos battery, that fixed.
Could use some suggestions where to look next.
Mike D
Problem SOLVED:
I did more reading. Find more on the reset procedure.
(1) I unpluggged the battery & left overnight.
(2) in a hurry & has held start button for 1 mniute.
(3) to replace the battery (new) & start-pressed: the UNIT POWERED UP!
I am trying to load updates.
Microphones
-
New Firefox v. 29 - Extension 'Cult' does not show in the main toolbar
Just got the latest update of Firefox this morning. I used to have the extension 'Sun Cult' on my 'add-on bar' and expected to see this extension in the main toolbar now. However, it is not. When I open "Customize", I can't see the extension, but is not on the toolbar main but UNDERNEATH. I tried to go back by dragging and dropping, but it will not move at all. I even tried to drag to the new box 'Menu', but it still does not move. This is kind of stuck in limbo. Can someone help me get this extension in the main toolbar? Thank you!
On which toolbar is this icon currently positioned if check you through the extension settings (display > display investment)?
Have you tried to put the button on a different toolbar via its settings?
-
Power of the Satellite P100-240 unit does not work properly
From time to time my power (PA2521E - 2AC3) unit starts beeping and stops the power get to the computer, forcing it to drain the battery.
Summer happening for several weeks now and sometimes it stops itself, but other times I have to put my diet off for hours and keep checking to see if the beep stopped.
It does not overheat as I only for about 30 minutes before it starts to beep.
If I turn off feeding the continuous ringing for a few seconds before disappearing for good.What is - this and I should send it back?
Hello
I never heard that the AC adapter would do some sounds or would start beeping
In my opinion it of not normal and the adapter must be verified.You should definitely contact the ASP (authorized service provider) in your country to control and perhaps this part needs to be replaced
I think the warranty is valid at the moment and the replacement is done for free
Good luck
-
Installation of extension Spinner does not work
I am trying to install the user of Spinner to WebWorks interface and I get the following error in the console to ripple Web Inspector:
TypeError: 'undefined' is not an object (evaluation of "blackberry.ui.Spinner.open")
I followed the instructions on the following site:
https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/Smartphone/SpinnerControl
But the site indicates that these instructions are "is no longer up-to-date" and that I should use:
which States I need a jar file. There is no jar file in the file list.
Please help to explain what is needed to make the user of available Spinner interface:
-SDK WebWorks 2.3.0.9
-Waving 0.9.0.16
-Windows 7 64 bit
I think that the ripple does not support extensions, try using a Simulator or real compatible devices
-
I was able to recover a device this morning at my local Office Max and have really enjoyed the last 10 hours to use my new Playbook. Tonight trying to get my installed chips of debugging, I decided that my PC could not connect to my playbook, and maybe I needed to reboot the device. Holding the switch down, choose restart. Device seemed close and started the boot sequence with the "BlackBerry PlayBook: logo and pretty flashing lights." The UNIT will not go beyond this screen. He was now trying to start for more than an hour. I tried power off, standby, then power on. I am worried that I have a defective unit. Does anyone else have this problem? Is there a magic button sequence to get a clean boot? any help is appreciated.
Thanks for the suggestion of Peter - I was scouring the web last night and saw some of these threads.
I ended up calling for the support
USA: 1-877-644-8410
PEUT: 1-877-644-8405and worked the following sequence:
-hold [power] AND [volume] for 25 seconds (device off after about 10 seconds)
-Press [power] to turn on (start screen stays hung)
-hold [power] AND [volume] for 25 seconds AGAIN
-Press [power] to turn on (which actually worked)
the representative said that you may need to do it 4 or 5 times. If you experience the problem, try this first.
In addition, this problem moved directly after the update. I restarted my camera a few times (long [power] press throughout the day yesterday. My Wifi was funny so I thought this might help.
Am happy that I don't have to send the unit back.
-
MP3-Info Extension (MP3Ext) does not not with Windows7 64 Bit
Does anyone know why Extension MP3-Info (MP3Ext) does not work with Windows7 64 bit. I heard, that it works as expected with Windows7 32 bit, but I have only the 64-bit Version of Windows, so I can't check it out.
In Windows 7 64 bits of the program can be installed, but the PropertyPage, icon Manager, and tooltips don't work.
MP3Ext is an extension for Windows Explorer.
It is a freeware program and can be downloaded with the source code in C++ here: http://www.mutschler.de/mp3ext/
I'm not a C++ programmer, so the source code does not help me. But maybe someone can look at the code and can finally say, what's the problem.
Help, please
Alfg
@uDJinGrey,
I think you're wrong. At least for Windows 7 64 bit.
You wrote: "go to windows Explorer, go to any mp3 file and right-click on it, then click Properties.
"It should be a mp3-info tab, click on that.
but there is no mp3-info tab .
What you wrote is true for Windows 7 32 bit.
The only solution is to recompile the Extension Mp3-Info (MP3Ext) with a 64-bit compiler C ++.
The reason is that Windows Explorer is a 64-bit application and it cannot use the 32-bit dll from Extension Mp3-Info.
-
Packaging in InDesign gives error Plugin Adobe Extension Manager does not see
I have an old file Indesign which formerly FontReserve.
It is no longer installed and has not been for 3-4 years
I'm unable to package a file without the plugin error saying it can't find the font reserve.
It does not appear in my Adobe Extension Manager CC application referred to in one of the programs listed
How can I get rid of him
Thank you
Peter
moving to InDesign support forum
-
The CC extensions Manager does not know that Photoshop CC 2015 is installed
Hello world
I'm learning to make extensions for 2015 CC Photoshop with Adobe Extension Builder 3
I edited the manifest as:
< parameter Listehotes >
< host name = "PSAR" Version = "[15.0,15.9]" / >
< host name = "PHXS" Version = "[15.0,15.9]" / >
< / parameter Listehotes >
Given that Photoshop does not load the files generated by Eclipse or support, I generated an XMP file.
Well now, the handler extensions gives you the following error:
This extension cannot be installed, it requires the version of Photoshop to range from 15.0 to 15.9 inclusive
How come????????????????????????????????????????????????????????????????????????
"Everything is up to date since" ""it IS THE CLOUD '
Stone
The extension manager is not supported for 2015 of CC. Please see this link: Adobe Exchange
There has been a lot of posts on this subject so far. Please check the previous discussions for more information.
Maybe you are looking for
-
whole line on the value of conditional formatting
Hello, I'm a numbers file where I have a few lines filled with values and when a specific cell will fill with a X in the entire line must be indicated in bold. A B C D 01/01/16 operation 1
-
How can I check which version of Thunderbird I have? and is it safe?
-
Months does not change the calendar
When enter info and select date calendar returns to active last month.
-
Why he keep telling me that I have to insert the disc when I try to install Silverlight?
I tried several times to install microsoft silverlight, but it always tells me that I have to insert the disc into the CD-Rom drive. I do not have the disk to Microsoft Silverlight, I try to download from Microsoft. Why he keep telling me that I need
-
burn a video dvd instead of data dvd
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: How can burn you a data dvd videoinstead dvd if the option is not there You have problems with programs Error messages Recent changes to