450 proBook G2: NIC for the Probook G2 450

Is a dual band network card appropriate for the Probook G2 450?

Yes, it's pretty new to the white list, so you can install any wireless with the right form factor card.

Here is the Service Manual:

Manual

See p. 45. HP offers of it which is the high-end:

Intel Dual Band Wireless-AC 7260 802.11 ac 2 x 2 WiFi + Intel Dual Band Wireless-AC 7260 BT 4.0 combo adapter 756753-001

Available on Amazon.com:

https://www.Amazon.com/710661-001-Intel-wireless-AC-7260-PCI-Express/DP/B00PDLCFL8/ref=sr_1_1?ie=UTF8&QID=1470826413&SR=8-1&keywords=756753-001

It is a plug-and-play replacement. You want to get the the driver files on the hard drive (as perhaps the office) and make them available before making the swap to make sure that the card will work once you restart Windows. Here choose your operating system from the menu drop-down:

http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6943827&swLangOid=8&swEnvOid=4059

You have Intel and Intel drivers bluetooth wireless.

If you need more help post back.

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • Designate the VLAN for the clones linked on a network interface

    Hi all

    I do a view pilot program using 4.6 and related clones. I have a server (small pilot) to all (vcenter, connect to the server, clients). I have configured an interface on the server as a TRUNK so I can have desktop VMs on different VLANS. How to configure view (or the desktop image base) to clients pools on the VLANs that I would like on?

    For example, computer office-pool1 I want to VLAN 10, office-pool2 I VLAN 11.

    Base Office I created, I put the VLAN 10, but the VMs system (created from the replica) begin on VLAN 11.

    Thank you

    Mike

    You must create groups of ports for each VLAN.  Then go to your parent image, change the nic for the port group you just created and to recompose.

  • Best practices for the redundancy of the network in vSphere 4

    I'm running a cluster of production with 3 3850 m2 running at this time around 70 machines virtual, with more to come in the future.

    I have 6 CARDS each to use for networking.

    I'm not sure which is the best award of the NICs process.

    The redundancy for the VMKernel can I?

    Team for the Service Console NIC?

    I currently have the following:

    vswif0 Console of Service vmnic0

    vswif1 network of the VM vmnic3, 4, 5

    vswif2 VMotion vmnic1, 2 (different subnet)

    I have need of 3 NICs for the virtual machine or should I team the Service Console?

    It would be better to put a second Service Console on the Virtual Network machine's power switch, or do I have to put it on the switch of VMotion?

    My prefereence is for VMotion switch, but I'm ready to hear the recommendations of those wiser than me!

    I have 8 currently

    2 > SC (1 active, 1 standby on separate physical switches)

    3 > VMotion, FT, customer iSCSI PG (Etherchannel) MTU = 9000

    3 > VM PG VLAN (Etherchannel)

    previous to this, I had 4 I did:

    2 > SC, (2 active) VMotion, VST (vSwitch VLan Tagging)

    2 > VM (2 active) VLAN, VST (vSwitch VLan Tagging)

    Saw some problems with STP so separated back SC.

    6 as you do it sounds like a very good Setup.

    (2) SC, VMotion (active on each, Eve for each)

    (4) networking VM

    Don't forget that just them having active only effects not inbound traffic coming out unless you have all these ports in an Etherchannel configuration.  There is an example in the kB for this.  But depends on the amount of traffic all VM networks have if they network traffic a lot you could get by with less ports there.

    The SC definatally you want some kind of uplink port intelligence network as with ESX SC with HA ports check insulation network through these ports, so if this one is down which could lead to problems of isolation.  It's not like you'll do any FT? so it's something else to think about with the installation program.

  • ProBook 4530 s... Cannot find the driver for the Atheros AR5B195 WLAN card

    I bought a Probook 4530 s with an Atheros AR5B195 WLAN & Bluebooth card, but I can't find the Win 7 drivers on the support page (or any work of drivers also on the Internet)...

    I was looking at this page and can not find the necessary drivers:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5060882&...

    Any help would be greatly appreciated!

    Tony

    Yes, I understand, that this card is also a bluetooth device, but * no * od drivers for the card.

    This is correctly referred to in the description of the files (and I also tried to download these drivers, but they did not work).

    But I was lucky to find even more of this forum and found this topic:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Pavilion-dv7-1247cl-need-driver-for-Atheros-AR5BXB92-wireless/m-p/385255#M49313

    When it was suggested to try this file:

    FTP://ftp.HP.com/pub/SoftPaq/sp50001-50500/sp50498.exe

    Although it is not listed specifically for my WLAN card model I tried anyway and works out of the box.

    Thank you all!

  • ProBook 4530 s: drivers for the controller network & USB Controller in win 7 pro 64-bit

    I recently installed WIndows 7 Professional 64 bit on my laptop and now I can use my WIFI & some Usb Ports,

    Please help solve this problem.

    Product name: HP ProBook 4530 s

    Hello:

    Here is the link to the usb3 controller driver...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060882&swItemId=ob_108572_1&swEnvOid=4059

    Since it can be a lot of different cards installed in your model series wireless, I'll need to view the ID of the hardware for the network controller so I can know what model your laptop wireless card has.

    Go to Device Manager and click on the device named network controller.

    Then click on the Details tab in the upper part of the window network controller.

    Now you should see a drop-down list of property and it will be by default the device description.

    On this list and select the second element (Hardware ID).

    After the first string of characters you see in the window.

  • Good for the budget for sports and wildlife photography and lenses all day 450

    Hi everybody I would like to know of lenses that are good for the hand that held sports photography and wildlife.i normally take pictures of horse riding needs to be possible to make quick point I would also like it for everyday photography (budget of 450)
    Thank you (I own a canon 1100D)
    LJ

    Your budget is a bit low for a goal of large animals, but the Canon 70-200 F4 L could meet your other needs. It's a very good goal two IQ wise and AF spped is excellent. Another interesting research choice are the Tamron 70-300 VC or maybe the second version of the 18-270 VC. (I had the original version & it was a very good goal, but not a 'great' lens).

  • Continually having error 1002. Lease IP address for the NIC refused by the DKCP server.

    * Original title: error 1002

    Continually having error 1002. Lease IP address for the NIC refused by the DKCP server. Have Realtek PCle GBE Family Controller, which is

    does not, but the drivers are up to date. I have Telstra 4 g modem netgear using network Local Area Connection 2 Sierra Wireless WWAN

    Adapter. If I run the commands ipconfig / release or renew all I get is media disconnected. I am able to use Realtek with Telstra.

    Hi Yvonne,

    Thank you for your response.

    I appreciate your time.

    I hope you can get your problem on the TechNet forum as soon as possible.

    Thank you

  • vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?

    Hello

    I'm looking for a networking of best practices for the use of 4-1 GB NIC with vSphere 5. I know there are a lot of good practice using 10 GB, but our current config does support only 1 GB. I need to include the management, vMotion, Virtual Machine (VM) and iSCSi. If there are others you would recommend, please let me know.

    I found a diagram that resembles what I need, but it's for 10 GB. I think it works...

    vSphere 5 - 10GbE SegmentedNetworks Ent Design v0_4.jpg(I had this pattern HERE - rights go to Paul Kelly)

    My next question is how much of a traffic load is each object take through the network, percentage wise?

    For example, 'Management' is very small and the only time where it is in use is during the installation of the agent. Then it uses 70%.

    I need the percentage of bandwidth, if possible.

    If anyone out there can help me, that would be so awesome.

    Thank you!

    -Erich

    Without knowing your environment, it would be impossible to give you an idea of the uses of bandwidth.

    That said if you had about 10-15 virtual machines per host with this configuration, you should be fine.

    Sent from my iPhone

  • Network of twinning with Port trunks to support the host ESX VShere 4 with several NIC for load balancing across a HP ProCurve 2810 - 24 G

    We are trying to increase production of our ESX host.

    ESX4 with 6 NIC connected to HP Procurve 2810 - 24G 2 ports; 4; 6; 8; 10 and 12.

    The

    grouping of parameters on ESX is rather easy to activate, however, we do not know

    How to configure the HP switch to support above connections.

    Pourrait

    someone please help with a few examples on how to seup the HP switch.

    Help will be greatly appreciated as we continue to lose tru RDP sessions

    disconnects.

    Best regards, Hendrik

    Disabling protocols spanning-tree on the Procurve ports connected to the ESX host is going to promote a recovery more rapid port. Similarly, running global spanning tree is not recommended if you mix some VLAN iSCSI and data in the same fabric (i.. e. you do not want a STP process to hang storage IO). Spanning tree on your switches, look PVST (or Procurve BPMH) to isolate the STP VLANs unique events.

    In regard to the load balancing is, by default (route based port ID) value algorithm requires less overhead on the ESX hosts.  You may not use LACP on the Provurve the lack of facilities LACP ESX. You must use "route based on the IP hash" sideways ESX and 'static trunks' on the side of Procurve. Unless you have specific reasons why your network need loads this configuration, I'd caution against it for the following reasons:

    (1) IP hash requires thorough inspection of packages by the ESX host, increasing CPU load as load package increases;

    (2) the static configuration puts switch physics rigid and critical ESX host port mapping. Similarly, groups of ports all will fail as the Procurve batteries for management only and won't be on switches 802.3ad circuits Group (i.e. all ports of a group of circuits must be linked to a single switch) - this isn't a limitation of the port ID routing;

    (3) K.I.S.S. love port ID mix of port ID, beacon probe and failover on the port assignments you will get segregation of the raw traffic without sacrificing redundancy - even through switches.

    I hope this helps!

    -Collin C. MacMillan

    SOLORI - Oriented Solution, LLC

    http://blog.Solori.NET

    If you find this information useful, please give points to "correct" or "useful".

  • Preparing for the exam 1Z0-450

    Hi all
    I am preparing for the 1Z0 - 450 in reading the docs and practicing the development so far. Is there a recommended practice for testing software? I know that Oracle does not recommend it for this test.

    Best regards
    Val

    Valerie Debonair wrote:
    Hi all
    I am preparing for the 1Z0 - 450 in reading the docs and practicing the development so far. Is there a recommended practice for testing software? I know that Oracle does not recommend it for this test.

    Best regards
    Val

    As much as I know there is no practical tests allowed for this test.

    While originally for apex 3.2... This review has been upgraded for apex 4.0

    http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=41&p_org_id=28&lang=us&p_exam_id=1Z0_450

    In general, likely a careful reading, Research and practice of the topics of the review.

    It is a hasty response from me.

  • How to set up the new switch/ports/NIC for MS iSCSI initiator

    Hello

    I'm looking for data on our main server snapshot and then include it with our VM through scripted admsnap commands. I found that the only way to attach/detach when the server is running must be involved in the Microsoft initiator path.

    I am now tripping over the implementation of networks necessary for this virtual machine display the SAN using the initiator.

    Our up to date is:

    vSwitch0 that vmnic0 & 1 (range 192.168.1.x) and is used for LAN traffic for the virtual machine

    vSwitch1 that vmnic3 (192.168.252.x range) and is used for SAN storage processor has

    vSwitch2 that vmnic2 (range 192.168.253.x) and is used for SAN B storage processor

    http://i44.Tinypic.com/20pezr4.gif [line] 

    Our ESX box can connect to the LUNS on the area of SAN ok but I just can't get the same ping VM after the addition of two new network cards and to configure them with the correct IP address, which I suppose is because the 192.168.252.x and 192.168.253.x ranges are not present on the virtual machine and there is this problem I would appreciate some advice on SAN storage processors. How you allow the virtual machine is to use vSwitch0 & 1

    Thank you.

    Hello.

    vSwitch0 that vmnic0 & 1 (range 192.168.1.x) and is used for LAN traffic for the virtual machine

    vSwitch1 that vmnic3 (192.168.252.x range) and is used for SAN storage processor has

    vSwitch2 that vmnic2 (range 192.168.253.x) and is used for SAN B storage processor

    Our ESX box can connect to the LUNS on the area of SAN ok but I just can't get the same ping VM after the addition of two new network cards and to configure them with the correct IP address, which I suppose is because the 192.168.252.x and 192.168.253.x ranges are not present on the virtual machine and there is this problem I would appreciate some advice on SAN storage processors. How you allow the virtual machine is to use vSwitch0 & 1

    I'm guessing that you have added two new adapters with the label 'VM Network' network to this virtual machine?  I'm also guessing that vSwitch0 has no access or routing to the storage network.  If so, you will need to do is change the vSwitch1 and vSwitch2 to add a new type of virtual machine connection.  Click on the 'Properties' link beside vSwitch1/vSwitch2 and in the tab "Ports" click on the button 'Add '.  Choose 'Virtual Machine' in the type of connection, it give a descriptive label and click Finish. Then return to the virtual machine (change settings) and change the network connections in your virtual machine to point to the new label, that you just created.  Finally, configure or verify) addressing IP in Windows and try the Ping again.

    Good luck!

  • need drivers for the following!

    need driver for the following equipment. in fact, it shows as unknown device in my Hp probook g1 450 4th generation i5.

    ACPI\HPQ6007
    * HPQ6007

    I would be happy if you please give me the link of the drivers.

    You need HP 3D DriveGuard on your list of pilot. Choose which operating system you are running and you will pass to the right page:

    http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5405426&AC.admitted=1412400073783.876444892.199480143

  • Best video for the Web?

    I created a site offering artists around my city. The most important thing is the videos and that's what I have a problem with. Can you help me?

    I started with the flv files swf turned and who was allowed. The problem was he wouldn't play on IPAD and other devices.

    So, I read online that a mov or mp4 file was good. Today, I received so many responses from those who said that the video is so slow that they have not even watch.

    I tried to increase my size to a size close to youtube, so it was more visible then my first posts.

    The site is

    www.adamsstreetsessions.com

    Thanks in advance

    . FLV is currently the best format of video container for the Web...

    As a rescue use swfobject for Flash detection and provide a .mov as ALT content file

    Link to swfobject:

    http://code.Google.com/p/SWFObject/

    Sample .flv video that plays on the iPhone:

    http://www.cidigitalmedia.com/tutorials/Qt/play_qt.html

    relief is .mov file. View the source code to see how it works.

    A potential problem of slow download .mov files is if the moov atom is at the end of the file rather than the beginning... Hey, I don't do this kind of things, I just tell you about it. The download is not slow, it's just that the entire file has download before he plays. If the moov atom is at the end of the file, the full .mov file must be downloaded before the video starts to play. It will be not progressive download as an .flv file (another reason why .flv is the video container of choice).

    You can restructure the .mov files are needed by using QuickTime Pro, and save as.

    Google to know the exact details or check here:

    https://www.ezs3.com/members/login.cfm?hpage=Checking_Metadata_or_Moov_Atom_Location.cfm

    If the video bitrate and/or the size is a problem, investigate it to an old post:

    Video bitrate

    One of the principle of goal setting is to "begin with the end in mind". In this case, it will be very difficult to give good recommendations because the end is not defined. So I'll just make a few assumptions and you can correct me if necessary.
    First, I'll assume that you convert Flash, whether you want to broadcast this video on the Internet. If that's true, then going to make some assumptions about your potential viewers Internet connection download speeds. Let's just say that most have at least a 1.5 MB connection or faster.
    OK, that would mean that a video bitrate of half that generally provide a video download that is not interupped by the buffering (most of the time anyway). So assuming a video bitrate of 750 kbps, what would be the optimal display size?
    Before decide us, here's a little info on the bitrate. To read more high quality, the bitrate of the video is directly related to the size of the screen. In other words, more display, incoming data more are needed to correctly display the video. Think of bitrate in terms of a can of paint. If you have 1 quart of paint, you might be able to do a very nice job on an area of 32 X 24 feet. But if you try to stretch the same amount of paint on a surface area of 64 X 48 feet, the coverage is not as good and you get mediocre results.
    Similarly, a video display to 640 X 480 pixels will require 4 times the baud rate as a video displayed at 320 X 240 pixels to produce the same quality. Thus, for example, a video with a speed of 100 kbps, 160 X 120 displayed will produce the same quality results as a video with a bitrate of 1600 kb/s is displayed in 640 X 480.
    So, to sum it all, 750 Kbps, even up to 1000 kbps video rates can usually get delivered high-speed Internet on most connections. Higher rates may work for connections very fast but will cause problems for viewers with slower connections. Video display size has a direct impact on the final quality. In the range of 750 to 1000 Kbps, display size should be maintained around 450 or 500 width max (and whatever the height proportions claims). Yes it can be displayed larger, but the quality will suffer.
    Sounds like the audio settings are fine, especially for delivery on the Internet.
    Regarding the framerate, maintain the framerate video original raw for best results. Therefore, if the clip was shot at 24 frames per second, let him.
    In regards to video converters, you have the Flash 8 Video Converter? It works very well for the video to be delivered over the Internet. Don't forget, you're taking a Cadillac of video (h.264 HD) version and cram into a Chevy body so he can work on the Internet.

    Best wishes

    Adninjastrator

  • How to choose the account used for the sharing service Google/Gmail?

    I am always connected to three separate Google/Gmail accounts at the same time. Each is used for different projects/types of communications (e.g., personal work, another project). I want to use the service of sharing, but when I click on share it does not give the option to choose which account to use. This makes the sharing service for the most useless. Could you if you please correct this? Thank you!

    I missed this: https://activations.cdn.mozilla.net/e.../gmail.html and, even though I am connected to multiple accounts. I asked the team about this feature. However leave a comment for developers input.mozilla.org is also a great place to request this feature.

    It seemed so nice:
    https://addons.Mozilla.org/en-us/fire.../?src=search

  • Do not select background in FCPX for the title of motion

    I created a Motion 5 title and published all the settings for the properties, and the form of a 50% opacity rounded rectangle background. I can't select text in FCPX, but I can't select the background of the rounded rectangle. I did a generator of the same thing and impossible to select the background that helps in FCPX either. How should I do the text and the background selectable in FCPX?

    I'm slow to grasp the concepts of the video, am brand-new to the use of FCPX and have used only Motion for a few months for limited purposes, so it is very likely, that miss me something quite obvious.

    'select' the rectangle? To apply adjustments such as color, roundness?

    Or you want to move your custom title?

    If so, I would like to...:

    .. Put the text and rectangle in a group and issue groups X / there postions...

    So, when you change your contact information in FCPX, both, the bubble and the text pass.

    I FINALLY how: apply a nice OnScreenControl and not x / y numbers:

    .. to drag the title with the mouse...

Maybe you are looking for

  • PLSS help me to fix my iphone 5 s

    PLSS help my iphone 5 s is not power at all. If I plug in my charger nothing appears but just black screen I use any method that I watch on youtube, but nothing happens I press the home button / power at the same time, but not the power. help me plss

  • How can I make a visible folder for users of other computers

    I made a folder I want to keep some incoming e-mails, but it is not visible to the other users who can access the primary e-mail account. In addition, if changes are made to emails in the first account by a user, it does not affect other views of com

  • Repair Microsoft error message unexpected error cannot run

    I downloaded MS fix and tried to run, but get the error message that says: "an unexpected error has occurred, Wizard cannot continue. I am running windows xp. Any help here? Thank you

  • user data access to content such as contacts

    How can I add the feature of accesiing data of the user as contacts. Please send me the code.

  • Backlight intermittent dv7

    Hello world of HP. A few months ago, I bought a new laptop dv7-3085dx B * B * y st. It's pretty much a portable fantastic and worked very well except for this issue now, I'll describe. Sometimes when the laptop is started from a cold state (closed al