4351 NI NI DAQ traditional for Vista deploy on RT

Similar Questions

• DAQ traditional Windows 7 (x 64)

  I changed to Windows 7 (x 64) of Windows XP, with a new PC (need more memory). I am programming for a PXI with LabVIEW Real - Time 2009 SP1 system. There is a map of temperature traditional DAQ running inside the PXI chassis. I read somewhere that traditional DAQ is not longer supported by NEITHER. In fact, the installer to update driver 7.5 Beta displays an error message on Windows 7 (x 64).

  I don't want to run Trad. Acquisition of data under Windows but on LabVIEW 2009 real-time. I have it takes rather to programming on my Windows host. Is there no alternative to the use of Windows XP?

  I think that it is not possible to use an in general for a NI 4351 DAQmx driver.

  For example, in the file Readme of NOR-DAQmx 8.0.1, I found the following information:

  Devices limited to NOR-DAQ traditional (old)

  
  

  NOR-DAQmx does not support the following devices. The following devices are supported only in NOR-DAQ traditional (old):

  ....

  Dataloggers for NI 4350/4351

• NOR-DAQ traditional (old) devices of measurement and automation explore 4.7 with LabView2010 under Windows 7.

  In measurement and Automation Explorer 4.7, with LabView2010 in Windows 7, peripheral OR-DAQ traditional (old) appears under devices and Interfaces and it allows me to create a chassis SCXI-1000, and she agrees "Reset for NOR-traditional DAQ.  However, it does not search the modules in the SCXI1000, and when I ask 'trial', he says 'Impossible to test the chassis at this time.'  The entrance of NOR-DAQmx devices for the SCXI-1000 chassis has no problem and detects the modules very well.  I need the Legacy DAQ to a popular former teaching tool that has no equivalent in NOR-DAQmx.

  Unfortunately, NEITHER-DQA traditional (old) for Windows Vista and 7 functions of the only driver on Windows 7 32-bit, as seen on the page of the driver at the end of paragraph 1 Solution. I recommend you move your program to DAQmx.

• PCIe-653 x with DAQ traditional

  Hello

  We want to update some of our network using a PCIe-6536. Is it possible to run this card with traditional NIDAQ?

  Does anyone have experience with the PCIe-653 x with DAQ traditional. Or is it only possible to run this card with DAQmx?

  Greetings

  Oliver

  Hi Oliver,.

  PCIe cards not are usually not supported by the old traditional DAQ driver.

  In any case, you should consider updating your application to DAQmx as TRANS. data acquisition support is quite limited (see also the official statement of OR below)

  "Caveat ".  NOR-traditional DAQ
  (Legacy) is an older driver with the obsolete application programming
  interfaces
  (API) for the development of acquisition data, instrumentation and control
  requests for former of National Instruments DAQ devices. You must use
  NOR-DAQ traditional (old) that in some circumstances. Refer to the
  File Readme of NOR-DAQ for a glimpse of the two API NOR-DAQ, the
  benefits of
  NOR-DAQmx and more information about when to use NOR-traditional DAQ
  (Legacy)
  including a complete list of devices supported, operating systems,
  application
  versions of the software and the language versions. You can install the most recent
  version of
  NOR-DAQmx software, available at ni.com/downloads.
  "

  Kind regards
  Bernd

• MAX does not recognize NOR-DAQ traditional (old) devices * HELP

  I have a card PCIe-6259.  I want to use blocks of input-output in my program .vi (read Port DIO-DIO Port writing reading Digital Line), so I installed the version of NOR-DAQ traditional (old) devices 7.4.4.   But when I got to MAX (measures & Automation) and look on the left side under devices and Interfaces, I do not see the Tradional-NOR-DAQ tab; I see only the devices NOR-DAQ-mx, PXI, series and parallel system.

  Then when I go to run my program I get the error: error-10401 took place in a DIO Port Config Possible reason (s): NOR-DAQ LV: the specified device is not a product of National Instruments, the driver does not support the device (for example, the pilot exited until the device has been supported), or the device has not been configured using the Explorer Measurement & Automation.

  So, how do MAX to recognize that I have installed NOR-DAQ traditional (old) 7.4.4?

  Thanks for the reply!  I realized this too after going through the files for example... but thanks for the confirmation.

• Conversion of a VI that uses OR-DAQ traditional to NOR-DAQmx

  Hello

  I'm trying to convert a VI that uses OR-DAQ traditional to NOR-DAQmx.  I'm almost there, but when I run my new rear version number 'read' and 'scan' are not the same.

  In the original version the "number read" always came back as 1 and "scan" backlog is always returned as 0.

  In the new version, "number readings" and "rear scan" could come back with any value.  It's sure to shake my recording of measures and VI the interaction with the rest of the program.

  I have attached a light version of the VI for the old OR-DAQ traditional and new OR-DAQmx that illustrate this problem.  The two VI is written in LabVIEW 2011 SP1.  I would be willing to upgrade to SP1 2013 LabVIEW if it would help solve the problem.

  I would be grateful for any guidance.

  Thank you in advance.

  I think I did.  Use-1 to erase everything in the buffer when the program is waiting for the countdown to the end and then just ask for 1000 measurements when the countdown reaches 0.  Do not need the Scan back or number reading.  Also don't need to add the measure in table 1 at a time because I get them all at once.

  I enclose a copy of my solution for all those who might need to do something similar in the future.

  Gary

• Need help to convert DAQ traditional subvis DAQmx configuration

  I need to convert these screws (of NOR-traditional DAQ) to be used with a new data acquisition card that supports only NI-DAQmx.

  Please help me in this...

  Can I use the same traditional NI DAQ VIs with the NI PCI-6221?  If so, how? This device can be configured for NI DAQ traditional?

  NOR has several resources to help move tradtional DAQ DAQmx. A good place to start is the getting started page. There is a tutorial on how to transition. There is also the compatibility screws which replace certain traditional DAQ functions with wrappers around functions DAQmx. The DAQ example you posted is pretty trivial and really shouldn't take a lot of time to convert once you get a basic understanding of the DAQmx.

• NOR-DAQ traditional vi not found in NOR-DAQmx

  Hello. We hope to control a detector via NI PCI-6533 (DIO-32HS). Our colleagues have implemented control programs in BT 7.1 to 7.3 of NOR-DAQ traditional. Now when we opened their programs on a PC installed with LV 8.6 and NOR-DAQmx 8.9, many vi was not located, including "DIO config.vi", "DIO wait.vi", "DIO clear.vi", "DIO read.vi", "Reset.vi Device", etc. We realized that they were supposed to come from vi.lib\daq\digital.llb and a few other .llb in the same folder. Apparently vi.llb\daq was installed by the traditional DAQ.

  We do not believe there is compatible with LV 8.6 traditional DAQ, which means that we need to replace those 'DIO *.vi' or 'Device reset.vi' with their counterparts DAQmx.  Could someone shed some light on how we should start working on that?

  Thank you very much.

  Xiaolan,

  Indeed, there is a traditional DAQ driver for LV 8.6. The installation can be found here.  I hope this helps.

• Satellite L20 - drivers for Vista available?

  Hello

  I use Satellite L20 with Windows XP. Now, I want to improve my OS to Vista/Windows 7. I've seen several people have not found drivers for L20. If I install vista on my L20 (PSL2XL-01R007), the drivers will be available?

  Please help me.

  Thank you.

  Hello

  > Now I want to upgrade my OS to Vista/Windows 7
  You want to upgrade to Vista * or * Windows 7?

  > I've seen several people have not found drivers for L20
  I think that it s depending on whether Toshiba provides drivers for Vista or Windows 7 for Satellite L20. These drivers are usually placed on the official page to download driver of Toshiba.
  Satellite L20 PSL2XL seems to be an Asian model, so I checked the Toshiba Asia page, but there are just available Windows XP drivers. The European page also shows only XP drivers :(

  This means that only XP is supported, but you can try to get all the drivers yourself on external pages. Probably, you will find all the drivers you need. Here are some pages where you can perform a search:
  [www.intel.com]
  [www.realtek.com]
  http://APS2.toshiba-tro.de/WLAN/

  Good luck! :)

• Re: Satellite A300-1 b 9 - cannot install updates for Vista and IE8

  Hello

  I have a Toshiba Satellite A300 1 9 b I bought 9 months ago. It has Vista Home Premium 32 bit SP1. I have serious problems with the updates:

  1 Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 - I can't install this for the last two months. Whenever it appears that the installation has failed.

  2 security Update for Windows Vista (KB961501) can be installed as well

  3. my Internet Explorer 8 does not work for the past two weeks. I tried to download it and when I did, then, my computer does not restart. I had to use sans-echec Mode, uninstall IE8 to return to Normal Mode

  4. I also tried to download and install SP2 for Vista, but it failed.

  I am very worried. Please suggest me what I should do.

  Thanks for your help.
  Stéphane

  I think that the decision of the antivirus program is a personal opinion

  I put t like McAfee and Norton because they need a lot of system resources and do a slower computer.
  I prefer AntiVir and Kaspersky Security suite. The two programs have good scan engine and don t need a lot of system resources. They are easy to use to use it.
  AntiVir is free but it s just an antivirus. Kaspersky Security suite also contains a firewall, antispam filter and more.

  It s your choice what program you are using. ;)

• InPro Comm IPN2220 Wireless LAN Card - need driver for Vista OS

  Hello

  I'm new to the Forum and I think that it is just the place to get answers to my questions?

  OK, I use the laptop Toshiba Equium L10 and I just downloaded and installed the "public" version of Microsoft Windows VISTA beta 2.
  The installation went very well and it took about 40 minutes and considering that it is only a 1.50 GHz Celeron (M), which was very good, but I'm having problems to make a software/driver for my '' integrated '' InPro Comm IPN2220 Wireless LAN Card, so for now, I can not connect to the internet on this subject. (On the bottom of the laptop, it has ' FOXCONN T60N871 802.11 b/g W/LAN Card "which I think is the real name for 'InPro Comm IPN2220 Wireless LAN Card'.)

  I installed the software/driver LAN wireless from the utility CD, and although the software seems to be no problem, Windows does not detect the card and does not install the driver for it. I also tried Win Vista update, but nothing is found.

  Does anyone know ho to get the software/driver to install properly so that Windows Vista can detect the card and install the driver and software?

  If not, does anyone know of a driver updated for VISTA BETA2?

  I would really like to keep Vista Beta2 on my L10 so if anyone has some tips that will get my built-in wireless card works, I would be very grateful. (BTW, I don't have a 'wired LAN').

  Concerning

  Hello

  These days, a lot of users wrote vista and their experiences with the installation. As you know that officially there are no drivers available. I think that Toshiba will offer all the drivers at the point where vista is officially on the market.

  You can post on this tread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13771 maybe Brave will give you more information about the installation on its L10.

• Satellite P300d 10v - found some drivers for Vista

  Hello!!!

  My laptop is Satellite P300d 10v and I coud not found some drivers for vista!
  I look in the page drivers toshiba and a find some drivers as a some other display drivers driver Bluetooth!
  When a driver install package value my easy touch keys does not work!
  Also a woona install win xp instead of vista, but a cant find any drivers for this laptop (p300d 10v) sata!

  Sews enyone had the same problem?

  Help, please!

  Thnx!

  Hello!

  If he chooses the compatibility, he will lose a little performance. So, it's not a good idea ;)

  The best way is to load the SATA drivers. It can also create a clean Windows disk with nLite.
  http://www.nliteos.com/

  Good bye

• Satellite P100: Need 5 in 1 card reader driver for Vista 64 bit

  I am not able to operate the card reader internal of my Satellite P100 with Vista 64 bit, it seems that in the download section, it has the drivers for Vista 32-bit, with tips for using the flashcard with vista 64?

  Tom

  Hello

  Try this driver Toshiba

  [2.0.0.7 | http://195.182.196.27/TIFMv2007.zip]

  I hope this will help you

• TEMPRO does not work for Vista Ultimate x 64

  Hello

  I have a Qosmio F50 - 10K and I installed Vista ultimate x 64 and the Tempro application does not work. After I installed, I left the start Tempro button checked and when I press finish it gives me this error:
  "internal error 2753.
  Toshiba.UI.controlpanelapplication.exe ".

  Same thing happens when I uncheck the box with start tempro.

  In both cases, nothing is left in the system, no files, no regstry, nothing.

  Help, please

  Thank you

  Hello!

  I searched on the Toshiba driver download page and I discovered, Tempro is available for Vista 32 bit and not 64 bit.

  I think so Tempro will not work on a 64 bit OS.

  Bye!

• Where to find TEMPRO for Vista x 64

  Hello

  Can you tell me if there's a TEMPRO for Vista x 64?
  I installed 1.2 Tempro, and when it's done an error appears on the control panel.

  Thank you

  Could you post the error message?
  Perhaps it would be useful.

  But as far as I know that one Tempro tool can be downloaded from the Toshiba page and I guess that it was designed for 32 bit OS.