4500 envy: This printer is unavailable message

Will cause receiving message "this printer not available" when tent direct printing but nothing has changed since the last successful print job and only one single user. How can I get the printer to work?

-Very well, we just spread the problem to your network, as it does the same thing if bypass us the router. Next thing we will do is to see if you have the same problem with ePrint. To do:

  1. On the printer, click web services icon that looks like a tablet with a phone beside her.
  2. If the screen you now ask the web installation services then do.
  3. From your tablet, send an e-mail to the address of the printer that appears on the printer display.

If it prints normally, follow-up with ASUS will be your next step that the printer is fine. If you receive instead of a blank page, the problem is with the printer. We will try to update the firmware by clicking on the icon Web Services, press the button "-" next to settings and updates scroll and press OK.

Please let me know if you have any questions while following these directions and what happens after you complete these steps.

Tags: HP Printers

Similar Questions

  • HP 5640: New Envy 5640 printer gives error message of black print cartridge

    I just bought this (to Japan). I get the message "Remove and reinstall the ink cartridge, ensuring that it is properly installed, and then tap ok" stated for the BLACK cartridge.  I was able to print in blue with color for alignment, but this messge is not going away. I see that this practice is common if I look on the Internet. But why. I has not yet touched the sheet after removing the cartridge? I have a lemon?   I need this printer to work this weekend that I had to replace a premium C110 due to bad rolls.   Can anyone help?  Thank you!

    Hello

    Please click HERE to access the procedure which should solve the problem.

  • HP 4500 envy: photo printing

    I bought a hp envy 4500 Saturday mainly for printing photos. I got some pictures already saved on my laptop and when I try to print out smaller as they should be, even if I set the size of 6 x 4 paper and size of the image. It seems to be the right size on the preview before printing but still comes out smaller.

    Thank you very much

    Ian

    Hello

    What software are you using to print? Please use HP Photo Creations (that came with your printer) to print.

    Kind regards.

  • HP 4500 Envy: The printer is not printing with ipad

    Hello

    Since bringing my printer back from another place it does not my I pad print. It is to show that connected to my network and my I pad is identifying in wifi settings and the printer selection options. Although if I do a search for printers look like "no air printer" found. When I press the option to print after you select the pages/color selections nothing happens.

    Thank you

    -Leaves

    Hi @Leafy,

    Welcome to the Forums of HP's Support. I understand that your iPad is unable to locate your printer over your network.

    I would like to start by turning off the printer and the iPad. Then disconnect the power from your router for about a minute. After the router was plugged devices and back on, try a test print.

    Also try the procedure described in the following post: Basic for ePrint AirPrint troubleshooting

  • HP 4500 Envy: Not print entirely on the image printed

    I use HP 4 x 6 glossy paper. I loaded the paper correctly, (until I hear the click). When I choose to print 4 x 6, it prints only a portion of the paper not full-size.

    I have selected to 'Fit', but then a part of the photo is not printing on paper, which means that one party gets cut.

    I chose 'Full' again once a part of the photo is not print on paper, part gets cut.

    Finally, I chose "Custom", but same results when I chose paper 4 x 6.

    What I am doing wrong?

    Thank you

    prov39

    I thought that it out - I also need to specify the size of the paper on another area where the parameters have been missed as envelope!

  • 4500 envy: how to print in black or grey only

    It does not show under options

    Go to the devices folder and printers, right click on the 4500 Envy, select Printing Options, paper/quality, advanced, Options of the Document, print grayscale, black of ink only, OK, apply.

  • HP Envy 4500: Cannot print the error message

    I just replaced the black cartridge of the moment on my 4500 and the printer will not print. I get the error message is - cannot print. Visit www.hpinstantink. Com for info. I did that but it's impossible to find useful info! Help, please!

    Hi @clairerobinson6.

    Welcome to the Forums of HP's Support. I understand that your printer does not print and directs you to instant ink site. I would like to help.

    The printer is in the instant the ink program. He receives this error for two reasons. The printer has not been able to connect to the servers of HP ink level controls or the number of pages in a long time, or there is a bill pending. Normally when you sign in to your instant account of ink there is an opinion on the matter. If you do not see a notification, try to reach out to the instant the ink Department.

    You can send them a tweet directly from your instant ink account, or use this link to find the appropriate phone number.

    If you have any questions, or if this does not resolve the problem, let me know.
    If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

  • 4500 envy: Envy 4500 will not be printed on photo paper

    I have a 4500 Envy will be printed on plain paper but as soon as I load photo paper it will not print on it.  I tried different manufacturing of paper and he'll come, but then just smears on the back with nothing on thr front while others, he just tells me to load paper.

    Hi @JimMackie,

    Please try these steps and getting back to me.

    Because the printer does not have the paper, I would recommend to try the steps listed in the document below. You can start to "Solution 2: adjust paper settings in the print driver.

    A Message appears "Out of paper" for HP ENVY 4500 and Deskjet Ink Advantage 3540 e - all-in - One Printer Series "

    If you arrive at "Solution 4: service of the printer", then I would recommend contact you HP.

    Contact HP:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number appear

    I hope this helps.

    If this help will testify of my answer by hitting the thumbs to the top slot

    Click on the button "Accept as Solution" if I helped you reach a solution.

  • HP Envy 4500: New black print cartridge

    Hello

    I'm new to the forum but I really need help, and I can't get any support online via the HP Web site.

    I bought a new HP Envy printer 4500 July 1. Being a writer, I do a lot of printing so I usuaully buy HP 61XL cartridges. I used the cartridge supplied with the printer but when I installed a new, it gives me this error message: "the installed cartridges are not intended for this printer.

    I can't use XL cartridges? It is a new cartridge, so I don't think that the cartridge itself is damaged.

    Wells Sharolyn

    The HP SureSupply site indicates your desire 4500 supports 61XL cartridges.

    The troubleshooting in the here document steps can help resolve the error on your black cartridge 61XL cartridge.  In particular, see steps 3 to 6.

  • 4500 ENVY: ENVY 4500 printer stop printing after a few pages.

    If I printed only 1 or 2 pages, it works fine for my printer. But if I print more, he may stop printing in the middle of the process and on my laptop says "Error on HP ENVY 4500 (network) printing" but nothing else.

    I tried to use the HP print and scan doctor software but it does not solve the problem and has not detected and errors

    Hey @saycheese,

    I understand that you get the "error printing" message when you print multiple pages of your computer Windows 8.1 documents to your HP ENVY 4500 e-all-in-one printer. I would like to help you today with this printing problem. Right now, it sounds like a conflict of WSD Port (network) takes place within your computer Windows 8.1. Therefore, at the beginning troubleshooting I'll have you run a patch to correct this problem. Please follow the steps below.

    Microsoft has released a hotfix to correct printing problems in Windows 8.1 operating system. Printing problems seem to affect printers on a network, regardless of the brand or model, and there is a conflict with the WSD Port network Windows 8.1. Please click here to download and run a Microsoft Fix it Tool. "Once the site opens for the fix, please click on the button 'available hotfix download". Please follow the prompts on the screen to install the hotfix. Once the fix has been loaded please try again to print a multi-page document.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • HP envy 5530: E print app on my phone says this printer does not exist.

    I am trying to add my printer to my application on my phone and I get the error "this printer does not exist or you do not have access to him."

    I went on HP Connect site and it shows that my printer is online and ready to use.  I checked to make sure that everything has been updated. I'm not sure what I'm doing wrong.

    Here are a few extra in case info

    HP Envy 5530

    Windows 7 64 bit

    Thank you

    Hi @mcmoran2004

    Welcome to the Forums of HP's Support.  I understand that you get an error message when you try to add your printer to your HP ePrint app on your mobile device.

    If you get this error message when you try to add the printer to the application using the ePrint printer e-mail address, then follow the steps below.

    1. Please delete the app on your mobile device.
    2. Please turn off your camera mobile for a total of 30 seconds, and then power back on, please.
    3. Once your mobile device has completed its startup routine please download and install the application again.
    4. Please activate the application using your personal email address.
    5. After the activation of the application please try to add the printer by its address of email ePrint.
    6. If you still get any error message then, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

    Please let me know the results.

  • E HP Envy 7640 All-in-One-Sanchez: now, I have my documents stuck in the queue and I can get out. Help! I hate this printer...

    Whenever I change the paper (photo paper) when I get back to paper ordinary, it is immediately past offline or it gets stuck in the queue.  Now it is stuck in the queue.  Is it possible to get this printer to print without all these problems.  I am extremely illiterate on computers and this crazy.

    You helped me with "off connection" now can help you with this problem.  Thanks for the help, I really appreciate it.

    Hello @Sam141, greetings!

    Welcome to the HP support forums. I'd love to help you with your printing problems with your printer Envy 7640.

    I understand that you are a new user with this printer, that's why I suggest using an automated tool to correct this and many other common printer related issues.

    Go to http://hp.care/2bZ9w2q to download and install HP print and scan the doctor. This tool will be quickly and automatically perform several tasks resolution known problems for this problem. You can save this for future issues you can still.

    Please let me know if that solves the problem, or if you need assistance.

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • HP 4500 Envy: Envy 4500 print not downloaded fonts

    Recently, I downloaded a new font to use in Word, Roboto slab.  I find that I can print only this after you have saved the file in pdf format. I can't print the Word with Roboto slab doc.

    The envy not print the downloaded fonts, specifically, Roboto slab?

    Thank you!

    Hey @kywassell,

    I'm glad to see that you can print at least when you save the file in PDF format and this is a major investigation that other clients may also ask you please click the "accept as Solution" If you feel helps you to this post, or could help others.

    The printer does not support downloadable or scalable fonts. Roboto slab fonts are downloadable and therefore would not work. My Sources are as follows,

    Print specifications

    Print language

    HP PCL 3 GUI

    HP Deskjet, Officejet from HP, HP, HP Business Inkjet color inkjet - 3 PCL and PCL 5/6 functions and different...

    See you soon!

  • "Black ink cartridge is not compatible with this printer" message - 56 HP deskjet 5552

    I just replaced my HP 56 cartridge in my old printer HP Deskjet 5552 - I use an iMac & when I try to print, I get the message error "black ink cartridge is not compatible with this printer.

    It makes no sense that I replaced the cartridge many times before without ever having a problem.

    I have already returned a cartridge to the store where it was a problem with the cartridge itself, but the same thing happened with a second.

    Any suggestions gratefully received.

    Thanx, Alison

    Hello

    It usually take a few cleanings to operate.

    Best regards

    ERICO

  • HP Deskjet 3050 a J611 series. I have used this printer before with the same laptop. Error message #5

    I have a HP Deskjet 3050 a J611 all-in-one. I have used this printer with the same laptop that were purchased together.

    He was works fine, but now when I try the CD to install, an error message comes up with cannot load drivers or cannot find the port to monitor? I tried everything to implement without change.

    Have you tried to download the drivers from the Web site. Here is a link that will help you with it. http://goo.GL/BVOOg

Maybe you are looking for