4540 proBook s: basic unit missing

Hey people,

I'm doing a Windows 7 OS reinstall on a laptop of mine, a Probook s 4540 using the recovery media that I bought from HP. I have then updated the operating system windows 10 almost immediately. I'm getting some errors on the device manager about some basic system devices missing. I saw a few posts with similair emits and didn't know where to look to find the correct drivers. Thanks in advance for any help I can, I'll also post a screenshot in the screen of the device below.

Hello:

You need this driver...

The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

FTP://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

Tags: Notebooks

Similar Questions

  • 4540 proBook s: unknown device missing after installing windows driver 8

    My laptop is a Probook s 4540

    I installed Windows 7 to windows 8.1 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.

    The hardware Id are:

    ACPI\VEN_HPQ & DEV_6000
    ACPI\HPQ6000
    * HPQ6000

    I don't know what it is or a driver for it.

    No matter who else knows it or know what this device and where I can get a driver for it.

    Thank you

    Hello

    Should be HP 3D DriveGuard 5 on the following link.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456&swItemId=ob_124200_1&swEnvOid=4158

    Kind regards

    DP - K

  • T61 6457-4UG - missing basic units

    Hi I have installed T61 W7 in this ref above. I get 2 messages not specified in the list of drivers of machine (I don't remember what it's called in English). Right-click on computor then properties...

    The messages are basic units drivers are missing. I installed W7, but by default from the factory is Win XP PRO.

    k

    Most likely, you will need to install this:

    Ricoh Multi card reader - Windows 7 RTM Version

    Don

  • 4540 proBook s win8 64-bit driver missing

    Hello

    I got 4540 probook s who has windows 8 Pro 64 bit and I have the following problem - I see 4 components that are not recodnized and does not have the proper drivers. I downloaded all the drivers available on hp.com but the problem still remains.

    The model is: C4Z10EA #AKS

    Here ate they:

    PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C & REV_30
    PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C
    PCI\VEN_197B & DEV_2393 & CC_088000
    PCI\VEN_197B & DEV_2393 & CC_0880

    PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C & REV_30
    PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C
    PCI\VEN_197B & DEV_2392 & CC_088000
    PCI\VEN_197B & DEV_2392 & CC_0880

    ACPI\VEN_HPQ & DEV_6001
    ACPI\HPQ6001
    * HPQ6001

    ACPI\VEN_HPQ & DEV_6000
    ACPI\HPQ6000
    * HPQ6000

    Please, advice if you can help me with the problem.

    Thank you in advance.

    ARO

    ASCO

    Hi, Asco:

    Here are links to the drivers you need...

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4132 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-115197-1

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4132 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-110946-1

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4132 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-110813-1

    Best regards

    Paul

  • ProBook 4320 s: driver missing

    Hello

    After the upgrade to windows Pro 10, my HP Probook s 4320 is missing this driver:

    ACPI\HPQ0004\3 & 21436425 & 0

    If a person who I can use because windows 10 or the HP auto detect is nothing.

    Thank you.

    Hello:

    For the version of 3D driveguard 0004 of the material, you need this driver...

    FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

  • 4540 proBook s (H6D81ES #ABF): problem of fingerprints

    4540 proBook s (H6D81ES #ABF) 10 64-bit Windows

    Hello, first of all I want to know whether or not that thing in the picture is the fingerprint. If yes why I see something biometric on Device Manager or the BIOS even after I installed the validity sensor driver and chipset one.

    Also I don't have Windows Hello after setting the PIN too.

    @Wajdikh

    Wajdikh wrote:

    4540 proBook s (H6D81ES #ABF) 10 64-bit Windows

    Hello, first of all I want to know whether or not that thing in the picture is the fingerprint. If yes why I see something biometric on Device Manager or the BIOS even after I installed the validity sensor driver and chipset one.

    Also I don't have Windows Hello after setting the PIN too.

    4540 s laptop HP ProBook

    The fingerprint reader is an optional component of your laptop.

    The image you posted shows the Notepad in the image doesn't have a fingerprint reader; small empty coverage shows where the player would be installed.

    Identify components

    Specifications

    How to add a PIN to your account in Windows 10

    Assign a PIN to use with Windows 10 login is no by-itself provide Windows Hello facial or fingerprint login - Windows Hello requires a device to use: 'properly' (high quality) camera, fingerprint reader

    Learn more about Windows Hello and put in place

    What is Windows Hello?

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • 4540 proBook s: black screen

    My 4540 probook s graphics has intel and amd card... when installing drivers intel on my 10 windows, screen turns black... I need help

    anyiego

    If your PC is preinstalled with Win10, there is no reason why you would be installing video drivers because the good ones would already be in place.

    If you have improved your PC to Win10 yourself, the problem is that your PC seems to have switchable graphics, and in this case, MS has a history I'm sorry bad video drivers installation.

    You should see if the graphics drivers from the product page HP for your PC, for 64-bit Win10, fix this problem: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5229456&swLangOid=8&swEnvOid=4192

    Good luck

  • boot from the disk HARD second 4540 probook s

    Hello

    I replaced the optical drive with a second HDD on 4540 ProBook s. I read of this 2nd HARD drive but I could not configure BIOS to boot from it, and boot device options lists only the first HARD drive.

    It's pretty common. Simply because the BIOS is written to boot from an optical drive connected to this port does not mean that he will start on a hard drive. I don't think there's any way to boot from the hard drive adapter in the optical Bay.

  • 4540 proBook s mdt2012 net driver

    I searched high and low for a solution and tried several different things, all for nothing will do. We have several new portable 4540 probook s and I'm looking to deploy using MDT 2012 windows7x86. I have uploaded the drivers to my host to deploy and rebuilt my images of pe, but winpe does not connect to my deployment share - error - the following pΘriphΘrique ParamΘtrage did not have a driver installed. I have double and triple checked the driver's inf file and it matches the PCI\VEN id on the material in the factory responsible for the OS. DRVLOAD refuses to load this driver when pointed at it. I use sp59118 for the realtek gigabit lan adapt. I tried the driver for our old 4530 s, and even if she is charged, I was still unable to see an inface or connect to the deployment share. Can anyone help with this? Please? My sanity hangs in the balance on this one. Thanks in advance.

    John

    Hello

    I had replied to your post earlier, but apparently it never went through.

    I tried my 4540 s here with my team multidisciplinary-2012 and it works very well. My litetouch.wim mdt is based on windows 4 and I to use the winpe driverpack sp60861 hp.

    Note that there is also a winpe 3.x SP58992 form.

    Could you let me know what version of winpe, comes your litetouch.wim?  WinPE 3or 4 x 86 or x 64

    To try to reproduce your issue tro I tried the following:

    1. Extract p59118
    2. Has taken a fresh winpe 3.1 without any additional driver added
    3. Use dism to mount
    4. Then add the driver c:\swsetup\sp59118\WIN7\NDIS6\32\hp86win7.inf
    5. commit the changes and unmount the image wim

    I then started the 4540 s that wim has successfully loaded the driver for the CARD, and I could connect to my server mdt-2012.

    I also tried to start my 4540 s fees, vanilla, winpoe 3.1 x 86, then use drvload to load the hp86win7.inf driver does load successfully and again once I could connect to the server mdt-2012

    So, I am sure that this driver is OK.

    Could you tell me what version of winpe, you use?  3 or 4 also x 86 or x 64?

    You can check that the correct driver is loaded in your Michael boot.wim file?  Use dism to get a list of driver and check if you see correctly rt86win7.sys

    In addition, when you boot your mdt boot media, press F8 to get a cmd command prompt and do an ipconfig to check whether you are connected or not.

    Also if you want you could send me (I can give you an ftp site) your wim file bootable and I could watch and I hope to resolve this.

    Let me know

  • 4540 proBook s: 4540 s probook has internal compass

    4540 probook s has an internal compass?

    If so, how can I active it?

    Thank you

    @wp51dos

    With the help of GPS (some models only)

    Your computer may be equipped with a Global Positioning System (GPS). GPS satellites

    deliver location information, speed and direction for GPS systems.

    For more information, see the software help HP GPS and position.

    Search for one of these 2 devices in device under network adapters Manager.

    ● Sierra MC8355 HSPA/CDMA with GPS

    ● Ericsson 5321 HSPA + with GPS

    REO

  • Problem Bluetooth in 4540 ProBook s

    Hello

    Recently, I bought a 4540 probook s. everything is fine and I just have a problem with its bluetooth. I can't send anything to my laptop via bluetooth. my phone is successfully added to my bluetooth devices & I can send files from the laptop to my phone, but nothing happens when I try to send items to my phone to the laptop. BTW, no error message is shown to me.

    Farzaneh Salam jan.

    Bayad ro bluetooth icon add currency bezani.onvaght go * beep * o peida mikone, entekhabesh mikoni connect mizani

    (Jean file khasi nafrestadi * beep * Hat connect mizani) .badesh ye kod behet neshon mide ro labtabet. on kod ro go * beep * azat mikhad.kod ro behesh noon will hodode 30 sanie vaght mibare badesh badesh connect mishan.onvaght dige labtabet Robert go * beep * o mishnase go az har kodom bekhae befresti nadari moshkeli leader.

    ishala ke moshkelet hal beshe.

  • Unable to get the basic unit of the stainless steel bracelet

    Hi, I am unable; e of pop on the basic unit of the steel stainless bracelet body. I couldn't find anything online that shows the process. In addition, can I exchange the strap metallic with leather and other straps? where can I buy these? Concerning

    Hey!

    I understand that it may be a little difficult to understand, since there are no edges or cuts to adjust to pop the base unit on. I took a few photos for you:

    Basically what you need to do, it's only gently but firmly push you down on the screen next to the edge to pop out. Make sure it is on the same side as the microUSB port, you recognize there is not not a small hole in the front (and a microUSB on the back port). I've marked the photo that I took with the green as to where you have to press on and red on the side that you should not press.

    Once jumped, it will look like this:

    Let me know if is not yet known!

    About yew, you can exchange the strap, it's quite possible. Everything just to get a different bracelet and insert the base unit. Unfortunately, I can't help where you find it as it varies depending on the market, but see if your retailer can help you in this regard!

  • 4540 proBook s: this device cannot start. (Code 10)

    This device cannot start. Graphic adapter standard vga (code 10)

    product: 4540 probook s h5j77ea #abv

    series: 2ce318091f

    Hello:

    You must download and install this graphics driver...

    This package provides the AMD video drivers and control panel for models of laptop computers that are running an operating system supported.

    File name: sp57199.exe

  • 4540 proBook s: drivers missing

    Hi, I have a few questions.

    I formatted my computer laptop hp ProBook s 4540 with windows 7 64 bit and I noticed that my laptop is no longer permitted to detect all internet. I did some reading on it and looks like missing the following drivers. I've never done this before, and I guess I need a USB driver download and load them up on my laptop?

    The following drivers are missing:

    Base system device

    Base system device

    Ethernet controller

    Network controller

    PCI Simple Communications controller

    Standard VGA Graphics Adapter (Note: there are two of them and one of them says that the driver is missing.)

    I guess as long as I have my ethernet or my controller network still work once I can just "Update" the other riders and they will work?

    Either way, my network controller hardware ID is -.

    PCI\VEN_168C & DEV_0032 & SUBSYS_1785103C & REV_01

    PCI\VEN_168C & DEV_0032 & SUBSYS_1785103C

    PCI\VEN_168C & DEV_0032 & CC_028000

    PCI\VEN_168C & DEV_0032 & CC_0280

    Hope someone can clarify this for me. Thank you.

    Hello:

    Yes, you can put on a USB drivers and allows to run on your 4540 s.

    Here are links to the drivers you need...

    Standard VGA adapters... this driver will install both of them.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229457 & swItemId = ob_105419_1 & swEnvOid = 4059

    X 2 base system device:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229457 & swItemId = ob_124666_1 & swEnvOid = 4059

    Ethernet controller:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229457 & swItemId = ob_123192_1 & swEnvOid = 4059

    Network controller:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229457 & swItemId = ob_108191_1 & swEnvOid = 4059

    PCI Simple Communications controller:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229457 & swItemId = ob_124514_1 & swEnvOid = 4059

  • 4540 proBook s missing 2 base system device drivers in the other devices category in Device Manager

    Windows 7 Pro 64-bit

    Hardware ID:
    PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C & REV_30
    PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C
    PCI\VEN_197B & DEV_2392 & CC_088000
    PCI\VEN_197B & DEV_2392 & CC_0880

    and

    PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C & REV_30
    PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C
    PCI\VEN_197B & DEV_2393 & CC_088000
    PCI\VEN_197B & DEV_2393 & CC_0880

    What drivers do I need?  Thanks for your time.

    Hello:

    Go to the page support and driver for the 4540 s and download and install the JMicron card reader driver (under the storage section).

    Since you're under W7, click the history tab to review and select the oldest driver, you can.

    Many people reported to the blue screen of pilots the newer PC (it causes down).

Maybe you are looking for

  • photos on the blocked contacts

    Hello In the view 'Skype home» photos shows on the contacts that I had conversations with, unfortunately, I think that even the contacts I have blocked. I don't want to show them, but can't get rid of them. I already deleted my history of the convers

  • Remote Tiger installation?

    My PowerMac G4 has a fickle CD/DVD drive. With a few tests, I started on the installation of Tiger and security-erased CD hard drive. But I can't complete installation of Tiger. I also have a FireWire/Pismo PowerBook. Can I connect the PowerBook in t

  • Icons to keep moving every time that I reboot my system.

    Move icons I uncheck Align the grid and automatic reorganization under the icons to reorganize by, but I have icons keep stepping back to the left side of the screen every time I sign out and then sign back in.

  • HP 15-R015tu: missing Bluetooth device driver

    My device displays Manager that my bluetooth peripheral device and ethernet drivers for the controller is missing and when I download it on the site of HP I am confused to which driver is to download fo it Can you please send me a direct link to thes

  • Cannot delete the sync partnership

    This is the second time that this has happened after I re-installed Windows 7 to solve it the first time. When I have copied a standard file from W7 as my Pictures\Slideshows or moved to the location of Username\Downloads on a network share, it creat