4th generation Apple tv remote keeps switching HDMI 2 if I have my surround sound Samsung anynet on which uses when the samsung TV is turned on. Currently I have away the skin until I found what I want to watch.

Similar Questions

• How can I remotely control the music on the 4th generation Apple TV

  On the 3rd generation Apple TV, I could use the app Remote for artist, Albums, songs and playlists which was to play directly from the Apple TV remote. This allowed me to sit on the deck and set or change my playlist remotely while my Apple TV played on and on. I couldn't count on Airplay from my iPhone to the Apple TV because of being at the edge of my wireless connection. So I used the application to load a playlist on the Apple TV, which was always in range and connected to my stereo.

  With the 4th generation, I can't find an option to load remote a playlist, artist, album, or song. I can only handle what has been loaded using the physical remote control and a TV screen that beats my goal. I bought the 4th generation, because the 3rd generation could not access my subscription of Apple's music while the 4th generation can.

  Am I missing something or is the 4th generation Apple TV / Remote app missed something?

  Make sure that your Remote application is up-to-date. The current release is 4.2.3 and fully supports the music playback controls.

  Remote by Apple

  https://appsto.Re/us/g198q.i

• Cannot open the component of the battery of the 3rd generation Apple TV remote.  The "cover" stripped is by using a coin to turn the cover counterclockwise. Any suggestions?

  On the component of the battery of the 3^rd generation Apple TV remote, the "lid" is getting stripped by using a coin to turn the cover counterclockwise. I even used a screwdriver flat head with a cloth & it will not always be open.

  It is partially open, but I think there was some debris. I disabled the debris, but the "lid" is badly stripped. I stopped as I would not completely destroy the compartment cover. Any suggestions?

  I had a similar problem with another camera, but a very similar configuration, a round lid on a stack of pancakes about two years ago. I got to have adhesive PuTTY handy of Museum at the time.  I took enough Putty to cover the circular cover, let it sit for just a moment, or so that he could 'stick' (it's not like glue, it will come off easily). I have enough of the dough (about a 3/4 inch ball) used to create a handle and everything pushing down pretty firmly on the sealant to keep it on the cover, I did one-quarter turn and cover came out. I just took my money AppleTV 3 remote out of storage and tried this technique on her, and she seemed to cling to the coverage and helped me with the tour. My remote money is not received tap stuck like yours and the housing is in good condition. But it might be interesting to try. If you live in Irvine, California you should probably have some of this PuTTY on hand. It is usually used to prevent the fall during an earthquake of trinkets and other fragile objects of light weight. If all else fails, a new remote money is always available on the Apple Store for $19. Good luck.

• How to authenticate a network open on 4th generation Apple TV? Or pull up a web browser?

  How to authenticate a network open on 4th generation Apple TV? Or pull up a web browser?

  If you need assistance with a Wi Fi connection = > get help with Wi-Fi on your Apple TV - networks Support Apple

• My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  If she needs your Apple ID password and you have enabled 2-factor authentication, you might have to temporarily disable the connection to complete.

  Also, you need an internet connection to perform this step here.

  If your problem is not of the above, please describe more completely. Furthermore, to give specific messages on the screen.

• 4th generation Apple tv does not see my Apple bluetooth keyboard

  I go into the settings on my Apple TV > Bluetooth and it just sits there looking.  I can't do gets my apple keyboard is displayed.  I can associate the keyboard very well with my phone.

  The 4th generation Apple TV does not support Bluetooth keyboards.

  Use the Bluetooth with your Apple TV accessories (4th generation) - Apple Support

  There are a lot of devices and accessories that you can pair with your Apple TV, as Bluetooth headphones, speakers, and game controllers. Some devices including Bluetooth keyboards are not compatible.

  
  

  A future update is supposed to bring this functionality to the 4th generation Apple Tv.

• 4th generation Apple TV doesn't appear in itunes sync window cannot have content. Home sharing is on.

  4th generation Apple TV doesn't appear in itunes sync window cannot have content. Home sharing is on. Can not download music from my itunes library on the apple TV. Had a previous 1st Gen Apple TV. Any help would be great. Thank you

  The Apple TV is a device of broadcast rather than a storage device. You would home sharing and local stream your iTunes library via share house or stream content providers online who have released apps the App Store, such as Netflix, Hulu, Crackle, HBO etc would allow you to icloud photos and stream iCloud. But you won't actually store all personal data on the device ATV4 himself that the feature was available on the first generation...

• Problems with Pandora APP - 4th generation Apple TV

  I installed APP Pandora for the 4th generation Apple TV and connected to my subscription account a Pandora. I tried to listen to one of my station, but he would not play. I tried to other stations, but the same problem it does not. My sound is fine with my other APPs and iTunes Movie / TV content. The problem is isolated in Pandora. I restarted my Apple TV several times, unplugged, reset the wifi router.

  I removed the Pandora app but now there is a national socialist icon without a name where the pandora APP formerly icon but I can't remove it and I can not install Pandora... someone please help with the removal of this BAD APP without resetting.

  Steve

  You can try to delete the rest of the settings app > apps, but if that does not help you might have to do a restor. You can consider to subscribe to Apple music instead.

• How to end loop when the desired value is found.

  Hi I have a loop below and I want the loop at the end when the desired value is found.

  <? PHP {? >}

  <? PHP $allvotedid = $row_VotedUsers ["VotedID"]? >

  <? PHP} while ($row_VotedUsers = mysql_fetch_assoc ($VotedUsers));? >

  I want this loop to the end when $row_VotedUsers ['VotedID'] is equal to the variable URL ID. So lets say pagename.php? ID = 1, I want the loop to go until he finds an ID value which is 1. And then I want this set to $allvotedid. And if detects any value to it then I want to stop a loop.

  Thanks for any help. I hope I made that clear.

  cwhazzoo wrote:

  Hi I have a loop below and I want the loop at the end when the desired value is found.

  The following will do what you asked:

  However, it is a very inefficient way to do it. If you are interested is whether the code transmitted through the URL is in the VotedID column, simply create a Recordset by using the URL parameter ID ($_GET ['ID']) as the filter. Then check the value of $totalRows_VotedUsers. If it is 1, the user has voted. If it is 0, the user has not voted.

• What ESXI host NIC will use when the membership of the AD?

  What ESXI host NIC will use when the membership of the AD?

  I have a domain on ESXI host controller and I want ESXI to join the AD? I need to create a vmkernel for the goal?

  Hi Welcome to the communities,

  It will use the management network, which uses vmk0 as a default, no need to create a new vmkernel.

  Then look up what vmnic is connected to vmk0 in your installation.

  Concerning

  Tim

• When the memory coherence is full, what consistency do?

  Dear Expert:
  
  I have a problem in customer, they ask:
  When the memory coherence is full, what consistency do?
  He takes care to write data or the entry on the disk?
  If it can be supported, how can I config?
  
  
  I read some documents, but I find things like this:
  < local plan >
  LRU <-eviction strategy > < / eviction strategy >
  < high-units > 1000 < / high units >
  < expiry delay > 1 h < / timeout >
  < / local plan >
  
  but I can not find somethings on the coherence jvm memory usage?
  
  
  Thanks in advance.

  Hello

  There is no magic solution to stop short of memory coherence. A cluster of coherence is a limited resource and has a finite size and you need to do some sort of exercise as you would with something like a database capacity planning system. You wouldn't continue to put data in a database without him running out of resources, and the same is true with consistency.

  Yes, there are things like expiry which allows you to limit the size of the caches, but like the previous poster said, when the limit is reached data will be evicted from memory. Unless you have some form of persistent storage for these data using something like a dumps, while the data is lost.

  You can set the overflow to disk so that when a size the cache limit is reached as described here http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/cache_examples.htm#BACCHCIA

  The problem with the ousting of size based and exceeded the size in function, is that the limit is per cache per JVM. This means that for a system with several caches and services that you usually end up expulsion or overflow to disk for a cache that reached its limit when there still may be a lot of memory left that you need to allow for each cache being full in your design.

  I saw people in the past are trying to find different ways of ousting of data based on the used JVM heap, but they never seem to be satisfactory. If you've seen a chart of the JVM heap usage you will see that it is usually a model of Sawtooth constantly up and down. A JVM could hit 90% use but still have a lot of real space because he had not recently made a GC. If you have a schema data eveicted when the reached JVM say 90% you could start to expel the data too early. Also, it's probably enough data in a cluster push possile faster than data can be evicted if you might still run out of memory. A cluster of coherence consists of multiple JVM processes and if you get skewed the disaggregation of data or you caching of objects of different sizes, it is quite possible to get Java virtual machines in the cluster running off lot well before others. The project I'm working on that, we had a situation where we had a few nodes in the cluster using more than 300 MB of heap more than the other nodes in the cluster - is quite a big difference when the total heap was only 2.5 GB.

  As I said the best thing to do is good capacity planning. Work out how much you need to organize and work on the size of your cluster based on that data. You probably still have some sort of eviction of the data well. The system on which I work at eviction of the moment according to some data and custom eviction of other data based on business rules. Custom eviction is juats another process that verifies the data and expels the relevant stuff.

  JK

• 4th generation Apple TV connected to the projector

  I have an Apple TV 4th generation connected to a projector with a Kenex of HDMI to VGA with Audio for the 4th generation.  Whenever I want to play Netflix or HBO NOW I get a black screen. I can only here the sound and I get a black screen.  It works fine when I use other applications.

  What can I do to fix this?

  I would really enjoy HBO NOW and Netflix with this number.

  I think that your card does not support HDCP on the HDMI connection, which is required by these suppliers copy protection. Because you want to convert it to VGA, this isn't surprising, because an enterprising hacker could extract the digital video stream. Most of these adapters are sold "educational purposes", not the home entertainment, and that's why. That said, if you look diligently, you can find a suitable adapter. The educational goal of the KENIMBENI is actually mentioned on the Apple store page http://www.apple.com/shop/product/H9139VC/B/kanex-atv-pro-x-hdmi-to-vga-adapter-avec-audio-prise supported, as well as a comment by the user that it cannot handle the HDCP.

• I'm putting my 4th generation Apple TV and it won't move from Spanish to English. Any suggestions?

  How can I get my Apple TV, 4th generation, the Spanish into English installation screen.

  THX

  During the first part of the Setup program. There is an option to select a language. If you got the part already, unplug your apple tv, wait 3-5 minutes, then plug it back and wait for the start. If she does not go to select a language, then contact the apple support.

• Apple TV Remote app using when the personal hotspot

  Due to bandwidth limitations, I am better off using Apple TV via a personal hotspot on my iPad (ATT now plan has unlimited data available).  However, once the TV is connected to the personal hotspot, and Apple TV works very well using the included Apple Remote, if I try to activate the Remote app on the iPad it says unable to connect to a Local network.  You must connect to a WiFi network to control iTunes or Apple TV.  If the iPad app is looking for WiFi while the iPad is broadcasting a Personal Hotspot via WiFi to the Apple TV.

  Is it possible to fix this?  In addition, I sure with Apple TV 4 (latest version) would recognize my Apple's Bluetooth keyboard!

  You have to be on wifi, no way around that. Bluetooth keyboards are not supported at this time. Also, best to check with ATT on the terms of the plan (more connection after certain Butterfly amplifiers and do not permit this type of use).

• can anyone help me find an app for the Zeen which has just the time and date? Don't want to google.

  I don't know how to use the apps since all I found is on android, but apparently the Zeen is not compatible with the android apps.  I have google calendar, but it doesn't work and want to only the time and date is displayed.  I followed all the directions for adding applications, but they do not work or I can't understand them.

  Salvation of theeagles,

  The Zeen is unable to access the Android Market, but it's an Android device.  There is a market for this called SlideME, and you should have the icon for it in your apps section.  I have a station also, and I'm just a normal clock on mine.

  Here is a link to SlideME, if you want to see what applications are available: http://slideme.org/