4402 wireless Controller - Source of IP Communications - what is - this?

Similar Questions

• Helps to configure a Cisco 4402 wireless controller

  Hello

  I need help setting up a Cisco 4402 Wireless Controller. I want to have users automatically connect to the wireless network, but not to have access to all the resources network until they open a web browser and provide their domain user name and password or a guest account provided by the receptionist.

  I tried many different configurations but can't seem to make it work properly. More time then not when I put on the WIFI network security it causes my wireless network to disappear from the list of wireless avaialbe.

  Here's my network configures:

  1 - 4402 wireless LAN Controller

  2 - Aironet 1130AG antennas

  1 - 5510 cisco ASA

  1 - 4503 core Router\Switch

  8-2960G switches

  Windows domain Server 2003 with RADIUS running on the domain controller.

  Thanks in advance for the help.

  Glad you got it working...

• LAN 4402 wireless controller

  Is it possible to config only 1 GB to 4402 controller LAN connection. Or should I use two connectors Go?

  Because I have only 1 GB free on my switch port.

  Hi René,.

  You can use the port that a single concert for you to connect to the switch. 2 ports can be used if you want por tchannel switch and you want your controller to work with a LAG.

  But you can simply connect 1 port switch to the controller and configuring manamenet and interface ap - manager link to a physical port depending on what you are using.

  HTH

  Ankur

  * Pls note all the useful message

• 4402 wireless controller and the 1130AG access points

  I have a bunch of 1130AG (35) and 1231 points of access. I just bought a controller 4402 so I could handle these much easier access points. I currently have the offline access points, so I could control. With the wireless in the mix controller, that I have to fix these to light mode or can I leave them offline.

  We know not the operating instructions so I can leave them in stand-alone mode. Most of them is in the rafters in our warehuse, and I didn't have to pull of these if I have to. If I can use them offline, how can I do that?

  Thanks much for any info!

  Dave

  Hi Dave,.

  A WLC manages autonomous APs.
  So if you want to centralize the management of your APs through the WLC, you will need to convert it to light and enter them on the WLC.

  To convert the lightweight access points, you can choose between several options:

  1. thanks to a specific upgrade tool that you could install on a PC:
  http://www.Cisco.com/en/us/partner/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html

  2. [the most evolutionary] by WCS, with a model of migration that could apply to several APs:
  http://www.Cisco.com/en/us/docs/wireless/WCS/7.0/Configuration/Guide/7_0apcfg.html#wp1054876

  3. [not in any book] by the following steps:
  3 (a) download the CEC lwapp recovery image and store it on a TFTP server.
  3 (b) Telnet to the stand-alone PA and issuing the following command:
  Archive Download-sw / overwrite/reload tftp: / // [lwapp recovery image file path]

  As a general recommendation, before to convert the lightweight access points, you can be sure that the wired infrastructure behind is ready to direct them to the WLC for recording.
  It's suggestions explained in the link on the above option #1.

  Hope this helps,

  Fede

  --
  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• The Xbox 360 wireless controller works with PC, or what I have to buy the Xbox 360 Wireless for windows?

  I want to know if the wireless Xbox 360 controller will work with a PC if I just buy the receiver, or I have to buy the real Xbox 360 controller for windows to work?  Because I just bought the receiver only and installed, but when I try to connect it to the controller the controller just flashes and never connects.  Which leads me to believe that there is something different with the Xbox controller for windows.  Please let me know.  Thank you.

  Straight from this follow-up to the letter...

  1. open Control Panel
  2. open 'display devices and printers '.
  3. right click on 'unknown device '.
  4. click on properties
  5. click on hardware
  6. click on properties
  7. click on change settings
  8. click on the driver
  9. click on set to update driver
  10. click on "Browse my computer for driver software".
  11. click on "Let Me pick from a list of drivers for devices on my computer.
  12 double-click on Microsoft common controllers
  13. click twice on "receiver wireless Xbox 360 for Windows Version: 2.1.0.1349 [2009-08-13].
  (or click on the latest version of the wireless receiver driver)
  14. click on Yes
  14. use the connection on the receiver and controller to connect and enjoy

• Upgrade of Cisco Wireless Controller 4402

  We have a 4402 WLAN controller with a bunch of AP in 6 locations. The software is installed on a Windows Server 2003 server - since our society must be in accordance with various compliance agencies, we are in the process of getting rid of all 2003 servers in our infrastructure as they will be supported are more early next year.

  I created a new server (2012 R2) and tried to install, but get the error that it is only supported on Server 2003 or Red Hat.

  Is there a way to get this installed on one different platform other than 2003?

  Thank you!

  Yes, you can keep the same equipment (WLCs and AP).

  I was just saying about upgradation WCS to the CNS / prime infrastructure

  NCC/WCS are just a management for wireless LAN controllers APs. so if you change the WCS to the CNS, then it will affect any service.

  Concerning

  Remember messages useful rates

• Applications Windows does not detect my wireless controller

  Windows applications (windows store games) does not detect my speedlinkxeox wireless controller pro, earning 8.1 and win 10, but it works perfectly fine on pc games. Tried many games. Yes with the receiver. Is there a work around for this problem, I have the drivers installed too.

  Hello sunny

  Thanks for posting your query on the Microsoft Community.

  You can deal with this issue because of a corruption in Windows applications.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. You receive no error message / error code on your system?

  I suggest you to follow the below methods and check.

  Method 1: modern convenience store app.

  The modern convenience of the app store is built in the Troubleshoot utility which can detect and automatically correct most of the errors of the app. So, I suggest you to download and run the troubleshooter modern app to fix application errors.

  You can download it here:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  If the problem persists, try Method 2.

  Method 2: I suggest you to follow the steps described in the article below and check.

  Solve problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Controller network & pci simple communications controller driver missing

  Hello

  I just reinstalled my HP g42 360 TX laptop.

  Operating system: windows 7

  driver network controller and PCI simple communications controller driver are not installed and the wifi does not work

  Here the hardware ID

  network controller:

   

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  PCI simple communication controller:

   

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C & REV_06
  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C
  PCI\VEN_8086 & DEV_3B64 & CC_078000
  PCI\VEN_8086 & DEV_3B64 & CC_0780

  and I want to know why my laptop cannot connect to the internet via a wifi connection?

   

  Hello

  Please try:

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
  Broadcom Wireless LAN Driver for Microsoft Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-81598-1&LC=en&DLC=en&cc=us&product=4230610&sw_lang=&OS=4063

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1488103C & REV_06
  Intel Management Engine Interface (MEI) driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79549-1&LC=en&DLC=en&cc=us

  Kind regards.

• Xbox wireless controller not connecting with PC, please help

  I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

  Hello

  Setting up Windows Media Center

  To use Windows Media Center with the Xbox 360, you must have a computer running Windows Media Center. Windows Media Center is included with the following versions of Windows:

  ·         Windows 7 Home Premium or full, professional edition

  ·         Windows Vista Ultimate or Home Premium

  ·         Windows XP Media Center Edition 2005

  Step 1: Get the key Setup of Xbox 360

  1. on your console, go to My Xbox , and then select Windows Media Center.

  2. follow the on-screen instructions.

  3. write down the 8 digit Media Center Setup key.

  Step 2: Add an Extender on your computer

  1. start Windows Media Center.

  2. click on tasks, and then click add Extender.

  3. When prompted, enter Xbox 360 8-digit setup key.

  4. complete the configuration of the Extender

  For more information, visit the link given below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-your-media-in-Windows-Media-Player-with-other-people-or-devices

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Xbox 360 Wireless Controller is compitable with Windows?

  Hey, I have a question, does the Xbox 360 Wireless controller compitable with Windows too?

  Please help me.

  Hi Destinyhope,

  Yes. Xbox 360 wireless controller is compatible with Microsoft Windows.
  For more information and assistance on the Xbox 360 wireless controller, click on here.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Battery wireless controller

  OK, I admit, I am not too clear, but this is the first time that I have been unable to figure out how to install a battery. I just got a camcorder VIXIA HF G30 and was beaten by the wireless controller battery compartment. No matter what I try, I can't get access to insert the battery. You would be grateful for the help, thanks.  Ted

  Hello tevans9129,

  The WL - D89 uses a CR2025 button-type battery.  It is located behind the battery tray which slides down.  To open, hold the remote in the right hand (covered on his back) and hang the nail of your left index finger in the small lot, which acts as a spring and pull toward you.  At the same time, use your right thumb nail to pull down the battery broke.  This will allow you to change the battery.

• 6030a HP MFP: HP Wireless Controller (map) pcb for HP 6030 has

  Can I install

  HP Wireless Controller (PCB) on a HP 6030 MFP printer?

  If Yes, what would the model/serial number please

  Stephen is correct.  See the link below this map works with your printer.

  http://h10010.www1.HP.com/wwpc/pscmisc/VAC/us/product_pdfs/3662193.PDF

• Xbox 360 wireless controller is not connecting with receiver and pc

  I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• 2504 versus 3850 wireless controller

  We are just beginning to look at wireless on our secure networks. We have a 2504 and some WAP 36xx but never installed. We also ordered a couple of 38xx WAP and group the 3850 templates which included the wireless controller. We plan use our Cisco ACS with CERT and AD for authentication.

  We're finally going wireless at several sites of fiber attached if cela pans.

  To save time by going down the wrong path, I have some basic questions to ask.

  My questions are... what (2504 versus 3850 WC) approach is better?   I know the 3850 series may have mulitgibit connections to WAP with the newest 3850 model x, which can be a more thereafter. I also don't know the process of how data is placed the user wireless via the WAP to the local network. Data must tunnel through a tunnel of IPSEC for the 2504 and then placed on the local network to the location of 2504?  Or is this just tunnel for authentication and wired LAN between WAP and switch allows direct data flow?   We have a few wireless on our network, but we use a totally different method.

  What bothers me is that if there is a certain wireless access to a corporate network and servers I think 1 GB for the WAP connection could be a bootleneck... esp if the data can not be placed right on the local network to the WAP connection to the switch.

  A 3850W model controls the only devices on the local stack or it may go beyond this restriction too? I mean, it's can support 3850W THAT connected to another WAP stack too?

  I would not use the 3850 unless your environment is weak, that being said, the 3850 and the AP must be on 3850 or 3650 in your environment. I'd go with the 2504 his stable and you will not regret it :)

  -Scott

  Please evaluate the useful messages *.

• Wireless controller Cisco 526 & AP AIR-AP521G-A-K9-Question

  Hello

  We have several AP 521 in our headquarters main building as well as our remote branches, totalling about 16 AP, four in our main headquarters office and one in each brachh distance.    All AP at this moment are stand-alone devices.

  We are contemplating centralized management of ALL our AP devices implementing this controller 526, where we can handle easy to access list of mac or other parameters.

  Here are my questions based on reading some documents based on 526 controllers:

  1. I undersland these models AP and 526 controller model are EOL, - what are these end of Support - at this time we are not planing to migrate to the new AP devices yet, maybe in 2-3 years on the road, but definatetly SmartNET is a must on these.

  2. for 526 be able to handle any device of AP, is the peripheral access point must be converted on KNEES, is that correct?

  3. as I read, 526 controller can support up to 6 devices AP 521, if this is the case for example... I can say install a 526 to the main AC controller which has only FOUR peripheral wireless AP and be able to manage also the 2 more devices AP of REMOTE offices that are not directly connected to main office switches HQ but to have connectivity that are across our links WAN MPLS or (wireless AP) should be directly connected to the LAN so that the 526 be able to manage devices, if possible, then that would allow me to implement 3 526 controllers in the HQ Office to handle all 16 devices AP of our entire company... Please correct me if that's not true.

  4. and finally, for example, say I have MAC ACL applied to each AP devices, now with the 526 controller if we go about using centralized management would be that I could create a MAC acl and indicate to the Scheduler to propagate the ACL to the devices all THE AP which are under its management?

  Thank you for your help

  Concerning

  1. This is the end of life announcement:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/end_of_life_c51-568040.html

  2. Yes, LWAPP APs are easier to manage from the 526:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/product_data_sheet0900aecd8060c22b.html

  3. you will be well on MPLS for AP to join a remote control. You may need to change the MTU if you have problems with the junction of AP.

  However, remember that if you are MPLS connection goes down, you lose connectivity, so it is a design decision to make.

  4. in the list of features, you should be able to:

  http://www.Cisco.com/en/us/docs/wireless/controller/526/1.5/configuration/guide/A3_feature_list.html