4540 proBook s mdt2012 net driver

I searched high and low for a solution and tried several different things, all for nothing will do. We have several new portable 4540 probook s and I'm looking to deploy using MDT 2012 windows7x86. I have uploaded the drivers to my host to deploy and rebuilt my images of pe, but winpe does not connect to my deployment share - error - the following pΘriphΘrique ParamΘtrage did not have a driver installed. I have double and triple checked the driver's inf file and it matches the PCI\VEN id on the material in the factory responsible for the OS. DRVLOAD refuses to load this driver when pointed at it. I use sp59118 for the realtek gigabit lan adapt. I tried the driver for our old 4530 s, and even if she is charged, I was still unable to see an inface or connect to the deployment share. Can anyone help with this? Please? My sanity hangs in the balance on this one. Thanks in advance.

John

Hello

I had replied to your post earlier, but apparently it never went through.

I tried my 4540 s here with my team multidisciplinary-2012 and it works very well. My litetouch.wim mdt is based on windows 4 and I to use the winpe driverpack sp60861 hp.

Note that there is also a winpe 3.x SP58992 form.

Could you let me know what version of winpe, comes your litetouch.wim?  WinPE 3or 4 x 86 or x 64

To try to reproduce your issue tro I tried the following:

  1. Extract p59118
  2. Has taken a fresh winpe 3.1 without any additional driver added
  3. Use dism to mount
  4. Then add the driver c:\swsetup\sp59118\WIN7\NDIS6\32\hp86win7.inf
  5. commit the changes and unmount the image wim

I then started the 4540 s that wim has successfully loaded the driver for the CARD, and I could connect to my server mdt-2012.

I also tried to start my 4540 s fees, vanilla, winpoe 3.1 x 86, then use drvload to load the hp86win7.inf driver does load successfully and again once I could connect to the server mdt-2012

So, I am sure that this driver is OK.

Could you tell me what version of winpe, you use?  3 or 4 also x 86 or x 64?

You can check that the correct driver is loaded in your Michael boot.wim file?  Use dism to get a list of driver and check if you see correctly rt86win7.sys

In addition, when you boot your mdt boot media, press F8 to get a cmd command prompt and do an ipconfig to check whether you are connected or not.

Also if you want you could send me (I can give you an ftp site) your wim file bootable and I could watch and I hope to resolve this.

Let me know

Tags: Notebooks

Similar Questions

Maybe you are looking for