4630 Officemate HP all-in-one: //TODO complete installation without a CD player

Similar Questions

• HP Officejet 4630 reprint e-all-in-one spent at the start of printing to the top of the computer

  I use my laptop (OS - Windows 7 64 - bit / Home Premium/Service Pack 1) with a wireless connection to my printer (4630 Officejet e-all-in-one).

  When I start my laptop, my printer reprints the last print job immediately.  It only started a short time ago - was incompatible at first.  I have recently authorized HP install an "update" & now it happens every time.

  I looked at the preferences panel & couldn't find any settings that would explain this problem.

  I have to "cancel all documents" (even if nothing is not) every time before I closed my laptop?

  I think that the problem is solved - I hope so.  I looked for a solution to the 'help' under 'network' since I use my printer via WiFi with my laptop.  He suggested to cut the power to the printer and the router.  After that, he stopped additional printing.

  So, your suggestion is substantially the same.  If I had seen your answer first of all, I have done as you suggest.

  Thank you for helping me to find a solution.

• 4630 HP e-all-in-one printer cartridge change

  Recently bought a HP 4630 e-all-in-one printer. When the black cartridge needed evolution for the first time I have been unable to get printing to work again.  It displays the message «the following ink cartridges need to be replaced...» "followed by a symbol of glass side means time.  I replaced both black and color cartridges, and they are both the correct number (61) for the printer.  No help available?

  Hi john1936,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with the printer and ink cartridges.  I have found a document that will resolve this problem. Please note that the title of the document does not list the error you have however it will solve the problem at hand.

  Please click on the following link that deals with a "missing cartridge", 'cartridge problem,' or "not compatible ink cartridges" Error Message is displayed on the control panel.

  I suggest also that if you have the printer power cable connected to a bar/power strip, please remove and connect it directly to a wall outlet. Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.  This document is generally for HP products even if a LaserJet printer for example the cottage.

  Please do not hesitate to write again for any further assistance.

  Thank you for your time.

• How can I uninstall the sidebar of all-in-one and completely disable "LyricSing"?

  The function of "all-in-one sidebar" offers redundant and confusing capacity that consumes valuable real estate display on my old (and small) monitor. The result is that it makes several important sites essentially unusable. Please help me get rid of it on Firefox 31,0 or allow the return to an older version of Firefox that does not include it.

  Similarly, "LyricSing" uses real estate display and also acts as a great popup generator. The path to "disable" and the "current status" switch does not work on my XP-based system.

  I strongly dislike (I'm being nice) IE and Chrome! Help, please!

  You can uninstall the extensions that are more, you need or want to use.

  • https://support.Mozilla.org/KB/uninstalling+Add-ons
  • https://support.Mozilla.org/KB/uninstalling-toolbars
  • You can enable or disable the power bookmarks bar by ' view > sidebar > bookmarks ' or 'Ctrl + B' (command + B on Mac)
  • You can enable or disable the sidebar story power by "view > sidebar > History" or "Ctrl + H" (command-H on Mac)

  The current releases of Firefox have a button ' show lateral bars > "in the palette to customize this feature is also in the history of bookmarks and buttons drop-down list (the latter in the list '3-bar' from the Firefox menu button).

  • Firefox '3-bar' menu button > customize
  • View > toolbars > customize

• HP Psc 1610 all-in-one: Hp psc 1610 without Windows installation

  I'm trying to see if my printer will be able to work without the Windows installation disc. I have a HP PSC 1610 all-in-one printer. I'll buy the cable from Sun to hang it to the top, but I can't find the drive mentioned in the installation program. I don't know if it makes a difference, but I have a MacBook Air with Windows. Comments would be appreciated for what I can determine if I need to buy a new printer.

  Windows 10 has a 1600 integrated printer driver, just us the option to Add a printer in Printers and devices.

• 6830E all-in-one: direct wireless installation

  try to use direct wireless for my all in one printer. The brochure says it is an option, but there is no option on the control panel of the machine to implement?

  bought for this purpose - can I leave the printer in my trailer on site and I just print from my laptop when needed? Help! (It works fine through my hotspot, but I prefer direct wireless.)

  Hi @ffej1,

  Welcome to the HP Forums!

  I appreciate that you try to set up the direct wireless functionality for your HP Officejet 6830 pritner, on Windows 7. I'm happy to help you!

  Please visit this site, HP Wireless Printing Center - Wi - Fi Direct and direct wireless HP, for more information on how to connect wireless Direct.

  For future reference, hereis the user guide for the your printer.

  I hope that solves your problem!

  "Please click the Thumbs up icon below to thank me for having responded."

• Reference the Dell Photo all-in-One Printer 964 Installation

  I have a Dell Dimension E310 and a Dell Photo all-in-One Printer 964.  I am running Windows XP.

  My printer was working fine, but the scan did not work right.

  I uninstalled Dell 964 printer to help to change / remove programs.

  I tried to reinstall Dell 964 Printer by using the Drivers and Utilities CD: printer all-in-one Photo Dell 964 CD came with my computer.  I had this CD for 6 years and have used it to reinstall the printer before.

  I put the CD in D drive.  Sometimes, it will open the installation box (sometimes it isn't) where I can choose to install to a personal computer or a computer on the network.  I click on personal computer and wait.  Nothing happens.  In the past this action begins the process of installing the printer.

  Sometimes, I put the CD in D drive and nothing happens.  In this case, I opened my computer then right click on the D drive (which shows the Dell CD).  I click Open.  Sometimes, the installation box opens.  Sometimes it is not.

  Sometimes, a box opens indicating that the computer has detected new hardware - Dell Photo all-in-One Printer 964.  Operating instructions say if ensure that the Dell installation CD is in drive D, and then click Next.  He moves to another window where it says that it is looking for the CD.  Just, it maintains the search but can't find it.

  My CD of Installation is worn?  Is that why the computer can't find it?  Or something else going on?  Download the software of the printer from the Dell website?  Can I get a new CD Drivers and Utilities: Dell CD 964 Photo all-in-one printer?

  I have a limited knowledge of the computer.

  I appreciate any help anyone could offer.

  Thank you.

  Hi ColemanCreative,

  Please follow the instructions mentioned in the link below to uninstall and reinstall the drivers for your Dell Printer 964. Make sure there is no document in the queue before you uninstall the drivers.

  How do I uninstall the existing printer drivers: http://dell.to/18M5Oki

  If the problem persists, follow the steps mentioned below:

  Click the link for the Dell 964 printer drivers. Select operating system (OS) Vista. Once the operating system is selected as Vista, you will see an added option to run a cleaning/Patch Wizard to remove the old Dell printer software. Run the hotfix and restart the system. Make sure that the USB cable is not connected to the computer when uninstalling the printer drivers.

  For installation of printer drivers Dell 964:http://dell.to/13u7fzp

  When the system has restarted, check printing software has been removed and then install the drivers for the same link mentioned above. This time, select the operating system such as Windows XP, which is the operating system on your computer before you download and install the drivers.

  Hope this solves the problem for you. Let us know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Series F-300 HP all-in-one: the complete elimination of HP F - 300 Series All In One Printer

  I can't remove all the F-300 series printer parts after deletion

  Hi @wnight1and welcome to the Forums of HP!

  I'd love to help you to uninstall the software using a more comprehensive approach. Have uninstall you with the intention to reinstall? Was - that thing a troubleshooting steps that you complete to solve a different problem? I will include the following steps to reinstall the software, but of course you can ignore them if you just want to uninstall.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > AIO_CDB_NonNet_Full_Win_WW_130_141.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• 4630 E OfficeJet all-in-one: scanner

  Greeting of the beautiful southwest.  My question is this.  My scanner worked perfectly, then it starts to crumple my paperwork.  What can I do about it.  I'm a little illiterate in computer connected. I bought it in 2014

  Hi @Carole_H123,

  Thank you for joining the HP Forums!

  I understand that the scanner in your printer HP Officejet 4630 is crease your paper. I am pleased to see that for you!

  A few questions for you:

  • What is the type/size of paper you are using?
  • You make copies and the book will come out the front of the printer wrinkled?
  • Lift you the scanner cover and out paper like crumpled paper?

  In the meantime, please consult this guide, a Message appears "Out of paper" on the control panel and do not Pick Up paper printer, because it will show you how to clean the rollers in the printer. " As well as this guide, scanning from the control panel, do as it will show you how to load paper into the scanner.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Hope this post is helpful and have a nice day!

• HP Photosmart all-in-One printer-D110a Installation failure

  After spending the better part of today trying to install this printer on my new Dell Inspiron 660 (Windows 7 Home Premium 64-bit), I'm ready to renounce HP printers.  This printer is less than a year and I had it installed on my old Dell Dimension, where he worked with the exception of not being able to to perform a scan of the touchpad.  A big disadvantage, since I had to go to the HP Solution Center and analyze manually.

  But let's go back to our days, I went through all the exercises on the HP support site, more than once, and installation has failed each time, "Fatal Error 1935" as well as MSI. Scan.  Since online search made me think that the 1935 FE could be a Windows 7 problem, I contacted Dell support.  Dell technology has been able to install the printer; He said that he install it in "compatibility" mode  How a normal user is supposed to know this?  There is something left on my desktop - PS_AIO_07_D110_Full_Win_enu_140_126.  I have to keep it?

  In addition, Scan always does not work since the touchpad.  Nor can I open the HP Solution Center.  It returns the message:

  "HP Solution Center cannot work because your device installation is not complete.

  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.

  If it does not complete the installation, or you do not have the CD, access the HP help files by clicking on the start menu. »

  I don't see any HP help files in my Start menu.  There is a HP folder in programs, filled with a ton of shit I don't need except for the simple instructions, basic to connect the printer to my pc.

  The installation has already been tried, more than once, with the Original CD.  The installation was already made, more than once, the option to download on the HP support page.  And with all the L4 uninstall, I probably restarted the pc more than 30 times today.

  And for growing more, my Temp folder is full of garbage, much of it with HP in the name of the file, as well as six 7z files *.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4023246

  Install and let me know the result!

  Have a great day and a great weekend!

  -Spencer

  PS you should not have to run in compatibility mode with the Win7 this softare, you have to do if the software you are trying to install is something like software WinXP (for example) on a Win7 machine.

• Pavilion a6200n: how to close Internet Explorer to complete installation of Adobe Flash Player update

  I was installing an update to Adobe Flash Player and got a notice to close Internet Explorer to perform the update.  Try as I might, I guess I couldn't close IE because the correct view comes back.  I even changed my IE to Google Chrome, thinking that would surely close IE, but I just kept the advice.  I would be grateful someone tell me how to close IE.

  Yes.  I have apopogize for not specifying the tab 'Prodesses '.  This is where you select Internet Explorer by clicking on it then choocing "End task" in the lower right corner.

• HP OfficeJet All In One 4635: HP officejet 4635 does not print

  Bought a new HP Officejet 4635 all-in-one today.  Installation is complete, do not print anything.  Run wireless on Windows 8.1.  The Test results wireless network print, says no problem found.  Unable to print from the internet, word or excel (from Office 365).  Already reinstalled printer twice.  I don't get an error message, the work appears in the queue but then disappears without printing anything.  I don't have Norton or MacAfee.  Help! I already spent all day fighting with it.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• HP 3050 j610 printer all in one

  I have a hp 3050 j610 printer all in one, the scanner scans without problem, but it will not be printed. I have this printer set in place on a wireless connection, can someone help me with this problem.

  What operating system do you use?

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://goo.GL/3DAkq

• HP Officejet 7410xi all-in-one error message '... .align right cartridge... "

  Printer: HP Officejet 7410xi all-in-one + CD of Installation

  Computing: Dell XPS 8700

  OS: Windows 8.1

  Question:  Printer error message... Align the cartridge to the right... "The right (black) cartridge is not empty.  He worked until the middle of print job.  Place another cartridge in printing is faded to the right and dark on the left with no error message.

  What is the difficulty that these cartridges are expensive!

  Hi @xandux,

  I see by your post printing went on the right side, you tried a new cartridge and have the same results. I can help you today.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Follow the steps is this document to see if it will help resolve faded printing.

  Missing, faded or dull colors.

  Print the self-test on the printer hardware to see if it's a hardware or software problem.

  You use genuine HP cartridges?
  What are the ink levels?

  Let me know the results of the test pages of the document.

  Good day!
  Thank you.

• Cannot sweep the all-in-one Officejet 4630

  Hi all - help needed please.

  Recently bought a printer all-in-one Officejet 4630 and had nothing but trouble, set-up and use it. After several attempts to put in place, everything is roughly in order, though I can't yet scan of the control on the machine Panel (I can scan only through "system preferences" under the apple icon).  Whenever I try to scan the engine control panel (and not through system preferences), using either the wireless network (Airscan or whatever it's called) or the USB cable, I have the following message on my laptop screen:

  Task is not available

  The task of "Photo (JPEG)" found on your device is not available on your system. Please select another task.

  The same thing happens if I try to scan to PDF. I use an old (c.2007 MacBook Pro) that runs the OSX10.9.5 Mavericks. Internet connectivity is not a problem because we have the right cable broadband. All I want to do is scan directly from the printer to my computer, preferably using a wireless connection. Help, please.

  Thank you

  Hi @nckbtlr and Happy Halloween!

  I'm sorry to hear about the problems you are having with your Officejet 4630. I understand that you are unable to scan from the front of the printer. I'd be happy to help you with this.

  In the spirit of Halloween, first I have to ask: what did the Mummy to tell the Agent from HP Support?    Let's wrap this case up!

  I suggest to uninstall and reinstall the software. Please follow the instructions below to complete a more comprehensive uninstall than basic uninstall. I know that these steps look long and convoluted, but I made it easy to follow and have confidence that these steps will solve the problem.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.