4620 printer

Similar Questions

• OfficeJet 4620: printer keeps going offline

  OfficeJet 4620 - printer keeps going offline.  If I turn it on and turn it on, it's online for a while, but it disconnects again.  My IPad can't print on it. My Windows laptop, 10 shows as offline.  I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline.  It is very annoying to have to reset the printer whenever I want to print to it wireless.  Is this to say that the wireless antenna is going wrong?  Should I buy a new printer?

  I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• HP all-in-one 4620: uninstalled 4620 printer but getting 'problem starting HPStatusBl.dll' notice at startup.

  I uninstalled the printer software HP 4620 on my HP computer running Windows 8.1. When you start the computer, I get the message "error loading c:\programfiles\hp\hpofficejet4620series\bin\hpstatusbl.dll" window message

  Hey @SteveJG,

  I would like to help you today to solve the 'problem starting HPStatusBL.dll' message that you get on your computer Windows 8.1. I understand that the uninstall your HP Officejet 4620 e-all-in-one printer has not made a difference. Just so you know, this error message is for a 'service' that Windows is trying to start it's related to the HP device. I just go and delete this file manually. Please follow the steps below.

  1. Open the Start screen by selecting the Windows button in the bottom left of your computer screen, or by clicking the Windows button in the bottom left of the keyboard, to the right of the Ctrl key.
  2. When the splash screen opens, type computer (can show that This PC)
  3. Click on the computer (or PC) to start the window
  4. When the computer window opens, click on the Drive C
  5. Click on users
  6. Click on your user name
  7. Select AppData
  8. Select roaming
  9. Select Microsoft
  10. Select Windows
  11. Select the Start Menu
  12. Select programs
  13. Finally, click Start
  14. You will see a shortcut here to monitor alerts - ink HP xxxxx. Right click on this and 'Remove' it.

  Once the file monitor ink Alters has been removed, restart your computer to verify that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• 4620 prints extra blank page except for her print header and footer on the blank page

  4620 all-in-one, I am trying to print an email from the firefox browser, there is only a single page, but the printer prints 2 pages. The second page has only a header and footer on that printer. I only want a page and select 1 page, but still.

  Hello and thank you for the HP forums. To resolve this problem, you must first restart your computer. Holder of restarting the computer, unplug the power cord at the back of the printer, while he is always under tension. Unplug the power cord from the power source and wait 30 seconds. Plug the power cord directly into a wall outlet (not in a surge protector) and connect the power cord to the back of the printer. Repeat the print job. If the problem persists, try using a different browser such as Google Chrome or Internet Explorer.

• 4620 printer cuts footnote

  How can I stop my printer 4620 to cut the bottom of the page when you print something off my computer?

  Hello

  I suggest to try a hard reset first.

  Hard Reset:

  Take out the toner cartridges.

  Unplug the power cord from the printer and the wall

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• HP Officejet 4620: Installation HP 4620 printer on Mac OS 10.10

  Hello!   I have a HP Officejet 4620.  My printer is fine, but my computer has stopped recognizing my printer suddenly about 6 months ago.  I thought it was the USB connection, so I bought a new power cord USB printer-computer, but it does not solve the problem.  I tried to install the software on my computer to see if I could get a recognition without wire between my printer and the computer.  When I installed it, I got a warning window saying that the officejet does that by 'Mac OS 10.5 - 10, 7'.  I noticed that my computer is Mac OS 10.10 Yosemite.  Is this the reason that my computer is not recognizing my printer?

  Thank you for helping me to recover my printer!

  @charisbrooke

  It's the driver for OS X 10.9 and 10.10

  http://FTP.HP.com/pub/softlib/software12/COL52003/MP-125737-3/HP-inkjet-SW-OSX-Mavericks_v12.34.40.dmg

  REO

• All-in-one HP Officejet 4620: printer problem

  Printer works fine with the office. When you try to print from laptop, black is faded or nonexistent. The colors are sometimes normal and sometimes faded. Are passed through the HP print and scan doctor including updated drivers and the problem still exists. It started when I replaced the black ink cartridge. HP used cartridge, not off the mark. Printer is set up with WiFi connection with a Belkin N600 router. Both computers are HP. Last screen with print and scan doctor says printer has some serious problems.

  Hi @freddie3,

  You know, even if the printer prints fine on a computer, I can't help but feel that the question has something to do with the printer itself. Let me explain; I wonder if when you print from a computer so the settings are grayscale, so 3 colors would be coming together to create a composite black.

  We will complete the recommended steps provided in the following document, this will help determine the root cause and can help to solve the printer prints a blank Page not printing black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series.

  If the problem persists, please let me know if the test pages have black ink on them or not. This will help me determine whether or not the problem is, in fact, the printer.

  Thanks, I look forward to hearing back on your part.

• HP officejet 4620 printing problem

  I use a HP Officejet 4620. The software is installed on a PC using Vista. I can print to it from my Ipad, but not one of my desktops. Help, please!

  Hey accents.

  I see that you have an impression of question from your Vista PC for your Officejet 4620.  How the printer is connected to the PC?  If network, then what was the last time your electric network configuration has been cycled?

  Follow these steps to reset your printer HP, your router and your computer.

• Hp officejet 4620 printer that I need to know where is the guide to the user and how to clean ADF

  Device's printer Hp Officejet 4620, I need to know where the user guide is? How to clean the ADF?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP Officejet 4620 e-All-in-One Printer - drivers and software
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5191646&LC=en&cc=us&DLC=en&lang=en&cc=us

  E-all-in-one printer HP Officejet 4620 - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=5191646&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 4620 printer won't print unless you cancel the print command

  My 4620 all in one printer is programmed to print he's non-stop on the number of print which was published. Wat alone to stop printing is to cancel the print order. How can I fix this?

  Hi macjudy450

  I understand that the printer keeps printing after printing the copies granted.

  I download and run the print and Scan Doctor to fix common printing
  problems.

  If you need assistance please provide the following so I can help you better.

  What operating system do you use?
  Here is a document to your operating system Windows.

  How is the printer connected? (USB, ethernet, wifi)

  What application you are printing from?

  Try another application to see if it does the same thing.

• Set Up for HP OfficeJet 4620 prints to fax only

  Try to implement OfficeJet 4620 wireless laptop running Windows 7.  Wireless set in place works.  When a document is printed, a fax page.  Document never print to the printer.  After you set up the printer name is preceded by FAX.  Have deleted the printer and re-installed several times.  Do not see possibility to do something different.  Any help appreciated.

  @GuyNameDavid, sorry that you experience this problem with setting up a default printer.

  Try uninstalling and reinstalling the software and drivers. Do you still have the CD?

• HP officejet 4620: hp officejet 4620 printer all in one

  series #CN33S210C8

  After 2 pages print, my printer stopped printing.  Then I changed my cartridge, when I tried to print again, I got blank pages.  Just installed a black cartridge genuine HP.  I cleaned the print head 2 x and still get blank pages.  Can someone help me with this problem.  Printer was purchased 7/2013 and I think I'm out of warranty.

  My printer has stopped printing - I don't get white pages.  I cleaned printer heads 3 x and aligned, but nothing works.  What do you think that the problem can be.  The printer goes through all the motions, but does not print.

• HP Officejet 4620 prints black only moroccoin pink

  I have used the printer maybe twice and now it will only print my BLACK images in pink. I tried to go to "Préférences" and change to "black ink only" but has nothing. All cartridges are installed properly, the ink levels are good, I printed a status report and the text came out in black. Just my images will not.

  You will need to do both: select plain paper (or whatever the document type you use) AND select levels of gray and black ink only printing.

  The black ink print head is designed for printing text and the droplets are much larger than those of the color print head.  To make the best quality print light areas are printed with colors unless you specify black ink only.

• Do my HP OfficeJet 4620 print in black ink only, permanently.

  I want my printer to always print in black only, on the quality of the project. I went to devices and printers > Printing Options > advanced and changed printing in grayscale only for "black ink". I also made the same change on the page I want to print and go CTRL + P > properties > advanced and making the same changes.

  However, my printer automatically returns to print in color after only a single document i.e. whenever I print a new document, the changes are cancelled and it is up to the color.

  It's much too much time to repeatedly change the settings everytime I have print something, I need to print about 70 separate documents every morning! How to make this change permanent?

  I use Windows 8 if that helps.

  Thank you!

  Hello MarkC-S,

  Welcome to the HP forums!

  I understand that you tried to change the printing parameters for "Black ink" only, but it is up to color ink. As you said, the print settings seem correct and it should stick permanently. How is the printer connected? USB or wireless? I recommend you to uninstall the software.

  Please follow this HP document uninstall programs and features.

  Then clean your Temp folder on your computer:

  1. On the keyboard, press the Windows key and the 'R' key, and then type %temp%. Press ENTER.
  2. Press 'Ctrl' and 'A '. This will highlight all. Right click on your mouse and select delete

  Now, install the full features on the site of HP software here. Choose your operating system that is appropriate; 32-bit or 64-bit. If you need help to install the software, please follow this HP document here. Choose your correct connection type.

  Once the installation is complete, please let me know if the 'black ink printing"stick this time!