490 of the code when you try to install windows update

Similar Questions

• 64 c the error code when you try to install windows update kb2505591

  Why do I 64 c error code when you try to install windows update kb2505591

  Hello

  The kb2505591 is for the download of Bing Bar 7.0.

  You can try the methods provided below to solve the problem and then try to download the update for Windows.

  Method 1:

  I suggest to reset the Windows Update components and check if that helps resolve the issue.

  http://support.Microsoft.com/kb/971058

   

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

  http://support.Microsoft.com/kb/2505591

• 800b0100 error code when you try to install Windows updates KB974145 and KB978251

  Greetings and salutations:

  Any help would be appreciated.

  I tried to install these 'important' updates several times with the same result - updates failed, error 800b0100 code. I downloaded and installed the KB974821 tool - tells me it installed - same problem. (I don't know if I'm supposed to do something else with KB974821 - I have to "run" or just "installed" it enough?) Instructions could certainly be clearer)

  I tried to download and install the updates manually - without success - I get various error messages, like "does not apply to your system" or "for a different hardware platform.

  I tried this with my firewall/antivirus close as well - using Trend Micro - and still no luck.

  Thoughts, comments, suggestions, help? Very much appreciated. Thank you.

  
  

  BTW, I'm running VHP 64 with Service Pack 2 installed. Nothing should be this complicated or frustrating.

  Additional information:

  In another forum, where I posted this inquiry (I was told is the right place to post it here) I was advised on how to get the results of the KB947821 tool that I ran.  (Why this information was not given instructions on how to use the tool is beyond me). Here are the results of the analysis, apparently:

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking
  (f) amd64_bthmtpenum.inf_31bf3856ad364e35_0.0.0.0_none_7ff053f99479855b CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.bthmtpenum presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdfs.inf_31bf3856ad364e35_0.0.0.0_none_a5e566b2d3236f6d CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdfs presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtp.inf_31bf3856ad364e35_0.0.0.0_none_9f92d6d487384aad CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtp presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtphw.inf_31bf3856ad364e35_0.0.0.0_none_78371ba92ff2a242 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtphw presence of registry package failed, possibly an orphaned package on package watchlist

  Checking packages

  Control components store

  Summary:
  Seconds executed: 1695
  Found 4 errors
  CBS Watchlist component lack Total count: 4
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  So apparently the errors were detected. What they mean and how to fix them? Thank you!

  Hello

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Get 643 and 646 error codes when you try to install Windows Update. Everything else works with updateing, Itunes and other updates, but not Microsoft. I did what is listed here as much as I can understand, but still have the problem.

  Every time my computer upgrades, they fail to install.  I tried the fixes on the web site and still have the problem.  Errors are 643 and 646.  I continue to download and and keep not install correctly

  Hello sugarlake,

  Thank you for using the Microsoft answers Forums.

  Solution for error 646:

  Disable all Firewalls and try to install the updates and the stand-alone installation (download manually).

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Restart the computer after the update is installed.

  Also check with

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  http://support.Microsoft.com/kb/822798

  That should solve the problem.
  _________________________________________________________________

  Solution for 643:

  It is a common problem with the updates of the .NET Framework.

  http://support.Microsoft.com/kb/923100
  http://support.Microsoft.com/default.aspx/KB/976982

  http://www.networknet.nl/apps/WP/archives/324

  Follow the steps in the web links above to solve the problem.
   
  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• When you try to install windows update I recive 0 error code 80070424 x

  When you try to install windows update I recive 0 error code 80070424 x

  Hello

  You can follow this link & check if the problem persists:

  Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updates, or when you start Windows Firewall

  Hope the helps of information.

• get 80071AA7 error code when you try to install windows vista sp1

  get 80071AA7 error code when you try to install windows vista sp1

  80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
  The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

  (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
  How to perform a repair for Vista Installation

  All personal data will be kept. All updates applied previously will need to be reinstalled.

  (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

  3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• 00643 error code when you try to install important update __WHy?

  Several times the same error code - tried this only started recently - what am I doing wrong? Can someone help me please

  Operating system? Update in question?

  1 Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  2. Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  3. you receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  4. you receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  and finally -.

  5. When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  and/or

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• 80073701 error code when you try to install KB2378111 update on Windows Vista

  When you try to install the update KB237811 on Vista 32-bit, I said it has installed successfully, but I have to restart my computer.  After the reboot, I get a message that the installation has NOT been successful.  I tried to install this update three times, and I still get the same error code: 80073701.

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• Error 80246007 code when you try to download Windows updates

  Original title: 80246007

  I am trying to download an update from windows, but get the error 80246007.  I have follewed the instructions to fix the problem and then tried to download it again and get the same error code of suggestions as to what I should do

  Hi rayman9301,

  1. what Windows operating system do you use?

  2. what steps all you tried to solve the problem?

  3. have you tried to install the updates manually?

  4. When did you start to question?

  Method 1:

  You can check out the following link and check if it helps.

  Windows Update error 80246007

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80246007

  Method 2:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  You try to install the updates manually from download from the Microsoft Download Center and check if it helps.

  Check out the link:

  http://www.Microsoft.com/downloads/en/default.aspx

  a. double click on the downloaded file.

  b. you can either click Run to start the installation or you can click on save and save it on the desktop and run the installation once the update is completely downloaded.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 80070490 error code when you try to install windows vista sp2

  OK JUST LISTEN UP GUYS I REALLY REALLY NEED HELP!

  OK to start with I have a 32-bit with sp1 operating system.
  I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.

  It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?
  I HAVE A DVD OF WINDOWS, SO IT WON'T WORK

  SOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ITS REALLY ANNOYING
  

  Hello

  1. who is the antivirus installed on the computer program?

  2. What are the steps you tried to solve the problem?

   
   
   
  Download and install the update the system analysis tool
  80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/976920
   

  Search for the error message in the event viewer.

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Original title: problems with updates

  I tried to install windows updates since the store won't let me update to 8.1 otherwise, but I've been miserably lacking 4 days in a row now. Commissioning Windows Update in Control Panel or the charm of parameters found 133 available updates and informs me that they will install automatically. If I then try to install progress remains at "downloading 0 KB", after a while updates are shown as installation. When the installation is completed I'm prompted to restart my pc. After the reboot if I'm greeted by the "Failure configuring Windows updates" screen for about an hour, then I'm able to reconnect to the desktop computer. I've been searching the forums for similar problems looking for an answer and trying different solutions, such as:

  Stop the update service then renaming or deleting the folder C:\Windows\SoftwareDistribution. No positive results on this one.

  Using SFC and DISM, first came up with my system is clean, the second did find and fix corrupt elements of store, but the problem persists.

  Download the tool for troubleshooting Windows Update from Microsoft page, who reported finding and repairing problens with service, but again without success.

  Reduce the installed updates at a time, in the instance that Windows can't handle most of the many updates at the same time. I tried this and it seemed to go well, but a strange point of interest that is so annoying is that several edits I checked are installing somehow, even if it is the only example that shows the number of updates being installed before restarting. Yet I always comes to the same conclusion. Failure of Windows updates the screen. What should I do?

  Hello

  Please update us with the State of the question. We apologize for the delay in responding

  1. You have a disk to install for Windows 8?
  2. Can you please explain what did you mean by update failed?
  3. Have you an error message when the update failed?

  I propose to perform the refresh once more using the Installation of Windows 8 disc, but before to perform updating please follow the procedure below

  Step 1: Repair of drive

  One of the best ways that you can check the alteration in the hard is to run a check disk on this subject. Please follow the steps below to repair the disk using the disk check.

  1. Open This PC by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), recording this PC in the search box, and then tapping or clicking on This PC.
  2. Press on and hold or click the drive that you want to repairand then tap or click Properties.
  3. Tap or click the Tools tab, and then, under error-checking, tap or click check.   You may be prompted for an administrator password or to confirm your choice.
  4. Follow the instructions. You may have to restart your PC after that error checking is complete.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Step 2: command tool (DISM) deployment image Service and management.

  By running this command, we can retrieve or modify information in an image. To run the DISM command, please follow the steps below:

  1. Go to the Windows Start menu.
  2. Type cmd on the keyboard.
  3. Right-click on the program from the command prompt and choose Run as administrator.
  4. The command prompt dialog box.
  5. Type the command Dism.exe / online/cleanup-image/Restore health and press ENTER.
  6. Wait for the command to run which can take about 30 minutes.
  7. After running the command, please try to make the backup of the system.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• I get this error 8007006E Code when I try to install Windows updates

  Original title: 8007006E error Code

  I get this error when I try to install the updates that my computer is telling me to install. Error Code 8007006E please help.  I think this is the beginning of a domino effect more major problems.

  Hello

  Follow these methods and check if that helps:

  Method 1:

  I suggest to disable the antivirus and then try to install the updates and check. Also, make sure that you enable the antivirus once the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to temporarily disable

   

  Method 2:

  You can try to reset the Windows Update components and then try to install the updates and check what is happening.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058 

  Method 3:

  See also section provide below and check if it helps:

  Problems with installing updates

   http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope that information was useful

• Windows XP error when you try to install Windows Update

  I just installed Windows XP Home Edition with Service Pack 2 on my iMac under VMWare Fusion 4. When I use IE6 to try to download Windows Update, I get the following message: the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "The website has encountered a problem and cannot display the page you are trying to display."

  Hello

  There are several cases were reported, or problems accessing the Windows Update If you have not installed service pack 3. Service Pack3 can be obtained here.

  http://www.Microsoft.com/download/en/details.aspx?ID=24

  Ignore the heaidng that says that it is a network installation package. I suggest that you install this download SP3 and to report if there are still problems.

  Tricky