4 GB system RAM shows usable 2.75

Similar Questions

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• What is the maximum system RAM for PC laptop HP Pavilion e113dx 17?

  What is the maximum system RAM for PC laptop HP Pavilion e113dx 17?

  Depending on on where I look, I seem to get contradictory information

  New HP 17 laptop AMD configurations = 12 GB max

  Crucial.com = Memory Configurator, max 8 GB

  I think the max is 12 GB (4 GB in slot 2 and the option to add a 8 GB RAM module)

  Thanks for all the help

  Hello

  The following link shows its specifications:

  http://support.HP.com/us-en/document/c04170665

  Only 8 Gb normally with two RAM slots, they have max: 2, 4, 8, 16, 32. No odd 12 GB.

  Kind regards.

• Windows 8-64 'System' process shows the constant hard disk activity

  Windows 8 system process shows a constant activity of hard disk (as shown in the resource monitor); read and write, but write.   (Lenovo T420, i7, 8 GB ram, disk full of ~ 40%).  This slows down the performance of the computer to a standstill.  No obvious reason why this should happen... nothing unusual current execution, only IE and Word + other normal stuff (files, Windows Defender history, etc.).  Can't all the time.  Seems to begin this behavior when switching users, or restart.  Can allow the computer to run for hours without solving this problem of disk write constantly.  Sometimes, but not always, the restart will also solve this problem.  Sometimes reboot seems to cause this behavior start.   Very annoying because it inhibits all operations of PC and its use.

  DELETED Comodo Internet Security.
  Restarted the computer.
  Installed Comodo Firewall ( NOT Internet Security, ONLY the firewall).
  Restart computer
  Activated Windows Defender from the center of the Action.
  Update Windows Defender online.
  Problem solved.
  If you guys are using Comodo internet security, remove and check.
  If you're not, there is probably an another 3rd party application which is the cause, probably badly tested safety related application.
  Good luck.

• After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  # Multimedia files are hardlinked.

  (141516)

• Why is my system reserved showing 6 percent fragmented?

  Why is my system reserved showing 6 percent fragmented? And I cannot degrag it, when I try to defragment it it will start then stop without saying anything. It will hurt anythingmand how do I defragment? Thank you...

  Sounds like your drive has been prepared with a Windows 7 installation disc or you've got a computer with Windows 7 installed and that you have decided to remove Windows 7 and install Windows XP.  In any case, don't bother with defragment the system reserved partition, just leave only the partition.

  John

• now my restoration of the work system - properties - show two drives C: and D: WHY? I want to only show him C: _

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  With all due respect, you are incorrect. You simply did not notice before D drive. D drive is a logical drive. To the best of my knowledge there is no way to prevent it from the show. However, simply disable the system for D drive restore.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• What is the ram max usable in each grade in my 1119tx want m6 notebook

  What is the ram max usable in each grade in my 1119tx want m6 notebook

  Hello

  It supports up to 16 GB, as noted on page #4 the third manual in the link follong

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=5344330

  Kind regards.

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How can I fix the system to show red and green colors to customize (you are looking for all colors)?

  Preium Running Windows Vista Home Edition, Service Pack 2.  Currently only display black, white, gray, yellow, blue & Brown under START - control panel - appearance & personalization - customize the colors.  How can I fix system to show "all colors".  Note: This affects all MicroSoft applications as well.

  Hi Martin,

  To provide the proper resolution, I would need more information on your side.

  1. you are trying to change the color of Windows?

  You can read the article and check if it helps.

  Change the colors on your computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/change-the-colors-on-your-computer

  Check out the link for more information.

  Customize your computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/personalizing-your-computer

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Is it better to have GB usable (at speed = 667 mhz) RAM 3.00 or 4.00 GB of RAM (with usable speed only 2.99 GB = 800 mhz?)

  Original title: RAM

  Is it better to have GB usable (at speed = 667 mhz) RAM 3.00 or 4.00 GB of RAM (with usable speed only 2.99 GB = 800 mhz?) I apologize if this sounds like a newbie question, but I'm not too familiar with that.

  3 GB sticks are 5300 and sticks of 4 GB 6400, if it matters?)

  Hello

  If you have Windows 32-bit instead of 64-bit so not all 4 GB cannot be used.

  As I said, download the 4 GB at 800.

  Rob - SpiritX

• My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any mention of this code error or failure anywhere

  My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any reference to this error code or failure anywhere, either in the "help", on Microsoft Support sites, or on the community boards.

  I have updated all drivers for this graphics card (AMD Radeon HD series 7900) and all the surrounding drivers with the AMD software.

  I can't find any information, so I don't know if I should get a new video card (which seems to work very well) or if I should just ignore it.

  Someone at - it ideas?

  Raven

  Computer Alienware Aurora R4
  Windows 7 x 64 OS
  AMD Radeon HD series 7900 graphics card

  Original title: Error Code WVC07-LB8

  Hello

  As you mentioned that you have already updated the AMD graphics card drivers, could you let us know if you see any exclaimation or any error in the device under graphics card Manager?

  Are you facing any problem with your graphics card, video, or your screen resolution?

  As Alien Autopsy Global System Tests showed you the error, I suggest you to get tap dell JDM for more support asiistance if you have any problem with Yon graphics/video card or screen resolution.

  For your information: once you uninstall your graphics card drivers, windows has its own built-in drivers that will automatically charge the generic drivers. If in case it does not load you can search the hardware changes, this will probably load the generic drivers.

• 8 GB of RAM shows that only 2.85 GB usable

  Dear team

  My 32-bit Windows 7 system shows only 2.85 GB usable out of 8 GB of RAM in the system properties. Is there a problem with my PC. Help, please.

  Monday, June 25, 2012 16:09:46 + 0000, JOBYTJOHN wrote:

  My 32-bit Windows 7 system shows only 2.85 GB usable out of 8 GB of RAM in the system properties. Is there a problem with my PC. Help, please.

  No, there is no problem, other than your lost money by buying
  more than 4 GB.

  All versions of Windows 32-bit client (XP/Vista/7 not only) have a 4GB
  address space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.
  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM. It's
  because some of the space is used by the hardware and is not available for
  operating system and applications. The amount you can use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  GB 3.1. you are a little below this average.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.
  Ken Blake, Microsoft MVP

• How to add more usable for Win 7 Professional 32 bit system RAM?

  I use a Windows 7 Professional operating system, just got my 4 GB RAM today. But after I installed it in my computer, the maximum usable RAM remained always at 1.99 GB. Isn't Windows 7 Professional can use Maximum 4 GB RAM? How should I set my system setting to increase the maximum usable RAM?

  The display of the RAM in the system of the property now's RAM: 6 GB (1.99 GB usable).
  PS. I don't know if this is relevant, but in my system, the memory of virtue setting is set to 2 GB, I have 6 GB RAM, so I don't think there's this problem...

  I use a Windows 7 Professional operating system, just got my 4 GB RAM today. But after I installed it in my computer, the maximum usable RAM remained always at 1.99 GB. Isn't Windows 7 Professional can use Maximum 4 GB RAM? How should I set my system setting to increase the maximum usable RAM?

  The display of the RAM in the system of the property now's RAM: 6 GB (1.99 GB usable).

  PS. I don't know if this is relevant, but in my system, the memory of virtue setting is set to 2 GB, I have 6 GB RAM, so I don't think there's this problem...

  If you have 6 GB of RAM, it is waste. You should not have more than 4 GB.
  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a 4 GB address space (64-bit versions can use much more). It is the theoretical upper limit beyond which you cannot go.

  
  But you can't use the whole address space. Even if you have a 4 GB address space, you can use * autour * 3. 1 GB of RAM. This is because some of the space is used by the hardware and is not available for the operating system and applications. The amount you can use varies, depending on what hardware you have installed, but can vary from as little as 2 GB to 3.5 GB. It is usually around 3.1 GB.

  
  Note that the hardware is using the address * space *, not the RAM real itself. If you have a larger amount of RAM, the rest of the RAM goes unused because there is no address to map space to.

• 4 GB of ram shows 932 usable

  I have a HP pavilion laptop windows 222tu G6 8. first I used win 7 64 bit, but the drivers were not compatible, so put on level to windows 8 pro. It has installed a system of 32-bit operating... I tried all possible measures, including the re install. I wanted to convert it to 64 bit win8. will that solve my problem or give me some ways to suggestions.

  Hi Shibinkta,

  Method 1: I suggest you try the following steps.

  1. Hold down the Windows key and press R,.
  2. Type msconfig in the run (or the search box) and press ENTER.
  3. In Windows System Configuration, click the Startup tab,
  4. Click the Advanced Options button.
  5. Take off the box "Maximum memory,"
  6. Click OK,
  7. Click on apply, then OK to exit.
  8. Restart the computer for the change to take effect.

  Method 2:
  

  Step 1:

  Updated THE system BIOS

  The problem can occur because THE system BIOS is outdated. If you have an old computer, the system may be unable to access any of the installed RAM. In this case, you must update the BIOS OF THE system to the latest version.

  To update the BIOS of your computer, visit the website of the manufacturer of your computer to download the update of the BIOS. Or contact the manufacturer of your computer for help.

  Step 2:

  Check the BIOS settings

  The problem can occur because some BIOS settings are incorrect.

  a. enable the memory remapping feature

  I suggest you to check the BIOS settings to see if the memory remapping feature is turned on. Remapping memory access Windows for more memory. You can enable the memory remapping feature in the BIOS by starting the configuration of the system. See the Guide to your computer for instructions on starting the installation of the system on your computer. The name of the memory remapping feature may be different for different hardware vendors. This may be listed as remapping memory, memory expansion, or something similar. Don't forget that your computer can not supported the memory remapping feature.

  
  Change the size of video opening AGP in BIOS settings
  I suggest you to check the BIOS settings to display the amount of memory that you allocated to AGP video opening. It's the memory that shares with the video card that is used for texture mapping and make the system. This memory would not be served by the system, because it is locked by the video card. You can adjust the size of video opening AGP in BIOS. Standard settings are "32 MB," "64 MB", "128MB" and "Auto". After you change this setting in the BIOS, restart your computer and then check the usable memory. You can test each setting to see which offers the best results.

  WARNING:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 3:

  The problem can occur because there are problems with the physical RAM installed. Then

  Step 1:

  Check if you have bad RAM memory

  To check if you encounter this problem, turn off the computer, unplug the computer, and then swap the order of the memory.

  Step 2:

  Make sure that the arrangement of memory is correct

  Refer to the User Guide for the computer to determine in what order the modules of memory must be inserted in the memory locations. The system may ask you to use specific locations when you use not all the places available. For example, the computer has four available slots. But you may need to use the slot 1 and slot 3 If you want to use only two memory modules.

  Step 3:

  Check if the memory cards spacers are used

  If you use a pimple card memory to contain several modules of memory on the computer, the system may require specific configurations for this scenario. Therefore, usable memory may be less than expected.

  Also check out the link:

  http://msdn.Microsoft.com/en-us/library/aa366778%28VS.85%29.aspx#physical_memory_limits_windows_8

  It will be useful. For any other Windows questions feel free to get back to us. We will be happy to help you.