46YL863: change TV channels - delay before the new image appears

Hope someone can advise me please on an "issue" that's appeared recently with my 46YL863 TV.
I say 'problem' rather than problem in case it's something to do with my settings, which is the cause.

When I change channels I notice that there is a delay of several seconds of the current image to the new. I narrowed down it to this happens only when you switch from a HD channel to a one SD card, or from a SD card on a HD.

In these circumstances the screen will first black, then blue and after a couple more seconds the new image of the string will appear.
Switch between HD or SD channels and the new image appears almost immediately.

This happened before the last two days, so either a fault has developed or I changed a setting in some way.

I tried other plugs of HDMI input and the situation is the same.
Any suggestions please?

Thank you.

> I tried other plugs of HDMI input and the situation is the same.
This means that you are using an external decoder which receives signals from TV?

Tags: Toshiba

Similar Questions

  • I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

    I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

    Please see that.

  • [3750 x] switch was able to start on the new image

    Hello

    I have updated the firmware of my switches 3750 x (19 switches in the Group 8 battery) with the new version. But 2 switches with a stack of 3 cannot take the last version. They are the same model, I do not understand why they cannot start on the new image.

    New version: 15.0 (2) SE7

    Old version: 12.2 (58) SE2

    Switches information

    17 switches that works

    WS-C3750X-24 15.0 (2) SE7 C3750E-UNIVERSALK9-M

    Revision number of the model: A0
    Motherboard revision number: A0
    Model number: WS-C3750X-24 t-S

    Of the 2Switches that does not work

    WS-C3750X-24 12.2 SE2 (58) C3750E-UNIVERSALK9-M

    Revision number of the model: A0
    Motherboard revision number: C0
    Model number: WS-C3750X-24 t-S

    It's the only different, I found between the 2 switches with all other switches,

    Loading images

    In step 1 it load the image, but it will not start and in the end, it loads the old image and boot top.

    Loading ' flash: c3750e-universalk9 - mz.150 - 2.SE7.bin "... @.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    @@@@@@@@@@...

    File "flash: c3750e-universalk9 - mz.150 - 2.SE7.bin ' unzipped and installed, point of entry: 0 x 3000
    execution of...

    "Loading Flash:/c3750e-universalk9-mz.122-58.SE2.bin"...@@@ ".

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    @@@@@@@@@@...

    The switch that has the latest version can not see the other 2 stacks. At the moment the only solution I found is the downgrade of the switch with version 15.

    Kind regards

    The latest version that starts with success on this device is 15.0 (1) SE3

    The 15.0 (2) * or 15.2. * the images do not start and lead the suspended device during the @ as stated above.

    So, it seems than Cisco already broken that in 2012. I almost can't believe it.

  • Problem change an internal hyperlink to the new destination

    I work with a document (77 pages) created originally to InDesign CS5.5 on a Mac.  I'm now working with her on InDesign CS6 on a Mac OS 10.7.4.

    I need to update the destination of many of the existing hypertext links in the summary document title.

    One of the problems is that the hyperlinks does not show that the document contains all the hyperlinks existing in the links Panel, which is strange.  When I export the document as an interactive PDF, the table of contents is linked to internal pages.

    Here are the steps I took:

    • I pointed out the existing text (hyperlink) in the title of the summary document
    • Choose new hyperlink Destination-> Type-> Page.
    • Select the Page #.
    • Sets the zoom value.
    • Save the document.
    • Export interactive PDF.

    The link does not update to the new page # I selected.

    I don't have the ability to create a new hyperlink, since it is grayed out.

    I exported as an IDML and repeated all the steps.  No difference.

    Any ideas what I am doing wrong?

    Kathryn

    If you create a Table of contents using the table of contents function, this operation automatically creates a hyperlink and the destination is defined when the table of contents. These hyperlinks do not show in the hyperlinks Panel, like the links created manually. You will not be able to reallocate the destination in Indesign. The TOC links are visible in Acrobat by selecting the Connector tool, and then modify the destination, but not recommended for the many changes of destination. Where the content has been moved to different pages ID and manual changes to the table of contents, the destinations of these hyperlinks are probably not correct. You can delete all the external hyperlinks and regenerate a table of contents with the new link and created destinations and see if that fixes the problem.

  • Changes color when I use the new export or re-export fast in 2015

    Hi, I just upgraded to Photoshop, 2015.  I noticed, that they put the "Save for Web" command as a feature of the legacy, so I tried the new export and re-export fast, but my images accompanying through radically altered color.  (I'm saving to jpg, maximum).  Some examples of what I mean.  However, if I use the legacy, save for the Web or save slot, the color is fine.  Anyone know what is happening with the new export feature?  Thank you.

    snowy_landscape_sm.jpgsnowy_landscape_sm2.jpg

    Wow. Just hours after my last answer, Adobe has released 2015.1 Photoshop, which includes an option convert to sRGB in the export as dialog box. So, if I'm right about the cause of this problem, just update to this new version and you can ignore my previous suggestions. All you have to do in Photoshop 2015.1 is to select the new option convert to sRGB and colors must be consistent when exporting.

  • Addition of the new Image and text to an existing Page created with Tables

    Work in DW 5.5

    I try to add a new image/link and a small amount of text to an existing web page that was created with tables and centered.  I use AP div tags. One for the image and one for the text.  Everything works fine, but I can't get the new anchor points and to re - center with the rest of the page.  I'm not able to get around the "absolute positioning".  I tried different solutions of various tutorials but I can't make them work with tables.

    Added items are a Facebook button and text.

    Go to: http://www.sugarhollowfarms.NET/index.html See the problem.

    Help, please. I'm not that experienced.

    First, make a back up of the page before you implement the changes below!

    Take the bit of code below to

    and insert it directly after the opening tag div FWTableContainer and before your opening table tag (see location below):

    Then add - position: relative; -to the css of FWTableContainer (as shown below):

    {#FWTableContainer209091602}

    / * The div master to make sure that our contextual menus get properly aligned.  Be careful when you play with this one. */

    position: relative;

    margin: auto;

    Width: 800px;

    height: 600px;

    text-align: left;

    top: 20px;

    background-image: url(images/homepage_new3.jpg);

    border: medium solid #336600;

    position: relative;

    }

    Edit the css for FBlogo to as below:

    {#FBlogo}

    position: absolute;

    left: 700px;

    top: 380px;

    Width: 91px;

    z-index: 1;

    text-align: center;

    }

    Edit the css for bodytext as below:

    {.bodytext}

    do-family: Verdana, Arial, Helvetica, without serif.

    do-size: 11px;

    line-height: 13px;

    margin: 0;

    padding: 0;

    }

  • Captivate 4: delay in the objects that appear

    I have a few objects in the image that I imported into my library and placed on slides, with options will appear after 0.0 seconds, without transition. However, when I run the project (like a preview or a published SWF file) there is a delay of 1 or 2 tenths of a second before the objects appear on the slide. Objects are PNG and GIF images. I tried the images BMP and JPG, just to see if it makes a difference, but it didn't.

    This problem happened to Captivate 3. Y at - it a setting I missed, or something I am doing wrong?

    -Stuart

    Hi Stuart,

    This seems to solve your problem in the example: the action of success on the buttons in the slide 1 slide 2 are on 'Continue', if you change it to "Go to the next slide" a blink seems to disappear. This is consistent with measures of success for other slides on click areas, where the question is not here. I can't explain why, but seems to work.

    Hope this is also the case for you?

    Lilybiri

  • Changes to a copy of the tracks also appear on the original.

    When I duplicate a track in multitrack view and then make changes to this new track in the waveform display, that changes are applied two original tracks and erode return to multitrack, including warnings on the two paths that synchronize can be lost, because I cut and pasted on the new track. I want to keep the original track intact. What I am doing wrong?

    You need to convert your video to a unique after that reproduce you them. Right-click on the item and select convert in single copy. It will then have a digital suffix appended to the name of the element to identify it, and it can be changed without affecting the original or other duplicates.

  • Put the new image into an existing project

    I need to replace an image I used a transition. This image will be hoisted from the side of my start page for my home page.
    Originally I've done everything the way I wanted then duplicated the State then I moved the items that will be shipped on the page or sunk into the page etc...
    but now the new imported image is only on a State. If I copy the image of the main report and paste the image to the start State and try to transition the image gets only a fade out selection in the timeline panel. Even if I move the image it will go away though. I want to steal the picture from the side.
    I think what is happening is that the image is more "linked" between States so he doesn't know where the graph begins and where it ends.
    It considers that its 2 different graphics. Is their a way to copy and paste a State in order to keep the association and create a transition?
    Otherwise, I have to redo work hours to replace an image?
    Help, please...

    Hi Curtis,.

    The transitions are between the same element (or "instance" to be fancy) when it has different properties (such as position, size, opacity, rotation, etc.) in different States. When you import an image, you create a new item in the Art Board. If you copy - paste, you create another element.

    If you want the same item to appear in several States, right click and choose "Share of the State" and the State you want it to appear in.

    There is also a "do this even in all States ' which makes an element have the same look in all the States present in.

    For your specific case, however, you are already working on an image, so you need to just change the image to have a new source of transitions. Click on the image that was previously working, click on the 'source' in the Inspector properties (at the bottom right), and you should have the ability to change from your image.

    -Bear

  • I've imported the new images from my camera and somehow deleted photos of my mother who were on the computer, how can I get them back?

    I need help, I imported the new photos and the next day my mother told me that she doesn't have a picture of him while he was probably because of me import new photos, I really need to get these old photographs, it is three years of images! It is a relief!

    1. download the free program Recuva by http://www.filehippo.com/download_recuva/ select a drive from the drop-down and click Scan to list everything > check Filename > Recover to recover all deleted files.

    2. in the alternative, the free food program here http://www.snapfiles.com/get/restoration.html

  • Problems with firefox, slideshow freezes before the last image

    Hello

    I use muse for the first time, the site is up and running on this page in Firefox V37.0.1 the slide show hangs before the end, so is not in the loop, it works very well in Safar/Chrome/UI and seems to work correctly on Firefox/Chrome/PC does anyone know a solution, difficulty, workaround, or is it just my Mac sends me some grief.

    The site includes several other slideshows that all work very well. It's that sends help commuting problems

    I deleted the cache/history... and it has not solved the problem.

    Any help is appreciated!

    See you soon

    Phil

    I tested it on Mac/Firefox, but do not see the same question that it works very well on my end:

    https://www.dropbox.com/s/3a92tb5kqlr7lpl/Firefox.swf?DL=0

    I suggest you to reset the preferences of the browser:

    Reset the preferences of Firefox to troubleshoot and resolve problems. Firefox help

    Thank you

    Sanjit

  • Y at - it a simple method to move the new images in an album existing?

    I don't understand why it must be so difficult just to get a new image into an existing album! It seems to me that Adobe has created a simple workflow method to accomplish this simple task. After watching of many FAQ questions / answers, it looks like a number of people have asked the same question but also received a large number of responses of type "get around" to move the images in an existing album.

    For example, one method was to create a new album with a smilar name, then merge the album into existing 'main' album. There must be an easier way to get this done.

    Thank you.

    Happy to help you.

  • Best PPI to create the new Image in Photoshop

    Hello

    Lot of questions - while "BOLD". I'm a bit new to CS5 and have been playing with making art in it. Yesterday, I created a work of art simply by selecting 6 inches by 6 inches in the dialog box (because I thought just printing at home and it sticking on a 6 x 6 canvas). He is lacking in 72 dpi / RGB as it always does, and I was fine with it when I started the piece and also because I post these works of art on my blog on the web.

    I am currently trying to art for permission to create and understand that I have to create things in mode CMYK for that (right?). I also understand that I should probably create a piece of PS to 300 ppi (or 355 ppi is the new standard?)

    I want to create art 12 x 12 photoshop windows ('size of the album') for manufacturers that will also allow the art to sample and down a bit (say up to 8 x 8 and up to 20 x 20). Is the best dpi, 300 DPI then to create the room to?

    In addition, it is possible to re - save the file to the web at 72 dpi / RGB to post on my blog? What is the best way to do this?

    Last question, I think, is that I need to print on my art on my personal printer (HP Vivera 4 inks) for shows has just shown and do not fear that it is the best of all possible impressions. Just a very good record of it for display purposes and of course, I don't want to go through a boatload of ink and spend 20 years waiting so he could get out of the printer, etc. can recommend the best configuration (CMYK? PPI?) Home-12 x 12 print this title?

    Thank you!

    Thus, a good idea would be to save all my PS files as file zipped

    There may be a bit of a misunderstanding here.

    A psd file is fine, but made may retain layers and also be compressed (this can be set in the TIFF Options dialog box when you save a tif) with LZW or ZIP, which are all two compressions without loss.

    The advantage would therefore be potentially less files but more long economy - and - hours, as compression is not' free '. "

    In any case, you would be well advised to save your work regularly.

    And another point related to the question of the size of the image:

    Vector masks are paths, so that they can then be resized and maintain sharpness. (see screenshot)

    Depending on the type of images that you do, for example, if you combine flat shapes quite stylized, they can be an option to keep in mind. Although this kind of illustration would lend itself more to be done in Illustrator.

  • The signature image appears in the actual signature.  Print Preview, it shows that?

    Hi, I'm very new to using Adobe and you want to use for electronic signatures to reduce paper

    and increase efficiency.  I could use help so that he can work with the display of my name.  I tried to change the signature to display an object, a file that displays my handwritten signature.  The overview shows that I have attached it properly, but when I try to sign a document he continues to show my name instead.  I tried several times, again.  Fixing .jpg then tying in a .pdf file.  The overview continues to show what it will look like, but still the default signature in my name to uppercase for a reason any.

    HELP the newbies to please.

    In the signature dialog box (which appears when you click the signature field) you see the drop-down menu allows you to choose the new signature?

  • I imported an EPS layered file in FrameMaker, but ONLY the EPS image appears in the PDF file. How to do everything to appear?

    I imported a file .eps (a barcode) in FrameMaker and found that the omitted PDF everyting but the .eps image.  How can I get FrameMaker to recognize the text and images in the file FM, as well as the image of layered .eps file in the output PDF file? To test this, I also converted the .eps file (in PhotoShop) for a TIFF, JPG and GIF, PSD and imported of each in the doc of FrameMaker and created a PDF file.

    When I imported the FM and PDFd .psd file, all of the text and images of the file FM appeared, but the bar code has low resolution.

    When I imported the TIFF records in FM and PDFd, nothing appears in the PDF file except the barcode image and the text block, to which it is linked. The bar code has low resolution.

    With a JPG image, everything appears in the PDF but the barcode has low resolution.

    With a GIF image, it appears in the PDF, but t barcode a low-resolution.

    First thing you should try is to create a PDF file of the EPS file using Acrobat only. If it does not come out as expected (in the PDF file), then you know exactly where the problem is. Create a PDF file of the EPS in Photoshop is not a good test.

    You also need to update your version of FM12 - you have a patch behind.

Maybe you are looking for