5.0 operating system compatibility mode

Similar Questions

• The statement says operating system compatibility pack is Windows NT6.0 I use Vista

  I'm trying to declare on the 7.1.20110512W using Add-on Compatibility Reporter 0.8.7 toolbar add-on. When I click 'compatibility' and select 'that add still works' compatibility box operational information system States: "Windows NT 6.0" is supposed to be my operating system? Windows Vista is my operating system here at work, and the Google toolbar works. On my home computer, the operating system is Windows XP and I've yet to be able to get the Google toolbar to work. I'm still working on it.

  http://en.Wikipedia.org/wiki/windows_nt

  Windows NT 6.0 can refer to these releases of Microsoft Windows:
  Windows Vista
  Windows Server 2008
  

  NT 5.1 is Windows XP.

• Guest operating system compatibility

  Dear team,

  We have mix U1 ESX5.1 and ESXi5.5U2 environment. We are palnning to deploy Windows 2012 R2 on U1 ESXi5.1 host, I want just to cofirm will, I was able to migrate 2012 SMV of ESXi5.1U1 to ESXi5.5U2 I found that there are a few incompatibity with mixed version as shown below KB. I would also like to confirm that they said that this applies to 5.0.x and 5.1.x.

  

  need your urgent help on the same.

  concerning

  Mr. VMwrae

  Ko 2033723, the affected guest operating system is Windows Server 2012 (not R2) and hosts ESXi 5.0 Update 1 or ESXi 5.0 P03... then I think you should just avoid using this version of the build host, given that the VMware compatibility shows that Windows Server R2 2012 is compatible only with ESXi 5.0 Update 2 and later versions.

  On the other KBs, make sure to read workaround, and everything will be OK.

• A Portable hard drive operating system compatibility

  I bought a Seagate Expansion Portable hard 3 TB drive and want to transfer the files on my old PC (which uses the operating system WIN XP) on my new PC (which uses the operating system WIN 7). When I connect the camera on my old PC, it is not displayed in "My Computer", but it can be seen under "sensor external hard drive... I followed the suggestion of Seagate to reformat the device in the MBR format but persists above. Is there a way I can connect to my old PC so that I can transfer the data via portable hard drive? Or is there a driver I can install to fix the problem?

  AA

  Did you leave the 1 partition of 3 TB drive?  XP cannot 'see' as large partitions. It can 'see' up to 4 GB.  I would create a second partition 25% larger than the data on the XP machine by reducing the current partition and creating a new.

  The best way to proceed is to use EaseUS partition magic (free)

• Upgrading the BIOs, but I received a message that changed the secure operating system startup mode

  Dear community,

  I tried to upgrade the Bios of my laptop, a couple of restarts, a message came to allow a change in the change of operating syetm boot (021) mode. I'm following the instructions from HP upgrade to windows 8. I need neter one code to grant change or Press esc to continue with the change.

  A little afraid, because I don't want to damage my laptop.

  Thank you.

  I solved it, just continue with the change. Everything will be fine.

• HP 15-g020dx: I got an error message "operating system Boot Mode changed."

  I had got an error message on the boot image and I came here, telling me to change the startup parameters to the legacy that I did, but I might be able to register the change because he could do nothing except "esc", which had to cancel the change type. What should I do?

  Hello

  When you change the boot mode and are then invited to enter a 4-digit PIN, there will be no display of the numbers that you type for security reasons - just type in the numbers and press ENTER.

  Kind regards

  DP - K

• Webcam with operating system compatibility

  Original title: is this windows xp or windows 7

  I try to get info.on webcams and compatibility between software xp or 7 what works and what does not. bare with me I'm not a very fast typist or the correct spelling, I have xp will only be the cam software w long to do the work I want to just talk to friends, no big deal

  Read the description of the product.  If the site does not specify, either you make on another website or email/phone for more information.

  Most webcams sold today should be compatible with Windows XP (sp2 or sp3), Vista and Windows 7.

  Out of curiosity, what adapter USB wireless purchased which is not compatible with Windows XP?  "Did not work" does not necessarily mean ' not compatible with '-it is always possible to receive the defective hardware.

• Mac with CS4 programs operating system compatibility

  I have an imac 2009 8 running OS 10.6.8 with Creative Suite 4 installed. I can upgrade to El Capitan and there still be compatible with my Creative Suites? And I would be able to upgrade my Yosemite to El Capitan on my laptop (2010 macbook pro) runs the same programs?

  Maybe, but maybe not... and Adobe is only updated of CURRENT programs to be compatible with the new OS (Mac and Windows)

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Operating system compatibility still CS6 Adobe [Mac El Capitan]

  Adobe Encore CS6 works OK with the last February 2016 El Capitan far?

  Migration of Mac with Time Machine NOT WORK with Adobe program activations due to hidden folders are not included when Migration or Time Machine make their copies

  You have to disable everything that you do not use your old Mac, and then perform a new installation on your new Mac

  CS6 installing on a new Mac is VERY likely going to be a problem (it was for others, which is where I got the links below)

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Are obsolete root of trust certificates required to use XP mode / compatibility mode on my Windows 7 computer?

  For example, I have two PKI certificates that are necessary and confidence of Windows XP, but they are absent from the trust list in Windows 7:

  Why are these certificates on a Windows 7 computer?

  It is the responsibility of the administrator to remove certificates that have exceeded their expiration date?

  That would limit comparability to turn back? Would be the removal of expired certificates limit the functionality of the operating system compatibility modes?

  Hi Douglas,.

  According to the shooting, description and screen of the problem it seems that you are connected to a domain environment. Yes, you are right that these certificates on a computer Windows 7 requires administrator permissions to remove. However, if you need additional support, you can try to republish your query on the TechNet community.

  Hope that the information provided was useful. Feel free to post on the forum if you have any concerns more associated with Windows.

  Kind regards

• How to install multiple operating systems

  Hi, im from the India,
  I have hp Pavilion-15-N209TX, with Windows built-in 8.1,
  I want to install anothere os (Windows 7),
  Windows 8.1 Windows 7 plus several operating systems.

  How to do this?

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) in Windows 8 / 8.1, reduce the "C:" partition and create a new partition of the unused space. Please see partitioning and naming of readers (Windows 8) for more information on partition in Windows 8 / 8.1.

  (2) download f6flpy-x 64.zip, extract the files/folders and place it on a USB Flash drive.

  (3) turn on the computer and immediately start typing the key "ESC".

  (4) when the MENU is displayed, press "F10".

  5) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  6) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  7) press "F10" and click "YES" to "Exit Saving Changes".

  (8) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (9) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (10) turn on the computer and immediately start typing the key "ESC".

  (11) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (12) select 'Language', ' time / currency ' and 'Keyboard' settings and then click "Next".

  13) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (14) you may need to provide Intel SATA/RAID drivers at the moment...  Use the Intel SATA/RAID drivers that you previously placed on a USB Flash drive.

  (15) to follow all instructions and meet the need. Enter the Windows 7 key when asked.

  Most of the 64 - bit drivers Windows 7 for HP ENVY 15 t-j100 CTO Notebook PC drivers of Quad Edition page should work on your computer. DO NOT use any BIOS or download of the firmware from this page. Please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Can not find Workstation 11 documents that specify host for Linux operating system support

  I had all the versions of the workstation since version 3 or 4, and in all cases, Workstation ran on a Linux OS support.  For now, I have both Debian and Red Hat Linux workstations and prefer to stay with Red Hat for my work of VMware Workstation. However I find no actual docs for workstation 11 who tell me what rev of Red Hat Linux is supported. Also, I don't see the real support as available contracts more. Once upon a time, you could buy support workstation. I already have systems of vSphere 5.5 to work and they have full support, but I can't support 7 x 24 production on my computer it seems. in any case, what is the actual supported Red Hat Linux tricks? 6.6 worm or am I stuck goes Red Hat 7?

  Thanks to anyone who really knows.

  response to me here:

  After a bunch of research, I get to a page that tells me to get the compatibility guide:

  VMware Workstation 11 Documentation Centre

  Who gets finally me:

  http://www.VMware.com/resources/compatibility/search.php

  Which is useless for workstation because it lists only the products of ESXi.

  Always to research... and I get this:

  http://www.VMware.com/resources/compatibility/search.php?deviceCategory=software

  Nope... It does not help... I select "Host OS" and is told to go elsewhere:

  The host operating system compatibility information has been moved to the following location:

  
  

  http://KB.VMware.com/kb/2100429

  
  

  Host operating system support information (2100429)

  Goal

  Supported host operating system data are removed from the Compatibility Guide VMware (VCG) to other articles of the basis of knowledge (KBs).
  This article KB then told me to go somewhere else to:
  VMware KB: Supported hosts for VMware Workstation operating systems

  Operating systems supported for VMware Workstation guests (2088579)

  your da!
  The answer is that 11 workstations is supported on some types of Linux and the most notable are:
  Red Hat Enterprise Linux 5.10
  Red Hat Enterprise Linux 6.5
  Red Hat Enterprise Linux 7.0 (note: 7 RHEL is horrible)
  The answer is therefore a flat NO WAY for Debian or one of its close brothers.  Strictly big business Linux here.
  Nice hide details in seventeen deep research.

• I'm using Adobe Photoshop 5.5 Windows XP & have no. SL. with me. Recently, I changed my Windows 7 operating system and tried on several occasions in compatible mode software is not downloading, is there another medium like patch etc, please suggest me

  I'm using Adobe Photoshop 5.5 Windows XP & have no. SL. with me. Recently, I changed my Windows 7 operating system and tried on several occasions in compatible mode software is not downloading, is there another medium like patch etc, please suggest me to solve the problem.

  as I know he never was a 5.5 ps, but something more old ps cs2 (version 9) is not likely to work on any modern operating system.

  You can use your old computer with them or try and install using compatibility mode or consider an updated version of the ps ($ 10 / month for lr and ps is the plan more economic that includes ps), plans, pricing and membership creative cloud | Adobe Creative Cloud

• Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode.

  Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode. When I start the browser is not open and it displayed a message
  Mozilla Crash Reporter

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; InfoPath.3)

  Go to the address on: plant and tell us your last accident IDs. Then we can watch data specific to your accident and have a better idea of what is causing the problem.

  Given that everything goes well in safe mode, one of your extensions or themes is at fault. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems to figure out which one of your modules is the cause of the crash.

  Start here: https://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes#The_problem_does_not_occur_in_Safe_Mode

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!