4620 HP print from wireless then does not USB print
Product HP: HP 4620
Impression of the OSs: OSX (wireless), Windows 7 Home Premium (USB connection)
Problem: after that I have an OSX wireless printing, all future work print of the Windows 7 system sit in Quebec until the Windows box is restarted. All further work of OSX after work Windows are also qued.
Any help is appreciated.
Try to run the doctor print and scan and check the results.
http://support.HP.com/us-en/document/c03286146
Alternatively, you can restart you Printer Spooler to see if that helps. Do you know how to perform this step?
Tags: HP Printers
Similar Questions
-
Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work
Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.
With a wireless network test:
Wireless is on (but light indication only is not lit)
wireless network card has failed
"The wireless radio does not work. Contact Hp support.
Any help would be greatly appreciated!
Thank you
Smithb2
Hi smithb2, welcome to the forums there.
I saw your post on the wireless radio does not not on your model Photosmart C309.
I did some research and came across this post in the community that seemed to have worked for others with the same problem.
Re: Without the printer wireless radio does not
I hope that helps!
If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great Thursday
-
I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?
original title: wap encriptaciónHello
Maybe this can help.
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914
-
Wireless device does not work after downgrading from Windows 7 to Windows Vista.
Original title: wireless device does not.
recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?
If your computer manufacturer does not have Windows Vista drivers available, you're probably out of luck. Without drivers for these devices will not work.
'spyc' wrote in the new message: * e-mail address is removed from the privacy... *
recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?
-
My Photosmart c309a printer is not ALL networks.
-using the windows Vista
-four portable wireless maintain excellent connections to the home network
-a the recent failure of electricity, but all computers domestic mobile re-login to the network;
-a ran HP wireless network Test Report which shows wireless "On", but "The FAILURE" of wireless work;
-diagnostic report also shows wireless radio does not. and I have to contact HP support.
So far, I took the following measures:
-stop the entire network (Linksys router)
-unplugged and replugged the printer and router
-set factory default printer
-all I can think (but go ballistic)
I have a similar problem, except that my 309 a link but if it is idle for a few moments he log out and have to stop and reconnected or reset using the configuration menu. Contact with HP said that HP is aware of the problem but that he has no intention to post a fix and the problem is inherent in most of their printers... Techrep indicated that the best solution to get a new printer. I recently bought a Canon all-in-one and it works as advertised. I always use my HP in a wireless mode, but you need to restart after each impression if more that a few short minutes between printing. Sorry I'm no help, but just passing on what HP says about this printer.
-
HP c309a wireless radio does not, help
THX in advance for the help. I'm trying to set up printing from my IPad on my hp c309a printer wireless. Can't get it to connect. Just ran diagnosis on the printer wireless. Says ' wireless radio does not. Any help? THX
The Radio not work wireless message usually indicates a problem with the card wireless in the printer. I'll try to do a hard reset of the printer. A hard reset will attempt to restore the printer to a good working condition and no settings are lost with a hard reset. If the reset does not work then you can contact support at 800-474-6836. The link below provides warranty options.
Contact Hp outside the United States.
1. when the printer is turned on power, unplug the power cord at the back of the printer.
2. unplug the power cord from the wall outlet.
3 reconnect the power cord to the product and the wall outlet and then press the power button.
Let me know how it goes. -
Photosmart 6510e wireless radio does not
So far, I've only used the printer connected to a PC with a USB cable. I wanted to be able to print wireless with a laptop and tried to change the configuration of the printer by using the utility in the Help Center.
I received a message that the connection could not be made and to contact HP support. Unfortunately the warranty failed in September last without having tried me the wireless connection.
From the screen of the printer, I printed Test results wireless network which said that ATTENTION the wireless radio does not work. Contact HP support.
This would involve replacing a part and how big a job is? I did a number of repairs on the equipment myself before.
Hello elainetw,
Please try the below mentioned steps...
1 > while the printer is turned on, button on the wireless on the screen of the printer icon.
2 > then press the DEFAULT NETWORK
3 > after awhile, turn the printer off. Wait 30 seconds. Power to the printer.
4 > press the icon on the screen of the printer and then wireless active wireless Radio.
5 > now hit the 'Test of Wireless Print report' and enter the values for ON Wireless, works wireless and wireless network detected.
-
create a pdf from a scanner does not black and white?
create a pdf from a scanner does not black and white? Acrobat 9 pro only allows a customized analysis?
Hi mikes84641121935 ,
Acrobat 9 is not compatible with Windows 10. It may or may not work.
Please refer to this article: Adobe Acrobat required configuration
You can launch the scanner interface by going to the start menu or the control panel. When you first connect your printer/scanner to your computer via USB or wireless, the scanner driver to install and can scan from its native interface. You can find it in all programs in the Windows Start menu.
By ex. If you have HP Scanner, click Start and type hp scan. Also, you can go to control panel and can run the scan from there function. Hold down the Windows key and then press R on your keyboard, type of control in the run, find dialog box, and click on devices and printers > select your scanner and right-click on it. Try scanning from there and let us know if you are able to do.
In addition, you can try to repair Acrobat installation, launch Acrobat and go to the Help menu > and click on repair Installation, after repair, restart Acrobat and check if you are able to scan.
-
Satellite Pro L40 - wireless adapter does not work - Vista
I recently had some problems with my laptop.
A couple of weeks, I put in a disc of OpenSuse.
It's not stable anything, but locked me out of my original Vista operating system.I reinstallled Vista Home Basic, but there are a few problems.
Mainly, my wireless adapter does not work.When I flip the button to turn it on nothing happens and it is not recognized in Windows.
I installed Atheros Driver, but still nothing happens, light is not yet.Any advice?
Hello
First check the device-> network adapters area manager
You see the WLan card? Or the unknown device appears?If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.
Remember that your wireless network card? Maybe it was a Realtek WLan card?
If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page
-
HP ENVY 7640: wireless radio does not want 7640
Buy this printer recently worked for about 20 minutes. The printer says THE WIRELESS RADIO NOT FUNCTIONING. Advice or should she be returned.
Hi @HAYHEATH,
Thank you for visiting the Forums from the HP Support! I see that you have found a "Wireless Radio does not" error message on your new HP Envy 7640.
Contact our technical support HP 800-474-6836 because this can be a hardware problem. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
I hope this helps!
-
Pavilion DV6 6c14nr: Wireless button does not work
Has taken the plung and improved my DV6 Win10 laptop to see how it works. Had to do a clean install, because no upgrade would not work.
After installation, the wireless button does not work. LED stays red all the time, and when I push it, it activates / deactivates the airplane mode.
Check the support site HP for this PC, downloaded and installed the driver wireless Win8 button (sp59835) and it does not work. Button LED stays red.
Searched these forums and found another driver (sp64043) from the button for Win10 wireless driver and installed it. Still does not work.
Information on equipment is: ACPI\HPQ6001\2 & daba3ff & 0
The details for the wireless button said drivers this devide requires additional installation
Unless I can get the wireless button to work, I'll be forced to go back to Win7.
Help, please.
UPDATED - so others find this post know what works!
Restored image backup Win7.
Disconnected the LAN cable and activated the wireless button.
Win7 removed and properly installed Win10.
Wireless button works NOW!
So basically, if the wireless is turned off before the Win10 install, it remains disabled and then nothing will allow it.
-
Interruption due to the light wireless wireless connection does not illuminate
I have a 4330 s HP's Probook
I can't connect wireless in reason, wireless led light does not activate, I don't know if I need a driver, but I guess that all drivers are real.
hope someone can support me in this case.
Thanks in advance for your support
Original title: wireless connection
Hello Ruka,
Thanks for choosing the Microsoft forums.
I understand that you can not connect to the internet using the Wi - Fi connection on the computer.
I would like to know some information about the problem so that we can help you further.
You did it all change hardware or software before this problem?
Try the following and see if they work for you.
Make sure the wireless, as the function key switch for the wireless is turned on. Please refer to the user manual that came with the computer.
Method 1.
Try to use the network for Windows 7 troubleshooting:
http://Windows.Microsoft.com/en-AU/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2.
Please try to look in the Device Manager for any exclamation point in Device Manager.
Check the network card
1. click the Start button picture of the Start button, type "device manager" in the search box and then in the list of results, click on Device Manager. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2 expand adapter option and then check for any point of exclamation.
Is there an exclamation point on found network adapter, then we troubleshoot the missing or corrupt wireless drivers. And we must also update the latest driver wireless from the manufacturer's Web site.
To install the latest drivers for network adapter from the computer manufacturer Web site:
Method 3
Wireless and wired network problems
Method 4.
Why can't I find a wireless network?
http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
Additional information:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-7
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/wireless-networking-FAQ#1TC=Windows-7
Wireless light does not illuminate
Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.
Thank you.
-
Original title: I do not see my available networks
I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service. Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity. Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)
Hello
1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
2. do you have security software installed on the computer? If Yes, is it updated regularly?3. have you done any software or hardware changes on your computer before this problem?
4. What are the troubleshooting steps you have tried to solve the problem?
Refer to these methods.
Method 1:We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.
(a) click Start, type Services.msc and press enter.
(b) locate the autoconfiguration WLAN service, double-click to open its Properties window.
(c) on the general tab, change the Startup type to Automatic and click on the Start button.
(d) click apply and then click ok.
(e) try to connect to the wireless connection and check the result.
See also:
For more information on the wireless settings, see this link:
http://TechNet.Microsoft.com/en-us/library/ff802404.aspx
Method 2:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
See also:
Windows wireless and wired network connection problems
Check if it helps.
-
"Show my windows and tabs from last time ' does not work in version 3.6.8
I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.
I tried this on two different computers. Both of them have the same problem.
It worked fine in previous versions, but it does not work in version 3.6.8.
If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.
-
HP Photosmart 5520: wireless radio does not
I can't connect to my router. I run a wireless network test and he said that WE wireless... PASS, but he also said "the wireless radio does not work, contact HP support.
Please advise...
Not good. It seems that your radio wireless the printer is dead. If the unit is under warranty, you need to call HP.
What you can do, is get a USB print server and convert the USB connection to a wireless connection. However, check the prices on these devices because it may be better just to get another printer because they are so cheap.
Or just use your USB connection.
Maybe you are looking for
-
Help! C7280 wireless not connect to imac with osx 10.4
Here's my problem: my imac does not print with my new c7280 via the wireless network, but will my MacBook. But it's more complicated, the imac will print a page of test very well, everything said the link is fine (force), until I try to print, say, a
-
How can I find the history of the app on itunes or the app store for my iphone 5? I got an iphone 5s and it broke... now I have another but want to see the history of my old phone apps.
-
Error code 646 with Office updates
code 646 error when you perform windows for vista was last updated to solve a security problem with office 2003 and set the junk e-mail filter. Another diagnosis did not work and I am never asked to accept the terms. have tried several times. Sometim
-
I installed windows vista service pack 1 as an update, and when I check the history update watch installed and successful, but when I go to update the system still gives it to me as if it was not installed. I installed again and it shows successful,
-
Original title: google update on startup, I get C:\Users\Jerrold\AppData\Local\Google\update\1.3.21.65\goopdata. DLL is not designed to run on Windows or commercial error what should I do to correct this? And what is the update anyway?