4 GB of ram on HP Mini 210-4120ea

Similar Questions

• using 4 GB of ram for hp mini 210 n2800

  If you use 4 GB of ram on hp mini 210 n2800, I would very well be number of brand and part of appreciate.

  Thank you very much for provding a solution fast, simple, direct, fix my problem.

• What the four WWAN card? -HP Mini 210-4120ea

  For a HP mini 210-4120ea, what card WWAN should I choose? The manual has 4 parts! -C' is the EU use. Is there a difference between the models or all do?

  In addition, the HP Mini 210-4120ea there a WWAN antenna installed in the screen or is this all a moot point?

  Thank you very much!

  N

  Get it and:

  No installed antennas

  No Sim Card slot

  No pcie slots to accept a card 3g

  On the positive side, it has a pcie slot which has the attatched wireless and she also supposrts Bluetoooth 4 + HS (High speed) - the atheros one

  So, not bad!

  N

• SATA 3 Support for one SSD on a HP Mini 210-4120ea

  What SATA is the HP Mini 210-4120ea is supported? the manual talks about generic SATA without any specification?

  Will be a mid-range SSD go has the size or it will use well?

  Finally, it's a record of 2.5 inches that will be replaced or a 1.8?

  Thank you very much!

  N

  You are the very welcome.

  SATA II is a 'bonus' on SATA - in particular with regard to an SSD.

  Yes, your drive SSD SATA III will work very well with the SATA II controller, but you may have been able to save a little money if you can get a SATA II SSD - and I only say that because there is no advantage in having a SATA III SSD in your laptop on a SATA II one.

  However, one day you can transfer your drive controller supports SATA III SSD SATA III on a PC.

  Paul

• maximum ram for hp mini 210 1175nr possible. There are conflicting messages: is it1gb or 2 GB?

  HP mini 210 1175NR w / Win7 (32 bit) starter.  No hardware changes.

  I am interested in increase of the stock 1 GB RAM to 2 GB.  The problem is there seems to be a lot of conflicting information about the Max RAM that this PC can handle.  Site Web of HPs indicates she has a maximum of 1 GB.  There are countless articles on other sites, claiming that it may be higher.  I know that Windows 7 Starter will recognize up to 2 GB, so that shouldn't be the ceiling?  So what - this: 1 or 2?

  Hello:

  2 GB is the maximum.

  See Chapter 1, page 2 of the memorandum on the link below.

  http://h10032.www1.HP.com/CTG/manual/c02241579.PDF

  This can be confirmed by reading the card processor directly from Intel where the 2 GB of memory is shown as being supported.

  http://ark.intel.com/products/49491/Intel-Atom-processor-N455-(512K-Cache-1_66-GHz)

  Paul

• Upgrading RAM on HP Mini 210 N2800

  Hello

  I was wondering if it was possible to upgrade to 4 GB of RAM with this netbook? Processor-say it is capable if the internet is correct .

  If it is possible, what kind of RAM it would take and would see how much improvement in speed?

  Thank you

  Ryan

  Hello:

  Who worked very well because the number of product has been on the advertising.

  You have the HP Mini 210-4014tu PC

  Link to the product sheet page:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5215163&cc=us&DLC=en&LC=en&query=A9R48PA&tool=

  OK... to answer your question... Here is the link to the service manual.

  Maximum memory is 2 GB. There is only one memory slot. See Chapter 1, page 2.  My understanding is that even if you have W7 Starter, the 2 GB works perfectly. The manual States otherwise.

  http://h10032.www1.HP.com/CTG/manual/c03163704.PDF

  Paul

• Reconnect the hard drive HP MINI 210-4120ea

  I tried to look but I can't find instructions on how to reinstall the hard drive for this particular model. Can someone give me a link or just explain it? Thanks in advance

  It will take all portable 2.5 inches wide and a SATA drive of 9 mm thick. I would like to buy mine on newegg.com.

  Choose a model to 7200 RPM. It energizes the netbook a little that can never hurt:

  For $60 you can not go wrong with this one:

  http://www.Newegg.com/product/product.aspx?item=N82E16822136279

  The hardest part with a netbook is restoring software. The best thing is to make a bootable usb flash drive with Windows on it for installation. After the back if you need some help with that.

• mini 210-1142cl RAM update

  question, is possible to upgrade RAM with a MHz higher than the computer can handle, 1333 MHz > 667 MHz?

  If so, how?

  I want to upgrade my RAM to the mini 210-1142cl from 1 GB to 2 GB,

  According to the manual, the mini can accept an upgrade to 2 GB, but it must be:

  2GB PC3 - 10600, DDR3-667 MHz, 204 pins sodimm

  Centon 2 GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm, tigerdirect, slightly cheaper.

  and now he has a black screen, and I can't start with F2, F8 or F10.

  What I did:

  1. update the BIOS to F24
  2. upgrade to Windows 7 Ultimate 64 bit, the Intel ATOM chip is 64-bit
  3. went to crucial.com for scanning of memory, and it is guaranteed to work:

  2GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm

  Is it possible to make the 1333 MHz running on the cl 210-1142 mini?

  Yes, it is possible to improve from 1 GB to 2 GB

  Thank you

  I went to centon dot com, the hp mini 210-1142cl is not on their list of supported computers.

  However, I just got a Centon support respoonse and said that part # is compatible to->

  Centon CMP1333S02048.02

  also confirmed crucial RAM

  CT1440459 part number

  Material CT25664BC1339.8FMR

• Upgrade hp mini 210-1110eq RAM to 2 GB

  Hello..
  I have a HP mini 210-1110eq with Windows 8.1 Pro (i bought the notebook with win7 starter). I have only 1 GB of RAM. I recently bought a KINGSTON 2 GB 1333 MHz RAM. I updated my BIOS for HP f24 (HP.com said this is the most recent). But when I put it in the 2 GB of RAM, the laptop does not work (I think the cooler works). Someone help me please. Thank you!

  Here are recommended by Crucial memory:

  http://www.crucial.com/USA/en/HP-mini-210-1108tu/CT5626138

  This model has caused support long thread here when he came out about the compatibility of memory. A lot of people had a lot of trouble to get 2 gigs to work right:

  http://h30434.www3.HP.com/T5/notebook-hardware/HP-mini-210-1100-1180nr-memory-upgrade-DDR3-nothing-works/TD-p/287913/page/4

  Apparently, the memory density is a problem. This means that memory black blocks how are on the chip.  Read the entire thread. Crucial offers DDR3-1600 was 8 blocks of memory, not 16 and she is at work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Can I have my HP mini 210-2080NR updated with more than 1 GB of RAM it came with?

  I have a HP mini 210-2080NR. I would really like the amount of RAM upgraded fom the he arrived with more than 1 GB. Is this possible and if so, how it will manage?

  Hello

  Yes you can, you can upgrade to 2 GB and because she has only 1 slot you have to throw 1 GB and 2 GB, put on it. I replaced the RAM for my daughter about 2 months back. He encrypted his 28 our Australian dollars and 5 minutes of my time.

  Kind regards

• HP Mini 210-4160-implementation at level of RAM

  Hello

  I bought a HP mini 210-4160 netbook and I want to move the RAM to 2 GB. On-site Polish HP ist note about this netbook and it is written that this Mini supports up to 1 GB. And here my question ist. If this is true?

  If not, how can I buy memory? I have to buy in Poland

  P.S. Sorry, my English is horrible, but I learn

  Hello:

  I think that the memory works perfectly.

  I usually use Kingston memory or critical of myself, but I think I took HP memory of factory on HP laptops which were Hynix fleas.

  More memory in the USA comes with a lifetime warranty. I wouldn't be happy only a 24 month warranty.

  Paul

• HP Mini 210 Ram?

  I just bought a HP Mini 210-2070NR and I'm a little disappointed.  I was told you can 'poor upgrade' to 2 GB of ram, but the product specifications page says this * exact version has a maximum of 1 GB.

  I wonder if that's actually true or what?  If I had 2 GB this machine would use all this?  Or should I just return the machine and follow another path?

  Thank you

  Kyle

  You can upgrade to 2 GB of memory, but at the moment, not all DDR3 memory is accepted by the new Intel N455 processor... You will need to order it from HP part Surfer... Here is the link for the same thing... http://PartSurfer.HP.com/search.aspx?SearchText=615863-001

  There is another thread in forum, where other users have been able to find a brand of memory that works closely with HP Mini 210... Here is the link for the same http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=C3C1FEA3A5CA7304

• HP Mini 210-2070NR RAM upgrade

  I bought a HP Mini 210-2070NR at Staples and wanted to upgrade the RAM to 2 GB.

  Manual says that Windows 7 Starter only supports 1 G of RAM so I've upgraded to Windows 7 Home Premium to try to support 2G of RAM.

  Went to Crucial site, put in the computer model, classified in 2G of RAM DDR3 10600 S, installed and computer won't start with 2 G of RAM in it.

  Deletion of 2G, inserted original 1 G to start the computer to the top.

  I've updated the BIOS with the latest version on the HP website.

  Someone can help me to find a solution to this, or is this netbook on only a function with 1 G of RAM?

  Thanks in advance

  Gaspasser

  You can upgrade to 2 GB of memory, but at the moment, not all DDR3 memory is accepted by the new Intel N455 processor... You will need to order it from HP part Surfer... Here is the link for the same thing... http://PartSurfer.HP.com/search.aspx?SearchText=615863-001

  There is another forum thread, where the user has been able to find particular memory sold by Crucial module which works with HP Mini 210... Here is the link for the same http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=C3C1FEA3A5CA7304

• HP Mini 210-3025 feeding issues its

  Hi all

  This is my first post here, so please forgive me if I'm posting in the wrong section/Council.

  I have a HP Mini 210-3025 AA as a Christmas gift last year of my better half, that I loved and appreciated and never encountered problems with this day (Finally, nothing that I've failed to solve anyway).

  So it's almost a year now and I use it, 2 weeks ago my better half and I went to a holiday and the laptop worked perfectly before that night, and since we were leaving for 2 weeks, I removed the battery (I usually use the laptop without the battery installed in any case, just plug it into the charger) But anyway, removed battery, external mouse and removed flash drives and put in his case.

  This morning after I got home, I tried to turn it on, connected outside the mouse, charger and pressed the power button, but no response... So I unplugged the charger (both supply and the laptop) and reconnected, still nothing; then decided to give the battery a go, which lead to the power led next to the plug of the charger flashes 3 times indicator of low battery. So I plugged in the charger, the red light and should be in charge, but the Start button / stop it turns not again, waited 20 minutes to try again, still nothing, tried with another charger, still nothing!

  Finally I let the battery charge and it was fully charged, but now he is dead yet and I can't turn it at all! Although the battery is charged!

  For a person that most people consider a "geek", I have no idea of what the exact problem is, initially I thought that it could be the power button, but when the power led blinked by pressing it stack installed earlier I ecxluded; thought it could be the charging circuit for not working after 20 minutes, but now it is fully charged, still does not!

  I tried the hard reset, but it doesn't seem to change anything

  I am a very careful person with my stuff, so nothing has been spilled on my laptop, or something like that, but now I have a major problem happening for obvious reasons! And it's a gift from my better half which means I want to return to work just because this isn't just a laptop to me!

  Any ideas/suggestions are appreciated.

  I was not sure from your post if you had been able to reset or not.  However, thank you to try my steps even if you tried this solution in the past.
  
  It is difficult to identify these kinds of questions.  However, I think that your motherboard may be at fault here.  I'll try to explain why.  Battery (seem to) load normally so we can assume that the AC adapter and the battery are in working condition.  However, even with a charged battery, you get no response from the laptop.  With other kinds of issues (bad BIOS, bad RAM, etc.), you will get a SHIFT CAPSLOCK or Numlock blinking code which indicates the problem.  If it was one of those pieces of equipment that has been loaded you would receive a different set of symptoms.  Unfortunately, I can't speculate on the cause of the failure.
  
  I think your best bet is to have the laptop repaired.  You said that you have already started the process to have the laptop repaired through HP.  It is the best option in my opinion.  Just in case where you do not have information you can directly join the HP Support at 1-800-474-6836 for the United States / Canada.  Other areas will have to visit HP's Support around the world to find their contact information.
  
  If you have any other questions, feel free to ask.  Enjoy the rest of your week

• Mini 210-1014ea: Wifi does not not on HP MINI 210-1014ea

  So I've upgraded to windows 8 last year, it was quick but then day after day, it became slow. This laptop has 2 GB of ram and a 64-bit, Intel atom N450 processor. Given that windows 8 has been slow, I have dedcided to install windows 7. So after that I installed, all drivers worked very well EXCEPT FOR MY CONNECTION WIFI. After more than a week of fighting, I tried to update my drivers and do a lot of things. But my wifi it says "no connection available. Ethernet only works. Well, I installed the latest updates in Windows update. Right now I have the latest Broadcom 802. 11 b / g network driver. Version 5.100.xxxx. I tried to uninstall the driver from Device Manager, but even then I can't search for networks wifi, infact it doesn't show all the wifi networks.

  @jass007 ,

  Hello and thanks for the display on the HP support forums.  A question when you did your installation of Windows 7, so that installing your drivers that you start first of all with the Chipset Driver.

  The reason for this, it's a bit like a traffic COP for all the other drivers on the system.  I've seen this cause of conflict with common devices and even up to the point where they are not even appear in the Device Manager.

  If you can make sure that you back up all data.

  Once this is done go to the systems support page and download all the software and drivers and save it on a USB key.

  HP Mini 210 - 1014EA PC - software & drivers

  Once it's done Windows Safe Mode startup.

  Enter SafeMode (Windows 7)

  Once you're in safe mode, that you want to remove all your drivers.  You may need to uninstall one at a time and restart between uninstalls.  Don't forget to start mode without fail every time.

  When all the drivers have been removed.  Start Windows again normally. Here, you will need to install the drivers one at a time.  Be sure to start with the Chipset Driver first.

  Please let me know how it goes for you.

  Thak you again for the display and have a great day.