4380 all-in-one printer does not detect the print cartridge
My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.
I'm sorry you have a problem with your ink not detected.
The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.
For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.
Tags: HP Desktops
Similar Questions
-
All-in-one software does not provide the option of wireless connection
I have improved my all-in-one software on my HP laptop, but when he asked how to set up the connection, there is no option for a wireless connection. There were 2 options: usb cable and ethernet cable. I chose the ethernet cable, but it does not work. Prior to this level and even now, I can print to the wireless laptop, but I can't scan.
My configuration is:
OK, be sure to restart and do a Windows update after you HAVE uninstalled the HP software. Then install from the link 'Support & drivers' at the top of this page.
-
HP Photosmart 5520 does not detect the installed cartridges
Hello world
My operating system is Windows Vista
The error message for all cartridges installed even when installation and matching color on the printer, it is "the following cartridges appear to be missing.
This is a new printer and I never got past this stage on this printer.
Thanks in advance
Craig Baker
Hello Craig,.
I noticed your message on the error message you see on your Photosmart 5520. I'm not sure if you have solved your problem yet, otherwise, I would like to post a link below for you to solve this problem.
If you are still having the same problem when you have completed the steps, I recommend you call HP Technical Support to inquire about a replacement printer.
http://support.HP.com/us-en/document/c03262515
Contact information for HP: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Good luck -
Windows xp64 does not detect the printer hp laserjet p1102
Hello
Windows XP Professional X 64 Edition Version 2003 is installed on my server. It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001. When I connect my printer, Windows does not detect the printer. I lost the CD for the printer. When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.
Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.
Hello
I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads
-
Does not detect the hdmi cable more (very specific scenario)
Well then...
Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).
So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...
Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.
Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.
The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.
During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.
Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.
Hello Kaida W,.
Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:
Reset the management system (SCM) controller on your Mac.
Try it and tell us how it goes. The entire community is here to help.
Best regards-
-
Qosmio G50 does not detect the connected Bluetooth devices
The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.I did a test to see if it could depend on the PC or the mouse.
I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
And the phone does not detect the qosmio via bluetooth.What checks can I make on the qosmio while ' I detect devices via bluetooth?
Tank you
Hello
BT has been successfully activated on tis G50?
Have you used the FN + F8 key secret to switch on the BlueTooth?Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.
-
Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.
What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?
What model number is the most convenient airport?
Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.
In addition, not all drives are recognized.
The internal drive of the TC must be recognized, but there could be problems as well according to the age.
-
Computer does not detect the pci card
Hello
I have a dell dimension 4550 pc, with windows xp professional service pack 3.I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.
What can I do to make the computer detect the new card?
Thank you
It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!
-
I received the error message to the Windows startup, that I need to replace my Hal.DLL file. I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...
Any help would be appreciated!
Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:
If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.
MS - MVP - Elephant Boy computers - don't panic!
-
BIOS Inspiron 2305 does not detect the drive in ahci mode
The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.
The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.
However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.
Can someone tell me what steps to take to do the installation?
theFlash1932 and natacuk4
Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!
I was able to boot the system several times and it seems that everything works fine.
Thank you guys for helping me solve this problem!
-
HP Support Assistant on my laptop or desktop does not detect the other machine.
HP Support Assistant on my desktop or my laptop does not detect the other machine. They are both on the same network. Both are HP machines. Both are running Windows 10. Is normal. I would like to kind of monitor my desktop with my laptop when I'm away from home.
The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
-
Qosmio F10: Driver Installation does not detect the wireless network card
I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.
Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.
I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.
I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...
I still don't the card wireless not yet installed. This happened to someone else?
I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...
Thank you very much
Sean
Hello
you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.
Sorry I have no other idea.
Good bye
-
IdeaPad Y500 does not detect the camera
Hello everyone!
I had my Y500 for about 1.5 years and I can't use the camera more. The computer does not detect the camera and when I downloaded and installed the camera software the computer shows me "no approperiate driver to install! I tried to uninstall the camera driver and reinstall it again, but it's the same problem.
I would appreciate a quick response
The problem was with the camera and the camera cable. I sent my computer to
Lenovo and they fixed. -
X 220 does not detect the wwan card
My X 220 does not detect the wwan card ("WWAN MSC PRTSWWAN RDY FUL" in the parts list). No section of modem in Device Manager, without any question related to the wwan card. Please someone help me, how to make my OS (Win 7 Pro x 64) can detect the wwan card?
1.17 BIOS can detect, it worked normally.
-
The Digital Persona does not detect the fingerprint reader in Windows 7
I have upgraded from Vista to Windows 7 Pro (full installation). Now, DigitalPersona does not detect the fingerprint reader. I tried to uninstall and reinstall the driver and the program, does not. Any ideas?
Hi Cankermechanic,
I suggest that you try to update the drivers supplied by Device Manager and check.
See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
If the problem persists, I would recommend that you uninstall drivers and reinstall the drivers from the site Web of Digital Persona, if that is helpful.
If the problem persists, I suggest that visit you the manufacturer for further assistance from the link below:
http://www.askpersona.com/I also recommend that you contact the manufacturer of the computer for further assistance on this issue.
Thank you, and in what concerns:
Swathi B - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I have a Y480 and I would like to add an mSATA SSD. According to the 128 GB of Crucial m4 mSATA reader is not compatible with the Y480: http://www.crucial.com/store/partspecs.aspx?IModule=CT128M4SSD3 I also watched the 80 GB drive mSATA Intel: http:/
-
can I connect to tv monitor acer HDMI
MY friend has your desktop Acer S series with monitor. Desktop does not have HDMI connections, but monitor does. Have a monitor connected to the TV with a HDmi cable and got nothing. If it works or not? Appreciate any help you can give Wiseowl
-
Changes to the view of a console file
In Disk Defragmenter, the 'File - Options' menu item opens a window with a tab "Disk Cleanup". On this tab, it says: "the changes to the view of a console file are saved in your profile." What is a file "system"? What 'past to view' this qualifies? F
-
Scanner Photosmart Premium C310a for error on Windows 7 64 bit
Hi all I bought a HP Photosmart Premium C310a this weekend. Everything works fine except the scan. This is what the problem is: When I try to scan (through the centre of solutions) I get an error message as soon as scanning starts software (hpiscnapp
-
Photosmart C4480 - error opening door
My printer is not working due to error 'door open '. I tried to restart the printer, change the cartridges; I tried to restart the spooler to print via the control panel (such as suggested for a different model). I can't find other solutions to try.