46TL968 boot image needs

Hey guys,.

my beloved toshiba 46TL968K has a few problems. TV always starts on the pc port, although there is nothing fixed. He also refused to let me click on anything in the installer; especially the reset is not possible to click. I have therefore no options just reset the TV. Everything is gray just when I touched the settings. Unfortunately, I tried a firmware to boot from another site. The blue screen appeared, the startet updated, but then he stopped at 37%. Since the incident, the TV freezes at the boot sequence. I see the Toshiba logo but nothing happens.

I used a 2 GB USB drive (Fat32) format. I think I need a new image of just "Refresh" the Toshiba. And so I'm here, in the hope a helpful hand.

Thanks for your help

Send me your profile facebook at [email protected] for faster conversations, a will, help you to fix your TV.
Best regards.

Tags: Toshiba

Similar Questions

  • HP 250 g4: boot image selected is not authenticated

    Hello, my computer has problems from the beginning. One day, I restart my pc and this appears:
    "Boot device not found.
    Please install an operating system on your hard drive
    Hard drive (3F0)
    The F2 System Diagnostics.
    So I did all the tests diagnostic tests and all translate "SUCCESS."
    I called support and they are sending me the two DVD «Recovery media for windows 10 products»
    I followed the instructions and put the first DVD, and then I started the pc. At first, it seems that the cd will then start appears this sentence "the boot image selected is not authenticated to. Press to continue.
    What could I do?

    Hello

    Try the following.

    Judgment of the laptop.

    Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

    Under the System Configuration tab, expand the Boot Options Menu.

    Select 'Clear all secure startup keys' and click Ok

    Select "load factory defaults keys HP", and then select Ok

    Save the changes that you exit the bios and try to re-run the recovery DVDs.

    If you still receive the error, return to the Bios Menu, System Configuration tab and expand the Boot Options Menu.

    Activate 'Legact Support' and save the changes that you exit bios - you will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

    Try to run the recovery dvd.

    Kind regards

    DP - K

  • Pavilion 17-g108na: selected boot Image is not authenticated

    Dear Sirs

    I provide a laptop HP with windows 7 in the course of running for my clients.

    I bought a HP Pavilion 17-g108na and bought Windows 764 bit on a DVD.

    When I want to boot from the DVD, I get the error message:

    "The boot image selected is not authenticated to. Press enter to continue. »

    Is someone can you please tell me what I should do to get windows 7 installed.

    This would be much appreciated!

    Best regards, Chris

    Hi Chris,

    If you want to install Windows 7, need to disable secureboot and activate the start mode inherited so he could run.

  • Windows 7 boot image

    Anyone know where I can find/download the windows 7 boot image?
    I was told that I could get it.

    My HARD drive died, and I need a new drive.

    Thank you

    I managed to find a picture ISO of W7 on the Microsoft site and managed to restart the system with a new drive.

    It's here: answers.microsoft.com/.../7d964b05-2be9-4800-bc7f-3ca30356fc3d

    You also need imgburn or similar to create startup file ISO files and burn them to a DVD.

  • The difference between an image of system of sfr and sfr boot image

    Hi all

    I use ASA 5525-X with fire power module. I met 2 new concepts when I upgrade the software for my module of sfr, which is the image of the system and the boot image.

    I would be grateful if someone can tell me what is the difference between sfr and sfr boot image system?.

    Thank you!

    Hello

    You will need to run the boot image on ASA, so that the SSD is responsible with the SFR image. The system image must run SFR services thereon.

    Reference: http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-service...

    Kind regards

    Aastha Bhardwaj

    Rate if this is useful!

  • Update CAN´t SRW2024 to firmware 1.2.2 without boot image "runtop_boot - 101.rfb".

    Hello

    I need a little upgrade to a SRW2024 assistance to the latest firmware.

    I started with the upgrade to v.1.2.2, but just started switch to reboot all the time, I flashed back to 1.0.0.86 xmodem console.

    On the FAQ of Cisco theres a guide how to change the SRW2024. The guide says that I have to update the boot image before flash image, but the boot image is not available on the download section of cisco´s more.

    Can you please help me with the boot image. (runtop_boot - 101.rfb)

    Thank you.

    Hello

    I hope you called the HWC, since they have not yet responded to this request.

    http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

    Best regards, Dave

  • Selected boot image is not authenticated. Press on < enter > to continue

    I just removed the stock HARD disc that came with my M4-1015 x and now I am trying to install windows 7 on the SSD that I replaced it with. However, when you start up I get the message "the selected boot image is not authenticated to. "Press on < enter > to continue" when the laptop tries to read the operating system from the disk. I've never seen this before... any help? (This is a legitimate copy of Windows 7 DVD)

    Thank you.

    I fixed it. Of the secureboot to activate and deactivate bootmode inherited so he can work.

  • "HP Pavilion X 360 13": HP Pavilion X 360 13 ' selected boot Image is not authenticated. Press on &lt; enter &gt; to continue

    Hi all! I was wondering if someone could help me. My laptop started to tell the boot image selected is not authenticated is and asks me to press on enter. However, whenever I do this, the laptop is just turns off. I have read through the forums and tried all unique methos. No matter what I do, I can't access and type of BIOS or diagnostic, everything I chose makes it go to this screen. If you could give me any help, I'll be very grateful. It comes preinstalled with Windows 8 and has since then been upgrade Windows 10.  Also, when I turn on the computer, I heard a strange buzzing of the mouse pad area, what is?

    Thank you!

    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Oops, I didn't add this.
    Oops, I didn't add this.

    Hey there! @mycatdaphne, thanks for the reply.

    Thank you to perform troubleshooting.

    As you mentioned that you still can not access BIOS.

    It's a hardware issue please contact HP support for service options.

    Link to contact HP: http://hp.care/2bkTGBQ

    Have a great day!

  • selected boot image is not authenticated

    I just bought a new HP ENVY-4 with pre-installed Windows 8.

    After a few weeks where it has worked well, the computer began to get into trouble. Then he simply did not start more. As I shitch, stay for a while with black screen and then a blue mask pops up saying 'the boot image selected is not authenticated to. Only chance is so press ENTER, then the computer off completely.

    I am hollow your forum and try to almost everything.

    Tools of recovery to run, but not to solve. After treatment, the problem is still there.

    I noticed that if I try to run the "repair of the problems at windows startup" tool, computer said it was not able to repair...

    I open BIOS and changed the relevant setting ensure also the start-up and mode inherited... the computer simply does not start!

    I finally re-formatted the french PC key to restart USB, (made with the HP support tool, when it was new)... same problem appear like I'm back!

    Can you help me please? 3 months computer brand is new and I really disappointed to trow away my money.

    Thank you

    effebbi,

    If your battery off not easily with a lock at the back of the laptop, you can hold the power button for 30 sec with the power cord removed to do the same.

    I would like to know how everything goes

    Nice day.

  • HP Pavilion 15 laptop: boot image selected is not authenticated

    When you turn on the laptop says «boot image selected not to is not authenticated...» "What do I do?

    It's your computer laptop one with a removable battery?

    Remove the battery, unplug the power adapter and press and hold the power button for about 15 seconds. That will reset the hardware of the laptop.

    Put the battery back in and press the power button.

    Post your results here if you please.

  • HAB check failed for start / could not validate the boot image

    Hello

    I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

    HAB check failed to start

    could not validate the boot image

    Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

    Are there opportunities for the device?

    If you can't make an external reset via hardware buttons, then your phone will have to service.

  • How to add the Boot Image (x 64) & Boot Image (x 86) in the deployment of the operating system in SCCM?

    A few reasons that I deleted these 2 options OSD a few days back, but when I tried to recreate these images make me some error messages.

    Error: Package information

    Name: Boot image (x 64)

    Version: 6.0.6001.18000

    Error: errors

    You cannot import these boot images. Only final boot images are supported. For more information, press F1.

    This question is a bit Advanced for response Forums.  I suggest you try the Microsoft Technet Forums (if it is more applicable to your situation):http://social.technet.microsoft.com/Forums/en-us/categories.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Deployment PXE OptiPlex 5040 problem | WINPE5.0 Boot Image SCCM 2012

    Not able to get the PXE working on 5040. It will download the SCCM DP boot image. Once it downloads, it does not start.

    Network driver is already part of the Boot Image.

    I know it's been a while since this was posted, but I was having the same problem as OP and had the driver of WinPE 10 pack already loaded in SCCM.

    Our 5040 are small FF and Intel I219 - V NIC.  I tried to PXE boot so I could install an image of company (Windows 7) on the workstation, but every time load WinPE it could restart because that were not install NIC drivers.  I checked the CARD driver has been added to the image start several times, triple checked it was the same driver on the Dell support site, tried a little more recent driver from the Intel site, even started in the OEM of Windows version and check the drivers - all were the same.  I even went as far as putting the drivers on a USB stick and load via the command prompt, but it just would not work.  On a whim, I loaded the drivers Windows 10 NIC in WinPE via USB and command prompt and that worked.  I guess it's because I'm using WinPE 10 but I've never had to do before.  The driver that I loaded was E1D65x64.inf - we use x 64, if you use x 32 I believe that the pilot will be E1D65x32.inf.

    I just did inject the new driver in to our boot image and I'll test after the local RFP PXE is updated.

  • Disk controller and raid in the solid state for the T3600 / SCCM OSD boot image

    I'm testing a T3600 for our society.  I'm planning our Win 7 X 64 top using SCCM 2007 image.

    I downloaded the drivers of ACR for this Dell system and imported the driver in a package and in the boot image, but when I start my system (WinPC) boot image can find the hard drive and fails immediately when you run the task sequence to install the image.  I restarted the WinPE disc and press F8 to get the prompt BACK.  When I used a part of disk and tried to select disk 0 there no drive to select.

    It's a single SSD drive in this system, so I turned off raid but I don't know if I have a few wrong settings in the BIOS or the firmware of the controller, or if I have the correct controller and the hard driver in my boot image.

    Someone at - it it works and could you tell me the settings that you used in the BIOS, controller and what drivers you used?

    Thanks for your help.

    I got it.  There are two drivers for the controller and I missed a.  It was the PERC H310 for Dell Precision.

  • SCCM 2012 SP1 boot image error

    Begun to address.
    Creating boot image.
    Copy of the WIM file.
    Mount WIM file.
    Mounted WIM file.
    Setting Windows PE system root.
    Set the root system Windows PE.
    Set the workspace of Windows PE.
    Addition of standard components.
    Add component: winpe-mdac
    Adding additional content to: C:\Users\sysjep\AppData\Local\Temp\16\u5llcxcu.kw3
    WIM of disassembly.
    WIM from the copy in the package source directory.
    Create a boot image package.
    Error when importing the sequence of tasks Microsoft Deployment Toolkit.

    Cannot insert OSD binaries in the WIM file

    Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException: The SMS provider reported an error. ---> System.Management.ManagementException: generic failure
    to System.Management.ManagementException.ThrowWithExtendedInfo (ManagementStatus errorCode)
    to System.Management.ManagementObject.Put (options PutOptions)
    to Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put (ReportProgress progressReport)
    -End of the exception stack trace internal-
    to Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put (ReportProgress progressReport)
    at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put)
    at Microsoft.BDD.Wizards.SCCM_ImportTaskSequenceTask.DoWork (SmsPageData smspageData, dictionary 2 data)

    Hi Sam,

    The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

    Keep us informed on the status of the issue.

Maybe you are looking for

  • Satellite L630 WiFi not connecting

    I just bought a Satellite L630 laptop PC series and find that it does not connect to my WiFi network at home. The computer sees the network as being available, and when I enter my password, it tries to connect, but said then it's impossible. I tried

  • Boolean type def button.

    Hi, I'm Korean. my English is "whatever. That's why I'm sorry. first of all, I want to do Boolean button type def. This isn't a problem. but make triangle shape. case of problem. Like this Red box is notihing. But if I click there, it is change to tr

  • What is the importance of buffers in the Acquisition of images

    I think the question is explicit. I select the function set up IMAQ1394. It includes a command to define the number of buffers, usually they implements buffer is more than a video acquisition and 1 in the acquisition of images (I quote examples). but

  • NI_report.lvclass of report generation

    I just upgraded from LV8.5 to LV2009 and when I tried to upgrade an existing application from LV8.5 to LV2009 I found that the improved report generator toolkit uses the NI_report.lvclass data type to identify existing reports instead of a reference.

  • How can I get her back solo?

    How to make his return after winning a game of solitaire?