430SL HP G61: Touchpad Synaptics scrolling problems Windows 10
Hello guys, I've upgraded to Windows 10, but I have problems with scrolling touchpad Synpatics.
Drivers that are now 19.0.12.95
What can I do?
Resolved, follow this guide: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Synaptics-Touchpad-Will-not-Scroll-in-Windows-10/td-p/5242295
Tags: Notebooks
Similar Questions
-
Reference Dell touchpad doesn't scroll in Windows 10 - Inspiron 11 3137
Updated my Inspiron 11 3137 to 10 Windows by doing a clean install. I installed all the drivers from the Dell Support site for Windows 10 x 64, including the v19.0.15.2 Dell Touchpad Driver (A00) listed. I configured the touchpad settings as I had them in the previous OS - with 2 fingers of active scroll. It worked fine, but now has problems to win 10.
Win 10, scrolling works fine in Google Chrome and Nitro pdf reader only (I've tested, at least). In Internet Explorer, and all of the 'modern' aka 'Metro' apps, scrolling does not work. When I scroll gesture, a small roll of type icon appears but nothing happens (see attached photo). I tried to reset the touchpad settings and I tried to uninstall / reinstall the driver, without success.
Suggestions?
Thank you!
In case anyone else has this problem, I solved it by installing the driver for the Touchpad of Dell for Windows 8.1. Now, all scrolls, including Windows 10 apps and Internet Explorer.
The version that works is v17.0.9.23 (A03) and is listed under 8.1 WIndows drivers.
-
Satellite P200 - touchpad Synaptics PS/2 and Win10
I hope someone can help here.
I have a Satellite P200 - 17 c, which I've updated to windows 10, overall, the laptop works like a dream except for a very annoying problem.
My touchpad works but I can't seem to get the scroll button to work at all.
I lost count of the ive solutions that have failed to make a difference try.does anyone have an idea what I can do to make this work?
Ive been wondering if there is a newer laptop / still supported using the same touchpad as my 17 c whose drivers will work correctly in windows 10.any help will be greatly appreciated.
Thank you
Go to control panel and uninstall the driver of the Touchpad (Synaptics, Alps, momentum).
Then run Windows Update to install an update to the touchpad. -
How can I change the sensitivity of the touchpad on my laptop Windows 8 Samsung series 3?
I can't find a setting that allows me to adjust the touchpad sensitivity. I can pinch to zoom in with ease, but I can't two fingers scrolling unless I dig my nails into the protector with strength. And, even then, it works sometimes.
Settings-> Imput gives me only option to turn the touchpad on or off.Control Panel-> hardware and sound-> Synaptics TouchPad V7.5 gives me options to set the speed and to turn on or off certain functions of drag.Control Panel-> currencies and printers-> mouse gives me left - and right handed options, double-click speed options, pointer options, wheel (which does not have this computer) options, etc.Where else is there to look at? Help! Thank you! :)Hi Michelle,
I suggest you to refer to the many suggestions in the article.
How can I change the settings for my touchpad of Windows 8? Scroll and click on the problems.
You can also consult the "Resolution" section of the problems with your touchpad when you click on 'more' in the article.
Mouse, touchpad and keyboard with Windows problems
Note: It also applies to Windows 8.
Hope this information helps.
-
IdeaPad Z580 trouble with smart touchpad after upgrade of Windows 8
I own a Z580 Ideapad and upgraded to Windows 8 yesterday. I noticed that the smart touchpad stopped working after the upgrade. I installed the correct driver, Synaptics Touchpad Driver for Microsoft Windows 8 (32-bit, 64-bit) - IdeaPad Z380/Z480/Z580, hoping that it would work, but nothing helped. I also tried to reinstall/overwrite my existing 64-bit driver when prompted by my system to do so.
Scrolling, pinch and side scrolling don't work at all. It is quite frustrating. Help, please.
Hey guys lenovo recommends a clean install of windows on machines pad idea 8
read this:
http://download.Lenovo.com/Lenovo/content/Windows8/upgrade/IdeaPad/index_en.html
And can get all the drivers for lenovo China site... use chrome to translate the page
-
Two problems have been caused with my HP Split 2 x since I bought it 2 months ago:
(1) the touchpad works sometimes for a few seconds, while the touchscreen still work OK.
(2) the computer becomes slow after a while of use (which varies from a few minutes to a few hours usually). The Task Manager shows 98%-99% of memory, most of which use (3.6 GB / 4 GB) are not paged memory.
I suspect the two issues are related to a faulty Synaptics driver, according to:
and http://forum.notebookreview.com/razer/731374-memory-leak-synaptics-driver.html .
I did the same test as the second link with the same result: Open "Task Manager" (Ctrl-Shift-Esc), on the 'Performance' tab, select 'memory '. Note the value for "Non paged memory. If I move the touchpad, it increases to about 1 MB every 5 seconds. If I stop moving, the value remains constant.
I use the preinstalled Synaptics driver, version 17.0.10.9 (Sep 06, 2013) for 64-bit 8.1 window.
Everyone has the same problem, or use it without these issues?
I would like to know if a restoration system or factory reset may fix.
FINALLY!
Microsoft has just released an update for Synaptics Driver, not thanks to HP which has not found a way to provide the possible Synaptics driver as an OEM update.
Update Windows Update to Sypatics HD TouchPad two days ago, but I would not be allowed to install as it kept then mainly in giving the 800F0100 error Code. After some research on the Internet I could find that an installation manual after the WU has downloaded the driver would be possible.
So I went to the Device Manager > mice and other pointing devices > TouchPad Synaptics HID > properties > driver > Update Driver > Browse my computer for driver software and shown the finger/windows/C:\Windows\SoftwareDistribution/Download and everything worked like a charm = D
I have no more memory leak and now after SEVEN MONTHS I finally can use gestures that it was supposed to.
But I still annoyed gel problems which in my case is a dysfunction between the screen and the dock.
Just that you wanted the guys at Microsoft to know is the solution, not the HP that would have had if they have signed and put the driver since November last at our disposal. Blame it on you, HP.
Leo
-
Hi I have an acer aspire V3 series laptop PC with windows 7. log in my touchad stopped working after connecting a usb mouse. Even after the mouse is disconnected and restarted, the problem remains. Other functions of touchpad are very good except the scrolling. Check the properties of the touchpad. everything is fine, the scrolling is enabled. could someone please advice? Thank you.
Hello
The drivers for the touchpad can be damaged, which could result in a malfunction.
I recommend the following methods and check if that helps.
Method 1: Run the hardware and devices troubleshooter.
It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
See the article below.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter
If the problem persists, update us the touchpad drivers and check if it helps.
Method 2: Update drivers for the touchpad in Device Manager.
(a) press the Windows key + R, type devmgmt.msc.
(b) to expand mice and other pointing devices.
(c) click on properties, click the driver tab.
(d) click the Update Driver button.
(e) click on the OK button.
See also section below.
Mouse, touchpad and keyboard with Windows problems
If the problem persists, feel free to post. We're here to help.
-
Why the content of auto-scroll in Windows Explorer when you double-click an element?
Why content (columns) to auto-scroll in Windows Explorer (on the left) when you double-click an element? And how can you stop that?
How to reproduce:
-Open a Windows Explorer window
-Big enough to be able to see the columns 2 and 3
Double click on an element of the extreme right or the last column
-All content automatically scrolls to the left so that the column of the element double you clicked is now in the first column of the windowIt is REALLY BORING because it causes bad clicks when it scrolls or to always click 4 times to open a folder or a file if it is located on the far right or the last column.
How do we turn off this horrible Windows 7 'development '?
Hi tom1138,
You may need to reset all settings to default folder view in Windows 7 by following the steps:1. open the Start Menu, type regedit in the search line and press ENTER.
2. If prompted by UAC, click Yes.
3. in regedit, expand keys (folders) in the left pane to:
Settings\Software\Microsoft\Windows\Shell HKEY_CURRENT_USER4. in the left pane, click with the right button on the BagMRU key and click on delete.
5. click Yes to delete.
6. in the left pane, click with the right button on the bags key and click on delete.
7. click Yes to delete.
8. in regedit, expand keys (folders) in the left pane to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell9. in the left pane, click with the right button on the BagMRU key and click on delete.
10. click Yes to delete.
11. in the left pane, click with the right button on the bags key and click on delete.
12. click Yes to delete.
13. close regedit.
14 close the session and log on or restart the computer to apply.
EDITING REGISTRY WARNING:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756Aziz Nadeem - Microsoft Support
-
I have the scrolling problem in netbeans IDE in my macBook pro early 2015 (retina 13 inches), somewhere that is extremely fast cannot see what is happening and in a place more slowly scrolling and not able to fix by increase or decrease scrolling speed of the trackpad in
sys.pref-> accessibility.
Everyone please help.
-
Touchpad / trackpad drivers for Windows 7 64 Home Premium on HP Pavilion dv2620us
Touchpad / trackpad drivers for Windows 7 64 Home Premium on HP Pavilion dv2620us
is there a driver? I see that others have been found. Thanks for your help
See if this driver works better.
-
How to disable the touchpad synaptics on a HP Pavilion permanently?
Sorry, it has not worked for you. We just let the computer tech and could watch what he was doing. At the same time, we could see thelong URL I provided was twice on the scrn. Not being sure if WE had to do something or not I asked. He said he would change something in the BIOS. As far as I know that is all what he did to his end on our computer worked... and I am so happy!
Things were so easily!
-
No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
On the top of this page for answers click v (English) in the United States and set on your tongue.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings
HelloIf you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042cI hope this helps you.Brian -
I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012
display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings
thanx
Hello
The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
due to an unidentified problem, windows cannot display windows firewall settings
I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings
Any ideas on how to solve this problem?
"Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
Start > run regsvr32 hnetcfg.dll [Enter]
MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
SUPERantispyware blocked by a file of Firefox. Spyware company won't help.
I had Superantispyware free for many years. The difficulty for the first time. The complete search of the computer stops at C:USERS\IAN\APPDATA\LOCAL\MOZILLA\FIREFOX\PROFILES\7CHPA2BY. DEFAULT\CACHE2\ENTRIES at least 10 attempts ceased at this point
-
How can I reset my BIOS password on my computer hp G62 laptop?
Please note that I tried the 'normal' procedure or standard used to reset my BIOS password and I noticed in many other positions, this computer (laptop G62) maintains its BIOS data even after removing the battery from the room. I also tried to short
-
Printers HP Envy 5660: default printer of ink settinga
I've just set up a new printer HP Envy 5660. The default ink setting is color. I want the setting of default to be black ink. How do I do that?
-
Addition of keystrokes to a make a chain of 7 digits for a barcode
I am kind again with this type of LabVIEW as I've especially done entries DAC instead of the keyboard. I have a bar code reader that scans the 7 digits. I tried the keyboard aquire, but it does not zip by the very quick keys and shows only a single k
-
upgrade from my other computer