4th gen Siri remote control has stopped working

Similar Questions

• Remote Desktop has stopped working suddenly Premium Ultimate

  I used to be able to remote desktop to my laptop with Vista Home Premium on my desktop with Vista Ultimate. All of a sudden, it stopped working (March 09). I tried many steps of troubleshooting without success and I searched and searched online with no resolution. Help! I examined even the laptop to ultimate upgrade, but I seriously doubt that would correct the problem, since I should be able to remote desktop ON the ultimate machine (not in it, of course) and did so successfully for over a year... so far. I don't know what changed between yesterday and today, with the exception of Windows updates. No other software or hardware has been installed. The laptop has wireless and it works very well - I can access the Internet and the network with no problems at all.

  Steps, I have taken/other info: (not necessarily in order - just write them as they come to me)
  1) reset all the workstations and the router (I have a 3rd computer which has XP also).
  (2) checked to make sure port 3389 is open on my router 2 and in the firewall (McAfee). Within McAfee, do ensure that the remote desktop program and service were allowed, both directions and on all the workstations. Also controlled canyouseeme.org to ensure that port 3389 is indeed open and he succeeded.
  (3) connection I tried with the firewall disabled on two workstations and always without success.
  (4) Made sure that on the host, the remote settings have been enabled and all users can connect, using any version of Windows. Also tried unchecking, reset and rechecked.
  (5) the user accounts on all workstations are directors.
  (6) the fact that the Terminal Server service has been started on the host. Tried them stopping and restarting.
  (7) tried ping - success in all directions by the two IP address and computer name.
  (8) network resources are available in all directions - I can see and access files shared all around.
  (9) installed all the Windows updates available. Reloaded later.
  (10) remote desktop from the laptop to the machine off XP is successful. Ultimate machine to XP is successful. From XP to ultimate is successful. The only one who does not work (and it's an important) is from the laptop to the machine by excellence. Argh!
  (11) even tried to restore the laptop provided the factory (tested - didn't work) and then through all Windows updates (test I went - never able to operate).
  (12) fact that Windows Firewall has been disabled on all workstations.
  (13) fact that network discovery, file sharing and public folder sharing is turned on.
  (14) RDP I tried with the name of the computer with the IP address.
  What Miss me? The only thing I can think is that somehow one of Windows Update caused this problem, but my research online for someone else knows this at the same time me are coming short. So I'm completely confused and frustrated!
  Thanks for reading my post, and I'd appreciate any help.
  Sally

  I didn't need to post on the technet forum, because I have solved the problem. I decided to bite the bullet and just give my idea to try and hope for the best (created a first system restore point). The solution was so freakin ' easy... wonder why I couldn't find all the details on how to do...?

  In any case; On the ultimate box (the one I am trying to remote desktop in), I opened the management console (mmc.exe) and add the Certificates snap, for the computer account, computer local. Double click on certificates, double click on the desktop folder remotely, double click on the Certificates folder and highlighted the certificate (there was only one, with the name of the computer as the title) and removed (first of all, I copied and put it in another folder, just in case where).

  This solves completely the whole issue and workaround is no longer necessary.

  I hope this helps someone else.

  Sally

• EMagic Logic Control has stopped working

  I have havn´t been using my Emagic Logic Control for a while and as I wantted to use it it didn't work any more.

  EMagic Logic Control doesn´t appear in the configuration of logic controller, but the Jog Wheel works?

  Mac Pro early 2012

  Unitor 8

  RME Fireface 800

  EMagic Logic Control - v 2.1.2

  Logic Control XT eMagic

  OSX 10.11.6 (El Capitan)

  9.1.8 logic (64-bit)

  I tried on:

  trashing the prefs and controller logic Surface prefs, then restart

  2 different midi interfaces

  different midi cables

  different supplies

  tried to re - install the 1.02 update firmware with no success

  also, another computer running OSX 10.11.6 and logic 9.1.8 (64-bit)

  Switch between mode Mackie and logic

  When I turn on Emagic Logic Control, it passes through the calibration Fader without problem, but doesn´t go further and sees no logic, but Logic Control XT Emagic is considered by the logic.

  It seems that the midi input does not work.

  You have any ideas? Maybe it s a hardware failure and I should try to find spare parts?

  Well cordially

  Henning

  EMagic as a society has not existed for so long now and their products have not been updated for so long, I think that it is no longer compatible.  He did stop working with an upgrade of software of any kind?  Yes, it's going to be difficult with this type of old hardware.  I would have the Unit checked out by someone who knows how to check what works and doesn't work inside.

• Apple TV (3rd generation) remote control suddenly stopped working

  I used aluminum remote on my 3rd generation Apple TV for years without a single issue.  Then last night, after working fine most of the evening, it simply stopped working.  The first thing I did was to get the distance within two feet of the Apple TV, and then I was able to make it work.  To me, this indicates a battery is weakening, so I replaced it.  Same problem: Apple TV does not remotely, unless I get very, very close.  Just in case, I got a new battery, I tried a second.  Same question.

  I did a bit of digging in the community forum, and here's what I've tried:

  -restarted successfully the Apple TV via the software and then again just unplug the power cord and wait 10 seconds, but the problem persists.

  -successfully paired and re-paired remote control, but the problem persists.

  ATV shows a solid light when I push buttons, unless I come to this beach to two feet and then it flashes once as her answers ATV.

  I have looked on the IR through the camera of my iphone, but don't see any red flashes... and yet the ATV receives the signal from the remote control if it is close enough.

  Curiously, as part of my diagnosis, I noticed that the "UP" button had become insensitive, even from the beach which work the other buttons.

  I have not dropped the remote or mistreated it somehow, so can't see why it would break suddenly without reason.

  I'm puzzled.

  Your troubleshooting sound research.

  I would buy a new remote from Apple and try it.  They are $19.00.  If she is doing the same, the receiver IR of the ATC is responsible and return the new remote control within 14 days for a full refund.

  If it works keep the remote control.

• Connection remote desktop has stopped working

  I'm used to be able to connect via the desktop remotely from my computer Windows 7 on my Windows XP computer. Both machines have been recently updated (Windows updates) and now remote desktop doesn't work anymore.

  After that the two machines reboot their updates, I tried to connect to the Windows XP computer.  I got a dialog box on my Windows 7 machine (which was never released before) titled "Windows security" and asks me to enter my credentials. It shows my username (which is displayed correctly), and give me the ability to use another account.  There is also a small box downstairs that allows him to "remember my credentials".  As I said, I've never seen this front window.
  When I put my password it comes up with another dialog box that reads 'fixing remote connection', where he stops, then fails stating that "the connection attempt has failed."
  I checked on the remote computer (XP), that he will accept Remote Desktop connections.  I checked my username and password I use are correct.
  I went back to my machine windows 7 and tried to use remote desktop.  This time, I never had the Windows 7 dialog box (one titled "Windows security") it displays the Windows XP login screen (which is what it normally does).  I was able to connect properly.
  Now, today, I tried to use the desktop remotely again, but again got this dialog "Windows security" Windows 7 once again and the same problem everywhere.  I can't connect to the XP machine more.
  Any idea what's going on?

  Hello J Kerchner,

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to remote desktop and would be better suited to the TechNet Windows community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/

• Remote Desktop has stopped working

  All of a sudden I can't RD my server (under Win 7 Pro).
  I can access all the drives shared without problem but Remote Desktop behaves as if she's not here.
  The server presents itself under the management of network and homegroup.
  I looked and remote desktop has been enabled on the System/Remote Server settings dialog box.
  When I delete the credentials and try to connect - remote desktop is not even asking me my PW.

  As the saying goes - It was working fine a few days ago and I wouldn't change a thing.

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
   
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information is useful. Please let us know if you need help.

• Remote Desktop has stopped working on windows server 2008 r2

  My windows Server 2008 are no longer accessible through Office remotely. System was fine until yesterday, now, it does not accept rdp connections.

  Hi Doug,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums for further assistance:

  TechNet Forums (Services Terminal Server) remote desktop services

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• "Windows Explorer has stopped working" if I open Control Panel

  Guys, could someone help me please?

  When I open the Control Panel, it says "Windows Explorer has stopped working" and then it restarts Windows Explorer. When I right click on any folder it says "recording of the UI language is not valid" 5 times and for a split second, it says "Corrupted registry" then it works. But I am unable to use the control panel.

  I have Windows Vista home premium and Norton Antivirus.

  Can someone help me please?

  Hello

  The error message says something about corrupt registry.
  So, it seems that this issue would be related to incorrect or damaged registry entries.

  If the registry is damaged, your operating system will not work as it should and can feel such or similar problems.

  I m using the CCLeaner to clean the registry and other system files.
  It s a free tool and you should try it.

  If this does not work and if you notice the same question so I would recommend reinstalling the OS using the Toshiba recovery disc.
  In most cases this will help you fix this registry

• Pavilion g4: apllication of Catalyst Control Center: Host has stopped working...

  I get a pop-up window saying: "Catalyst control centre: host application has stopped working.". "

  It is written in the body of the box: "a problem caused blocking program woring correctly. Windiows will close the program and notify you if there is a solution. "
  
  I can't connect my games online as well. Please give a good solution

  Hello @Sailorswrath ,

  Thank you for your inquiry.

  What is your exact model of the Pavilion G4 you have?

  How can I find my model number or product number?

  There was a recent change before that happened?

  Have you tried running MS difficulty?

  Have you checked against viruses and malware?

  Here is a link to help test for a hardware failure.

  HP Notebook PC - detection of hardware failures (Windows 7, Vista)

  If it is a recent change, you can perform a restore to a well known date?

  HP Notebook PC - using Microsoft System Restore

  Good luck!

• Want to m6: Catalyst Control Centre: host application has stopped working

  Whenever I start my computer, I get the following message every time that a few months:

  "Catalyst Control Centre: host application has stopped working".

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Please how can I get rid of this or get whatever the problem is solved?

  Thank you.

  Hello

  Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Issue of satellite A300 Catalyst Control Centre - host application has stopped working

  At startup, and whenever I try to open the Catalyst Control Center, Windows displays the error message ' Catalyst Control Centre: host application has stopped working ".

  Has anyone else with similar problems.
  I tried to reinstall the drivers on the toshiba site, and install the new drivers on the ATI site and all I could think about. Given that the two pilots do not work im not able to exceed the resolution 1024 x 768.

  Any suggestions?

  Hello

  I googled for this error message and found many people having this problem.
  It s not related to the laptop, but for the driver
  Who knows why.

  In any case, in most cases the people solved this problem by the new driver Catalyst installation.
  You should do this;

  -upgrade your Vista to the last State
  -remove the old system catalyst
  remove/uninstall the graphics since the device manager driver
  -Restart the computer and reinstall the driver and catalyst

  Should work!

• Catalyst Control Center host Application has stopped working

  I get this promt twice when I start the computer. I tried something that has been recommended who was clicking on tools in CCleaner and see if it was on the list that he was. I deleted it then as recommended but the guests still appear.

  Check these related discussions

  Catalyst Control Centre: host application has stopped working - Windows 7 Pro
  Catalyst Control Centre: host application has stopped working disk failure / hard
  Catalyst Control Centre: host application has stopped working
  Catalyst Control Centre: host application has stopped working
  Catalyst Control Center has stopped working: the Application host

• Catalyst Control Center window will appear to indicate that the program has stopped working properly

  Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

  Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

  Jim

• Catalyst Control Centre: host application has stopped working Windows xp prefessional

  Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.

  Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.