4 cl of 1043 replace Intel 2230 with Intel 6235 HP ENVY (or another card for 5 GHz wifi)

Similar Questions

• problem with the creation of my usb data card connect to a wifi hotspot network!

  Hello, I have g62005ax machine of hp pavilion and the use of windows 7 home basic service 1 since I bought it, I map of 3g data through which I use internet on my laptop, recently I had a phone android romaric mi3 and wanted to use the net to my data card 3 g on phone via my laptop by creating my cell phone as a wifi hotspot I tried connectify and virtual wifi router and mhotspot, enable me to create a hotspot wifi successfully, my phone can identify them and even be able to connect to the wifi network but I can not surf or download in the phone no matter what app or browser, phone says connected wifi network and phone receives the data as 0.15 0.58, 0.98 KB. My card data speeds work fine on pc on 1 MB/s with no problems, but what is wrong I am doing even after the connection is established?  As I said I tried different pc applications, given that my phone might have problem then I tried another star of the Galaxy samsund phone pro, it also connects to the wifi network but the same problem, IE. No surf, the so problem is not end of my phone, what am I doing wrong here?

  Hello IRON-MAN.

  Thanks for posting on the HP Forums!

  I understand the hotspot of data card USB that you create from your laptop is not working properly. I'll do what I can to help out you! Please follow this guide to make sure that you follow the correct procedures: How to create a WiFi HotSpot with your connection Internet/card USB Data...

  Please let me know your results. If you're still having problems, please provide some screen shots so I have something to look at. Thank you and have a great day!

  Mario

• With the help of 1102 and 1308 cards for different input types

  If I use maps 1102 and 1308 to receive both voltage and current signals, remove the resistance of the 1308 on channels, I don't want tension?  I guess that is another way of asking, is it possible to always send the current signals "through" the 1308 directly to the 1102 so that I can use only one card of 1102 for my application?

  Hello Jim,

  Thanks for the clarification, I misunderstood the original investigation.  When you reference the Manual for the SCXI-1308 module, it can be read on page 2 you can measure the current and voltage.  In order to measure the voltage, you should remove the resistance of the current loop, and later, he identifies the resistance and their respective channels on the next page, 3.  That said, delete the resistance won't be a problem.

  Best,

• Stream of 6537 s on the drive with another card as well.

  Hello, we are planning to have a platform that has 3 PXI 6537 s and another card for playback of a sync signal (North Atlantic Instruments 75 3). We capture cards PXI 10 MHz and the 3 75 between 10 and 20 Hz, regardless if we taste a bit faster than that, but we can't go much more slowly. We need to store the result in a known file format so we can analyze it later.

  From the example of reference for data streaming of double PCIe 6537 s example of disc (http://zone.ni.com/devzone/cda/epd/p/id/5315), it seems simple enough to add another PXI card.  We are OK with that.

  What is the best approach to take the card sync?

  Our first choice is so far:

  To read a value from the sync every time it happens around the loop of the producer; i.e. every 20ms. This will taste at 50 Hz, but that's OK. Store us the values in a table of fixed value size zero and push the table on the queue at the end of the case 'true '.  It's easy enough but... The 3 1 d Raw U32 DAQmx readings work quite quickly to allow the Syncro values to the queue, in the 20ms window? (We have operated there should be about 16 MB of data per card for each reading). If not, is it close enough that he could be twisted so that sync data can be queued as well?

  Our second is:

  We plan to read data in sync in a zero arbitrarily large array initilized, especially if we know the size when write us data to the file. This can be filled at 20 Hz, in what I'll call (or the love of argument) a producer of the second loop. We could protect access using semaphores. In the loop of consumption, we read the three blocks of data, then data sync; That is to say:

  • read three lots of the queue database
  • lock the semaphore
  • write the content of the table
  • zero the content of the table
  • unlock the semaphore

  Does anyone know of a decent/better way to do this?

  Are we on track?

  Thank you

  Jon.

  Hi Jon,

  Yes, I think that your hypothesis is correct.

• How to replace Windows 8 with Windows 7 on a Compaq CQ58

  Hello!

  Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:

  1. it is posible to change 06:52 on my laptop CQ58?

  2 and if so, can I have programs default HP on this subject?

  3 and if so, how?

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.

  2 and if so, can I have programs default HP on this subject? NO.

  3 and if so, how?

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  (15) download and install the drivers from the support page for your computer.

  After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

  My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

  I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

  Thank you guys

  A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

  Good luck!

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• Replacement of HHD with SSD in HP Pavilion TouchSmart Sleekbook14-f027cl

  Is it possible for me to replace the HHD with SSD in my HP Pavilion TouchSmart Sleekbook14-f027cl? And if so, how? For example, I'm looking for (a) a guide to open the computer without damaging it (I found one for Sleekbook 15). Also (b) I would like to know if I have to update the BIOS / other computer settings.

  Finally, (c) are there brands of SSD, I should not do?

  Thank you for your help.

  What has been said here applies to you:

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-Pavilion-Sleekbook-upgrading-hard-drive-to-an-solid-state/m-p/3190769#M28503

  Your model is very difficult to upgrade. If you want to move forward in any case post back for assistance.

• Want to Phoenix 810-379stCPO: replace SDS disk with disk cache sata hard

  How can I remove the 16 GB cache who drive and replace it with a HARD SATA 3 TB.  Only 3 slots available and I need another location more disk space.  I also want to replace the boot with a disk of sshd disk.  Is it advisable or will I lose the performance with this option?

  Thank you very much for your help.  I'm about to order a Samsung 500 GB EVO 850 to install as my boot drive.  Thank you for your contribution and your help.  It's really appreciated.

• Guide: replace the HDD with SSD, Lenovo Y480

  Lenovo
  That's how I replaced my HDD with a SSD in my Lenovo Y480. I did it immediately, so there is no user file to consider. I used a key from Lenovo recovery. Read this guide in its entirety before starting.

  Execution time: about an hour.

  Items, you will need:

  -Y480 Lenovo

  -New SSD (I chose a Mushkin Chronos Deluxe because my research lead me to conclude that it is the best available from June 2012)

  -Small Phillips screwdriver

  -Butter knife or similar to remove the HARD drive. There is not much space for your fingers in there.

  -DVD-r blank

  Step 1

  Turn on the computer.

  Step 2

  Write the number '1' on a blank DVD-R and insert into the optical drive.

  Step 3

  Press the small button just to the right of the power button. This launches a recovery key.

  Step 4

  Follow the instructions on the screen to make restore disks. I chose the factory restore option, which required three DVD - Rs. label each disc with numbers to let you know in what order to use them later. Once it is finished, place back #1 DVD into the optical drive.

  Step 5

  Physically remove the hard drive and insert the SSD drive by following the instructions below.

  1. turn off and unplug your computer, flip upside down.
  2. remove the battery.
  3. remove the access panel by removing the two screws and slide.
  4. remove the two screws that hold the hard drive carrier.
  5 remove the hard drive by lifting upward. There is a right angle SATA adapter plugged into the hard drive. This card just came out with the hard drive.
  6 disconnect the hard drive adapter and plug it on the SSD.
  7 unscrew the hard drive bracket and screw it on the SSD.
  8 put the SSD drive in the Bay, screw the support down and replace the access panel. Be sure to screw it up.
  9. replace the battery, lock.

  Step 6

  If you did not already the first recovery DVD in the optical drive, use a paper clip to open the optical drive and insert the diskette. Close the drawer, then turn on the computer to start the restoration.

  Step 7

  Select the boot drive by pressing F12 when you see the Lenovo logo during startup, and then select the optical/DVD drive in the list.

  Step 8

  Follow the instructions on the screen. The first time that I did, restoration impossible immediately, probably because of a missing partition. However, after restarting the computer by performing a battery pull, then continue to step 6 restore completed successfully.

  I have not compared this drive, but I can tell you that the Windows experience index is 7.9 and startup time is 24 seconds now. The base index is 6.8 for this system now.

  You will find that Windows has already helped TRIM. However, regular defragmentattion was still on. I think that the system restore has been disabled automatically.

  Good luck

  Matt

  I saw no option for this, and I was quite surprised, that he didn't do it automatically. I'm not an expert on everything, so what follows is a guess.

  Perhaps that if you create a partition on the SSD first, recovery will recognize and use it.

• Replacing hard drive with a smaller

  I'm fixing a friends G62 (G62-B27SA to be exact).

  It keeps failing hard drive tests so I'll replace the drive and restore the system with the recovery CD

  The current drive is a 500 GB WD Scorpio Blue.

  My question is - the recovery refuses to fill out if I replace the drive with:

  a / a 320GB Scorpio blue

  b / a 500 GB Toshiba.

  I'm not sure how limited the system of specific components.

  Hello:

  You can almost count on the fact that the recovery discs do not work on a hard drive smaller than that which was originally installed.

  I do not think that the brand of hard drive will also count as long as the size is not less than the original one.

  If you can still read all 25 characters of the product key of W7 on the Microsoft sticker on the bottom of the PC, and the recovery disks do not work, simply do your own installation of W7 media and allows to install W7 on any hard drive size/brand you want.

  Here's how...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

• Please replace the battery with the correct lenovo battery

  I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system

  buy a real battery. Press ESC to continue but the battery won't charge)

  I don't want to buy a new battery to another.

  I understand that this can be changed in the bios but don't know how.

  Now my battery is dead, and I'm unable to recharge it again.

  Ideas please

  
  

• How can I programaticaly replace one Enum with another within a cluster

  Hello

  You can do that running. This requires a change in data type, which in fact means the application tries to change its own code (i.e. itself) and which is not allowed. You can use the script to replace things, but that is an edit operation, not a runtime operation.

  You can either replace this enum with a string, or you can use several controls as you had alluded.

• replace the HDD with SDDS in pavllion HP DV7

  I have laptop HP DV7. recently my hard drive creates a few (ratllle nosie) nosie and I rebooted my system again... I didn't ERROR no bootable device - insert boot disk and press any key...

  I have googled this error and understadn the hard drive died... am outside the warranty period. I decided to replace my HDD with SDS... I don't know if I can do it?

  I got tosibha MK6461GSYN HARD drive. I would like to replace with SDDS and reinstall the OS from another software...

  Hello

  There are two parts: hardware and software. For hardware, it will take 5 to 10 minutes, but for the software that can take several hours, days or even weeks. To shorten the task of software, my suggesion: order the recovery disks on HP and put your machine into factory settings. You can continue from there.

  http://support.HP.com/us-en/document/bph07143

  Have a good weekend and good luck.

• You can replace a laptop with another keyboard?

  I have a laptop with a Spanish keyboard, but I want to replace it with an English. Can you do this and if so, how?

  www.laptopkeyboardsworld.com

  Hello

  1. What is the brand and model of the laptop?

  2. don't want to physically replace the keyboard or just change the language settings?

  If you want to change the keyboard language settings, and then follow the steps from the link provided.

  How to change your keyboard type

  http://support.Microsoft.com/kb/258824

  You can also change the language options for:

  Regional and Language Options overview

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true

  If you want to physically replace the keyboard, then you will need to contact the manufacturer for more details.