4540 proBook s does not start after stopping
Brand new Probook s 4540, B7A48EA #BED, of the box. Memory 4 GB DDR3, 500 GB, processor i3, SUSE Linux disk.
I have install the battery, connect the power supply and turn on laptop. Linux installation started, got the message 'creating recovery root tarball' and wait, wait and wait with the same message of Linux. I rebooted the laptop and after that got Linux message 'Cannot find size info part of recovery' and restarted itself, every 120 seconds.
I turned it off, by pressing the power button / stop 5 sec.
After that, I can't turn on laptop. When I press the power button / stop, power, drive, browser and Flash of LED wireless, you can hear disc trying to turn but fail and all the lights go out and about 2 seconds later all lights flash once again, drive tries to spin but fail again and laptop does not start.
I have 'power reset', updated the BIOS (F.40), removed the drive and DVD drives, tried without battery but no change in behavior. I returned the drive and the original DVD. After removing the memory, portable lights, as if, and caps lock flashing of LED 3 times which means error memory. After that, I did a "reset power" once again, reinstall memory and try to start the laptop. After pressing the power button / stop at the beginning I had same symptoms I described, and after 2 portable seconds began. I installed Windows 7 Pro. Laptop computer can be restarted Windows, but after stopping, he can't press start button to start / stop.
One way to start is to move the memory in the other slot, but it cannot start after his stop. After his return in the first memory location can be started again until the next stop. And when start, does not start from the beginning, but after 2 seconds, for his second try. The BIOS memory test, the EFI system diagnostic and memtest86 has errors. I tried with different memory module but got the same symptoms.
Should I change a motherboard?
After replacing the motherboard (systemboard), everything works.
I installed ESXi 3.5.0 Update 4 and it worked fine, but when I stop I get a black screen that says SYSLINUX 3.50 0x4625dbde EBIOSBoot error.
What I have:
ASUS M2NBP - VM CSM motherboard
4 GB memory critical
AMD X 2 AM2 5000 processor
160 GB WD HD
ESXi runs great until I reboot or shutdown, then I have nothing.
I guess the SYSLINUX bootloader is up again. I used to use Dban boot and nuke to erase a disc where some other OS was hung the boot sector
Burn the ISO on a bootable CD your ESXi host with this CD and run the autonuke, you just let it run for a few minutes and this drive is clean. Keep in mind that you will not be able to recover all the data.
Then reinstall ESXi and see if the problem persists.
Original title: xp does not start after the installation of avira
I have a HP Slimline s7410
XP Home Edition SP3
I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
I have a cd/dvd drive of work.
I don't have an XP bootable installation CD
My system worked well until: I installed the free version of Avira
Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.
Here's what my BSOD looks like:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)
Any help is greatly appreciated! :)
My first suggestion is to do a system restore at this time point.
second suggestion is to keep your external drive connected to the pc at all times. only detach when necessary. of course, it would be better to install a second hard drive in the computer instead. in any case, keep your personal files out of the system disk is a wise thing to do. You can also download and store files for free on the Microsoft Skydrive site.
third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month. Basically, you can open the Explorer and right-click on the drive letter. then select Properties, and on the Tools tab, you will have the opportunity to run the disk check. then reboot and do a Defrag. where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.
Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.
so my suggestion is to do a series of tests using your cd bootable your computer works. see if you can actually run a chkdsk/r at the moment with them. If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them. in any case, see if your boot at the moment media can run a check disk at all, and let me know.
fifth proposal is to install "microsoft security essentials" like your anti virus program. even if you have run ubantu, it is not likely to have been an infected copy. anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations. the people who make the virus deliberately their engineer for the windows operating system. If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too. Although they no doubt, attacks are more frequent for the windows os.
Two iMacs does not start after the 10.11.4 update. Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd. He then gets stuck in a loop trying to start. Tried to reset the SMC and LANDAU. Without success. Started in recovery mode and ran disk utility. Discs said OK. Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).) Installation is finished but still once does not start. Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater. Installation seems to work, but once again, the macs will not start. Same 'unexpected launchd sigkill' error. A mac is now back working properly with 10.11.3 the other will be shortly. Is there a problem with the accession? Our COMPUTER support use Munki to get updates from one day to the next. Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.
More information: two bricks iMacs were late 2013 models. A 21 "and a 27. We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.
I did a fresh install of windows 7 ultimate. Setup was good, he began, updated, installed some drivers and software, tried to reload and bad news. Restarting stopped with a white screen where the startup screen should be. I turn off the cpu and no problems at windows startup. I tried several times and no luck. If the restart from the menu start, it stops at the empty screen. "I seek answers and possibly other charges was installing, disabled all updates and disconnected all the printers, speakers, etc." and again not luck. After that first start and the processor does not start after a reboot. It stays on with a blank screen and no response to keyboard... Help, please...
I corrected this easy on my HP 7100
Go to management, records and defined as being active, then fixed, make a right click on the partition with windows on them might have to boot windows disk and choose repair option 2 times I found on a model of friends. Anyway, problem fixed, now able to restart (warm start)
A problem that I have not been able to solve and looking for help.
vCenter Server Service does not start after that Windows Server was P2V would be. We get an ERROR 2 of the Service. Get the error of the system Windows 7024 event log.
The client, I currently work with that tries to smash to the high location of the DEV VCENTER. Location of DEV vcenter works now all for this site (domains, dns and all development servers). If its VCENTER PRODUCTION of this location. Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box. Let's break the SSO, SQL and VCENTER in their own servers. However, the client wants to re - use the current physical server for SQL Server. So I need P2V physical server existing until I can start the new environment.
I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works. Fails every time with the 2 ERROR Code. I was unable to get a KB of VMWARE item that corresponds to the issue I'm having. ERROR 2 code has many articles and none have worked.
vCenter 5.1 Build 799731
SQL 2008 R2
Windows 2008 R2
When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)
Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code
When I saw the Windows system event log I get this error:
EVENT ID: 7024
The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...
When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)
2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects 
2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk
2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...
2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached
2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception
-> backtrace  rip 000000018018977 a
-> backtrace  rip 0000000180100 c 98
-> backtrace  rip 0000000180101fae
-> backtrace  rip 000000018008aeab
-> backtrace  rip 00000000005 b 4971
-> backtrace  rip 0000000000551298
-> backtrace  rip 00000000005516 c 9
-> backtrace  rip 00000000004c0fae
-> backtrace  rip 00000001405bbfb8
-> backtrace  rip 000000013f4b0078
-> backtrace  rip 000000013f4b016a
-> backtrace  rip 000000013f4b0279
-> backtrace  rip 000000013f4b0609
-> backtrace  rip 000000013f7f2903
-> backtrace  rip 000000013ff9e4b9
-> backtrace  rip 000000013ff9835c
-> backtrace  rip 00000001401b8a3b
-> backtrace  rip 000007fefedca82d
-> backtrace  rip 000000007783652d
-> backtrace  rip 0000000077ccc521
2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603
2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...
2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote
2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms
2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001
2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001
2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms
2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001
2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now
I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate. Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter. All Services have been changed for local accounts. All network and ODBC parameters are able to see the server... aka the server can see. I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...
Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems. Only when its summer P2V would have done that themselves.
I can't get this number. Need help.
In this case, we have finished rebuilding the vCenter and all migrate on. Wish had better put up-to-date, but ultimately, it's what has been done.
FF does not start after upgrading to version 27.0.1
Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214
Firefox 27.0.1 is too recent for me to know what unique issues it may have. I will message you a link to download the installer for Firefox 27.0 to see that the inversion or not the problem.
The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!
Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
Please report back to see if this helped you!
- Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.
ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 188.8.131.52, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).
Solution, according to this link, is:
If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Ok. Trying to fix a friend's computer and seem to have met a strange barrier.
Problem: The computer does not start after the bios screen.
Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well. And that's it as far as the computer becomes. After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect. I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point. I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected. Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success. I tried using a different memory stick and different memory as well... Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).
The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.
http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.
I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.
I have a pretty strong understanding of computer repair, so feel free to give me something to try.
If you need more information out of me, let me know as well.
Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.
At the back of the pc is the condition of the PSU led green or flashing?
I have a problem with my laptop.
It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).
I bought two modules and my computer does not start after changing them.
It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
2 x 1024 - did not work
1 x 1024 - did not work
1 x 1024 + 1 x 512 - working but not properly.
BIOS find that I only 896 MB (1024-128 for the video card)
I said OK. Let's see what will show windows. He was also 896 MB.
I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?
I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
Please someboy help me and tell what to do.
PS. the Modules are new and work correctly.
They have been tested.
Have you used two identical RAM modules?
What kind of modules did you use?
In my view, that the problem is related to the new, inserted modules.
There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.
According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.
Did you use these modules?
Hi, I am first time here.
I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.
Can anyone help me, please.
Post edited by: Marian ovidiu
The A200 series supports different chipsets;
Intel 945 PM
As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
Take a look at your laptop s user manual * Page 18.*
Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.
Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.
I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.
What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?
Thanks in advance,
I think that both modules are not compatible to the laptop.
Normally you can upgrade your laptop to 4 GB. Look in the user manual.
The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.
I have the same problem as this post 2013! Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.
I installed a new power supply (Seasonic 620W), which works well. I also installed a GTX 660Ti last year and it was works fine as well. I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.
My BIOS date is 2011.
Where can I find an update for this?
I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use. Should I do back up to 7 or 8? and then update the BIOS? Y at - it a update for my BIOS and where can I find.
In any case, I hope that this is a solution. Again, this is not a bad machine to be 5 years old.
Thanks for any help!
If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.
It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.
I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS. I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards. I would return to the map. Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.
ZOTAC (they don't say anything about their product vBIOS)
Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng
My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk. After removing the drive, the computer starts. I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?
Thanks for the info. I added the GPT to my search and discovered what had to be done in disk management. Here is a page with step by step instructions and photos. http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/
Maybe you are looking for
Yahoo mail compose page announced the Indian Railways. Same is the case with some Gmail site. For this reason, it is difficult to compose mail. I need your help to clear advertising so that I can compose mail on the blank page, cordially. Maes
Yahoo mail is normally empty. One can type mail in the blank part of . In my case the Compose page has rail logo. because I can't type my mail. Even if there is no problem in gmail-INBO isn't the case with Gmail site "A Google approach to email" or m
Hello friends, I am planning to upgrade my ASA 5520 with version 8.2 to 9.0, so I'll enjoy the benefits of anyconnect for mobile devices. Clearly, I understand that I must pay special attention to: NAT rules. Memory RAM: 2 GB. Add references to the r
Hi all Is it possible to export GBA network devices... ? We must do for our purpose of verification.
My creative cloud does not open and I tried to uninstall and it said its opening until its unable to uninstall. Help!