4645 Deskjet ink advantage: deskjet ink advantage 4645 ERROR

Similar Questions

• Ink system failure error Code 0xc19a0013 HP Officejet 6500 has

  Printer has stopped printing in black ink: get a gray tone or no impression.  Get higher up the ink system failure error.

  Reviewed the help pages and have installed new black ink cartridge, check the squares of all the cartridges, clean the print head menu Tools, removed the print head and cleaned manually, unplug the power supply etc. Considered the responses on the forum pages. A ran HP print and Scan doctor.  I consider when buying a new print head or a new printer, any other suggestions? It's only black ink.  I ran a test page and the black box of the ink is interesting: instead of going from the darkest to the lightest he's going from light to dark to light again.  Thank you, Sue S.-S.

  You're welcome Sue

  See post below on Bob soak the printhead...

  http://h30434.www3.HP.com/T5/other-printing-questions/Photosmart-premium-C309a-black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

• Ink system failure error 0xc18a0201

  After installing new ink cartridges provided with HP C7280 all in one ink system failure error 0xc18a0201 occurred.  Cannot find reference to this anywhere error code.  What is this and how can I fix it?

  I found this solution for... C5180 ink system failure, and assumed/hoped the firmware was the same... it worked!

  ***********************************************

  Press and hold the "left arrow" key

  Press the "Setup" key and release both keys.

  Display should say "enter special key Combo".

  Press and release the OK"" button.

  1. press and release the right arrow button until the display shows "Menu of theSystem Configuration'.

  2. press and release the OK"" button.

  3. the display should say "hardware failure status". If it isn't there already, arrow above for "Hardware failure status"

  4. press and release the OK"" button.

  5. display should say "hardware failure status: clear." Press OK to Erase".»

  6. press and release the OK"" button. Message becomes " failure State material (breakdowns) resolved." Press Cancel to continue.

  7. press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the " failureof the System ink " appears. DON'T TRY TO PRINT AT THIS STAGE.

  8. using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

  9. wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

  10. turn on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

  11. If the printer has already initialized, then go to the next step. If this is not the case, the printer will start the "ONE TIME INK PROCESS of INITIALIZATION". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

  12. to verify printer functionality print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use.

  NOTE: If the error is still there, or reoccurs replace the unit.

• 'ink system failure' error with code oxc19e0023 on a HP Photosmart Premium all-in-One Printer - C309

  'ink system failure' error with code oxc19e0023 on have a HP Photosmart Premium all-in - One Printer - C309g - did all resets and reinstall the ink also tried to replace ink with new carts HP... frustrated please help

  Have you tried the steps outlined in this article:
  http://support.HP.com/us-en/document/c03081973

  If not try the steps and tell us if it helps.

  Good luck!

• Printer HP Photosmart C6150 all-in-One. The Error Message ink system failure, error: 0xc18a0001

  I have a HP; hotosmart C6150 all-in-One printer. My magenta ink cartridge ran out of ink. Several days passed and I would like to select print using only black ink cartridge. Now my printer has stopped working. I now get the message ink system failure, error: 0xc18a0001. Just in from a new cartridge HP magenta ink and installed but I keep getting the consignment: ink system failure, error: 0xc18a0001. How can I get my printer working again?

  [Personal information]

  The printer service: to replace. If it's under warranty we achieve for you if you call 1800-474-6836. If you are not in the warranty, we offer a few solutions for you. We always have available agents. Please call anytime.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

• HP Photosmart D7360 ink system failure error: 0xc18a0206

  I tried to print a doc then do not use this printer for over a year. The ink system failure message appeared when I turned on the printer, so I replaced all the old cartridges with new ones. The message persists, and I can not print even a sample or Test page. My page to print remains in the queue. I tried to reset several times with the method of disposal of recommended power cord. Always with the same result, ink system failure error: 0xc18a0206. This machine is maybe just too old. After spending over $ 100.00 on new cartridges that would be very disappointing. I use a Sony Vaio under Windows 7 Home Premium laptop, but since I can't print a test or sample, according to me, that question must be in the printer.  I'm holding off on the sledge hammer method for now. Help, please.

  Hey hphippie,

  I see that you are faced with an ink system failure error code on your Photosmart D7360.  Looks like that sitting for a while can be brought to shame in the printer.  I recommend following the steps outlined in the document below link for troubleshooting an ink system failure error code.

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  Let me know how it goes,
  Jason

• Message 'Ink system failure' error 0xc05d1281 in Photosmart C7250 Printer

  First message was "cartridge after expiry."  I turned and turn on the printer. Tried to print again. New message has been

  'Ink system failure', I bought a new cartridge, installed, tried again, still 'ink system failure '.  The printer is a 3 in 1, black Plus 5.

  About 4 years.

  Hello rubadub,.

  Regarding your question, here is the troubleshooting HP article.

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  Ink system failures are usually in the ink cartridge, the print head or in the printer. Since you have already replaced the ink cartridge, the problem lies in the print head or the printer.

  The C7250 print head is permanent and cannot be replaced or cleaned outside the aircraft so there is not much we can do with working with her.

  Go through the article and follow the steps in the order

  1. remove the cartridges and install it

  2. use the automatic printhead cleaning utility (sometimes you may need to run this several times)

  3 reset the product

  4 maintain the product

  If the first three steps do not resolve the problem, there is not much to service other than the product. Return ticket if the first three steps help or do not help, maybe we can think outside of the box before going to the service, but we'll see if the standard general steps work.

• C6180 ink SYSTEM FAILURE error message

  IF ANYONE CAN HELP WITH THIS ERROR MESSAGE?  FAILURE of the SYSTEM of INK 0xc19a0035

  I HAVE A C6180 ALL IN ONE.               IT DOES NOT RECOGNIZE THE FACT

  THAT I HAD REPLACED A CARTRIDGE A MONTH AGO... HP brand AND NOW GET this MESSAGE.

  I RE-SET, CLEANED ALL THE CARTRIDGES AND TALKED WITH HP ON THE PHONE 2 X.   IT WORKS AGAIN FOR A SHORT PERIOD, THEN THE INK SYSTEM FAILURE ERROR APPEARS AGAIN.

  HP said I need a new?   It worked very well until this and always does this for awhile after you reset it, so can't understand

  Why should I go out and get a new one for this problem.  I hope someone can help!    Thank you!

  IS NOT THAT DEMAND THE DAY 'EXPERT' OF AID?  HAVEN'T HEARD ANYTHING YET!

  This same error started on my printer and eventually it would power on and off constantly. Apparently some defective components were used in the construction of the logic board (see photo). My C6180 there were 3 defective capacitors (the Green cylinders - breathtaking top indicates failure) and a 4th from the same manufacturer (TEAPO - many web references unfavourable to this manufacturer). I bought 3 x 330uF 16V and 1 x 680uF 10v rated at 105 degrees Celsius (total about 60cents). On the logic board, the capacitors I replaced are labeled C613, C614, C660 and C662. If you are not comfortable replacing components yourself (or is not a soldering tool), you will need to find someone who will. The repair time should be less than 30 min - I did it in 25 minutes with only a solder pen. This also fixed the ink the printer was to have system failures. A similar fix may apply to other printers.

  

• HP DeskJet Ink Advantage 4535: HP DeskJet Ink Advantage 4535 error Code

  Hello

  I tried to connect my printer to the new wifi and on the printer, the message of this code was displayed.

  You have no idea where is the problem? I rebooted the wifi router, but the result was the same.

  I thank very you much.

  Jan

  

  Hi @Maxan,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community! I understand that you need to connect your printer to the network wifi and you get an error message. I'll be happy to help you.

  A remarkable work has been done trying to connect your printer to the wifi network before posting your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills, and we really appreciate your relationship with HP. We greatly appreciate you for doing business with HP and consider a privilege to share this platform with you.

  For greater clarity, I would need more information to isolate the problem to be hardware or software related.

  Other devices connect without hassle to the same network?

  After restarting the printer without any communication with other devices, you get this error message, or it goes back to the home screen?

  Is it possible for you to try this printer on a different network?

  We will first do a hard reset: as follows:

  • Turn on the printer.
  • Wait until the printer is idle and silent before continuing.
  • Unplug the USB cable to the back of the printer. If your printer has a network or a wireless connection, leave it connected.
  • Remove the cartridges from the printer.
  • With the printer, unplug the power cord at the back of the printer and the wall outlet or power strip.
  • Wait at least 60 seconds.
  • Plug the power cord into the wall outlet.
  • NOTE:
  • HP recommends connecting the power cord printer directly to a wall outlet.
  • Reconnect the power cord to the back of the printer.
  • Turn on the printer, if it does not automatically turn on.
  • The printer may go through a warm-up period. The printer lights can blink, and transportation could move.
  • Wait until the warm-up period ends and that your printer is idle and silent before continuing.
  • Reinsert the ink cartridges, and then close the ink cartridge access door.
  • Then try to connect to the network and check if it works.

  Please refer to these links for troubleshooting more: link 1: http://support.hp.com/ph-en/product/HP-DeskJet-Ink-Advantage-4530-All-in-One-Printer-series/5447926/model/5447927/document/c00489814/

  Link2: This error could be a jam of transport also. Please visit this link: http://support.hp.com/us-en/product/HP-DeskJet-Ink-Advantage-4530-All-in-One-Printer-series/5447926/model/5447927/document/c04718263/

  Link 3: setting up the wireless printer: http://support.hp.com/us-en/product/HP-DeskJet-Ink-Advantage-4530-All-in-One-Printer-series/5447926/model/5447927/document/c04719556/

  I really hope that the problem is solved without hassle and the printer works great. I hope this helps. Please let me know how it works. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts in giving me a congratulations. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.

• HP DESKJET INK ADVANATAGE 3545: error message in my hp deskjet ink advantage 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP

  Hello

  HOW TO GET THE SOLUTION FOR THE ERROR ON MY HP DESKJET 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP

  Hello

  Please try the steps below...

  1. While the printer is on, remove the cartridges.
  2. Remove all sheets in the tray. Close the drawer.
  3. While the printer turned on, unplug the power cord from the back of the printer.
  4. Power Off the Wireless router.
  5. Wait 60 seconds.
  6. Plug the power cord of the printer.
  7. When you are prompted, install the cartridges.
  8. If the error persists, then it is a printer failure. Please call HP Tech Support for assistance.

  Support of HP technology (USA) 1-800-474-6836

• HP Deskjet Ink Advantage 1515: Error hpsu-0004

  When I try to use HP update software, it pops up a message with error "hpsu-0004"

  If you use HP Support Assistant software update, I suggest that you do not have.  It works well in some systems of Windows 8.

  As long as your printer works fine now, ignore the message.

• HP Deskjet Ink Advantage 3540th: ERROR CODE OXC4EB827FH

  During my statup printer
  error code displayed
  ERROR CODE OXC4EB827FHWLMICCI2 C

  GIVE ME QUICK ADVISOR I HAVE URGENT WORK ON PRINT
  THANKING YOU
  Yan Anand

  Hello @vikas99vickyand thank you for joining the HP Forums!

  Where do you see this error? It's on the computer, or on the screen of the printer?

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  Also, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  Please reply back to let me know if it helps. If you need assistance I will thankfully come back and do my best to help!

• HP Deskjet ink Advantage 4625: error msg is failed.

  Nice day

  I made a copy and accidentally lifted the top Scan scanner was a document scanning. Following the message on printer: Scanner has failed. You will not be able to copy or print.

  Could you please help with this problem. Thank you.

  Hello ilse77and welcome to the Forums of HP.

  I see that you are having problems with your scanner.  I recommend you to perform a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend the continuation of the procedure described in this paper on a "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy or Fax.

  If this does not resolve the issue, I suggest contacting HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

  Thanks for posting on the HP Forums.

• Not printing - USB attached deskjet 720c, made an error in HPVSCP50. DLL

  I see many questions like mine, but try to reinstall the drivers for WIN 7 64 Bit OS does not seem to work.  I went as far as the deletion of the HP dll and INI of C:\windows\system32\spool\DRIVERS\x64\3 files that have a date of May 2008.   Add new printer only get of me that these same PGE back.  My impression seems to work, goes to the spooler for device, shows on Quebec for a short period of time and can be deleted.  The journal of the err shows err:

  Log name: Application
  Source: Application error
  Date: 10/01/2013 09:26:58
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: John-PC
  Description:
  The failing application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  Name of the failed module: HPVSCP50. DLL, version: 1.0.0.6, time stamp: 0x4431bcd4
  Exception code: 0xc0000005
  Offset: 0x0000000000010af7
  ID of the process failed: 0x1bb4
  Start time of application vulnerabilities: 0x01cdef46b1720d89
  The failing application path: C:\windows\Explorer.EXE
  Path of the failing module: C:\windows\system32\spool\DRIVERS\x64\3\HPVSCP50. DLL
  Report ID: 2b8f5d99-5b3a-11e2-86d9-00266c264c16
  The event XML:
  "< event xmlns ="http://schemas.microsoft.com/win/2004/08/events/event">."

  I see other people having this problem but I can't seem to get the printer going on the new USB port on a new computer laptop.

  I don't connect when you said that a few post back as your printer is connected using a parallel to USB cable. Now that I have a better understanding of this aspect, I can tell you that it may not work again. Unfortunately, the type of connection that uses the printer is very outdated and is no longer supported because of the potential problems that may result. I'm willing to bet that the issue of installation does not deal with the laptop itself, but the laptop cannot communicate with the printer without communication problems.
  
  My honest suggestion is to check out some of the more recent deskjets or small officejets and see what we have available to replace this unit. Much product HP printers are now improved print quality, ink longevity and increased functionality (wireless, scanning, etc.).
  
  I hope I have shed some more on the issue.
  
  Let me know and have a great day!
  
  

• HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

  At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

  Have research all day but unable to know what means this error code.

  Hi @e-year-e.

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

  These error codes are caused by hardware or firmware issues.

  "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!