490 error code when you try to install service pack 2 with vista

Similar Questions

• 80070057 error code when you try to install Service Pack 1

  I try to install Vista Service Pack 1 and when I try to install it either online or manually by downloading the entire 400 + M file, it will start and show 10 minutes later the installation failed with code 80070057 error and.  I can't find this code on a Microsoft Web site reference.  Any idea what's going on?

  Thank you

  A long shot, but try it (even if it's for Windows Server 2008). Stop mentioned serivce and run Service Pack 1 Setup.

• Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

  When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

  I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

  So far I have tried:

  1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

  2. I ran sfc/scannow in the administrator command prompt

  3 run the windows update utility for troubleshooting to solve all the problems

  4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

  5 disabled and re-enabled BITS

  6 downloaded the stand-alone manual update, installation failed the part of the way by

  Here is the reading for the Checksur.log

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-03-29 20:20

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
  (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
  (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

  Summary:
  Seconds executed: 419
  Found 3 errors
  CSI identity lack Total count: 3
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Do a repair of Windows 7 installation and then install SP1.

  Windows 7 - repair facility
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• I get the 490 error code when I try to install service pack 2 for windows vista. Anyone have any ideas on how to solve this problem? It is very common?

  Please help me with this problem.  I know that it is very important to keep your computer up to date.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 80073701 error code when you try to install KB2378111 update on Windows Vista

  When you try to install the update KB237811 on Vista 32-bit, I said it has installed successfully, but I have to restart my computer.  After the reboot, I get a message that the installation has NOT been successful.  I tried to install this update three times, and I still get the same error code: 80073701.

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• Error code 800F0811 when you try to install service pack 2 for vista

  Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

  When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

  Hello

  Review the information in the site mentioned below that can help you work with the question:

  http://support.microsoft.com/kb/947366#resolution3.

• Auto Installer error msg when you try to install security pack 1-windows vista premium home edition

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Update of programs you have problems with Windows vista security pack 1
  • Installation error messages fails
  • Recent changes made to your computer - none
  • What you have already tried to fix the problem-read on problems - tried to use such automatic installer recommended

  Hello

  This problem may occur if one of the following conditions is true:

  ·  A program on your computer interfered with the installation of the service pack.
  ·  There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  See this article for this problem:

  How to fix the Windows Vista and Windows Server 2008 service pack installation issues:
  http://support.Microsoft.com/kb/947366

  Additional information:

  What you need to know before you install Service Pack 1:
  http://support.Microsoft.com/kb/936330

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions:
  http://support.Microsoft.com/kb/959064

  How to obtain the latest Windows Vista service pack:
  http://support.Microsoft.com/kb/935791

  I hope this helps!

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• get the 490 error code when you try to install the update net framework

  0000490

  Hi harry_m,

  You are able to install some other updates of Windows on the computer?

  Please provide compete the error message you receive and also specify Windows Edition\Version you are running on the computer, for a better understanding of the issue.

  I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run (Checksur.exe) system update readiness tool

  Follow the steps mentioned in the link (method 1) below, and then try again to install updates

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 8024200d when you try to install service pack 2 on vista 32-bit

  SP2 and run system update tool update always fails.

  Hello

  **********************************************
  Rename the folder Catroot2 rename the Catroot2 folder (Windows XP and Windows Server 2003 only) and then try to install the program again.

  Note Skip this method if the operating system is Windows 2000.

  To rename the Catroot2 folder, follow these steps:

  1. Click Start , click run , type cmd, and then click OK .
  2. At the command prompt, type the following commands and press ENTER after each line:
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  3. Remove all tmp*.cat to the following folder:
     % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

     If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
  ***********************************************
  Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 /u softpub.dll
     regsvr32 /u wintrust.dll
     regsvr32 /u initpki.dll
     regsvr32 /u dssenh.dll
     regsvr32 /u rsaenh.dll
     regsvr32 /u gpkcsp.dll
     regsvr32 /u sccbase.dll
     regsvr32 /u slbcsp.dll
     regsvr32 /u mssip32.dll
     regsvr32 /u cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  3. Restart your computer.
  4. Click Start , click run , type cmd in the Open box, and then click OK .
  5. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 softpub.dll
     regsvr32 wintrust.dll
     regsvr32 initpki.dll
     regsvr32 dssenh.dll
     regsvr32 rsaenh.dll
     regsvr32 gpkcsp.dll
     regsvr32 sccbase.dll
     regsvr32 slbcsp.dll
     regsvr32 mssip32.dll
     regsvr32 cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
     Restart the computer.

  ***********************************************
  Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands, pressing ENTER after each line:
     attrib s h % windir %
     attrib s h %windir%\system32
     attrib s h %windir%\system32\catroot2
     output

  ***********************************************
  Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

  To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

  1. Remove all tmp*.cat of the following folders:

     systemroot \system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

     systemroot \system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  2. Delete all the kb*.cat files in the following folders:
     % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
     % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
  3. Remove all the oem *. * files in the % systemroot % \inf folder.
  4. At the command prompt, type the following commands. Press ENTER after each command.
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  5. Restart the installation of the patch failed or the installation of the service pack.

  ***********************************************
  Empty the software distribution folder

  1. Click Start , click run , type services.msc and click OK .

     Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.msc and then click run as administrator .

  2. In the Services (Local) pane, click automatic updates , and then click stop .
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. In this place, the drive is a placeholder for the drive where Windows is installed.

  5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates , and then click Start .
  7. Restart the computer, and then run Windows Update again.

  ***********************************************

  It may be useful

• 80070490 error code when you try to update service pack 2

  try to update vista (not preloaded on computer so no seprate disk) get this message when trying to install the update need help to repair as soon as possible as Ive noticed that helps ends after the 13th for people who have not updated

  Thank you very much, Lee

  no anti-virus at present

  Yes already expired norton 360

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Note: The manufacturer was required to provide a way to reinstall Windows. If a set of disks came with the computer, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install. Contact the manufacturer for guidance.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck. Wish I had better news for you.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get error code 80042306 when you try to install Service Pack 1 for Vista Business

  Am linking to get my eccentric Vista to work properly. Try to get the notice of failure load and obtaining of the SP.

  alabamacoasty,

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  System File Checker

  The system update tool

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• get 80071AA7 error code when you try to install windows vista sp1

  get 80071AA7 error code when you try to install windows vista sp1

  80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
  The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

  (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
  How to perform a repair for Vista Installation

  All personal data will be kept. All updates applied previously will need to be reinstalled.

  (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

  3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

• 64 c the error code when you try to install windows update kb2505591

  Why do I 64 c error code when you try to install windows update kb2505591

  Hello

  The kb2505591 is for the download of Bing Bar 7.0.

  You can try the methods provided below to solve the problem and then try to download the update for Windows.

  Method 1:

  I suggest to reset the Windows Update components and check if that helps resolve the issue.

  http://support.Microsoft.com/kb/971058

   

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

  http://support.Microsoft.com/kb/2505591

• 80070490 error code when you try to install kb967723, kb970430, kb972145 I Norton is turned off, the firewall is disabled

  80070490 error code when you try to install kb967723, kb970430, kb972145 I Norton is turned off, firewall is disabled, I tried an update installation but only have a update disc and it turns this function when I try to reinstall vista full... I don't know what to do know... any ideas?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner