5.0 to 5.1 upgrade on a flash-drive equipped host ScratchConfig

I upgraded ESXi 5.0 to 5.1 on 3 hosts on 5 I,

on host 1, I get a warning under the Summary tab that says:

Configuration problems

On the host xxx.xxx.xx.xxx the log files are stored on non-persistent storage.

This specific host have no local hard drives/data warehouses and runs on a 8 GB usb flash drive.

2 other hosts are different because they have a local data store and the 8 GB flash drive where is installed the ESXi.

By comparing these hosts, I see that by virtue of:

Configuration > advanced settings > ScratchConfig > ScratchConfig.ConfiguredScratchLocation

The yet to be upgraded 5.0 hosts don't have anything set up, and it is shown below that (in gray) that/tmp/scratch

is used as a work space (it is a ram disk AFAIK) currenty

These hosts are not any warning with this configuration less than 5.0

Guests that have been upgraded to 5.1 and have a small shop: /vmfs/volumes/4ff2eb2d-98622fdc-e85e-bc305be3c5d9/.locker

set up at this place, it's probably something that has been modified during the upgrade process and is now pointing to this volume.

The host that has been upgraded to 5.1 and NOT store still have this field empty, but as said at the beginning - gives a constant caveat that can't get out.

Is there a way to make this warning disappear? (of course it adds mak yellow exclamtion on the host too...)

Your welcome gpalmon.

I too think you should be able to recognize and alarm, but I guess VMware wants its clients to set a location for permanent storage for these newspapers.

Don't forget to assign points to get useful responses to your messages. =)

Ed

Tags: VMware

Similar Questions

  • How can I get a new password for an upgrade to my Flash drive?

    How can I get a new password to do a upgrade for my Flash Player?

    Why you need a new password; Just use the existing: https://forums.adobe.com/thread/1619850

  • When I upgraded my Adobe Flash Player, my past Google Yahoo search engine.  I can't switch back.

    When I upgraded my Adobe Flash Player, my past Google Yahoo search engine.  I can't switch back.

    1. Disable Extensions and test them.

    Safari > Preferences > Extensions

    Select Disable all extensions and test them.

    Enable the Extensions one by one and test.

    To uninstall any extension, select it and click the "Uninstall" button

    2 safari > Preferences > Search > search engine:

    Select your preferred search engine

    3. visit the site of your choice that it be the homepage

    Safari > Preferences > general > home page

    Click on the button "set to the current Page.

    4. use Malwarebytes Anti-Malware for Mac to remove adware.

    https://www.Malwarebytes.org/antimalware/Mac/

    Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.

    Once this is done, exit Malwarebytes Anti-Malware.

  • Toshiba Satellite 1730, the upgrade of my hard drive

    My friend told me that I had to upgrade my laptop hard drive (but he didn t say how to get this done)! Is it possible to do this? And if so, how can I do?

    As a first step, it would be interesting to know what Type of laptop (model number) you have. Maybe I can tell you more after this Info!

  • Can upgrade you your flash storage on an early 2015 mac book air?

    Can upgrade you your flash storage on an early 2015 mac book air?

    13 "

  • ScanDisk USB Flash Drive problem after upgrade to El Capitan

    After the upgrade to El Capitan, I can't access the vault secure on my USB Cruzer facet flash drive. I have Plug and display files as usual but when I try to open the safe, I get the message ' Scan Disk Secure Access V 2.0 requires San Disk USB Flash Drive. Please insert one. »

    The Flash Player has worked fine before the upgrade to El Capitan and I can still use the files outside of the secure vault but, basically, I cannot now access the secure vault. I'd appreciate any thoughts on how this can be resolved. I only am not an expert so please, keep it pretty simple.

    Sounds like a problem of compatibility with the Secure Access software and the OS X El Capitan of SanDisk.  Try download and install the latest version of Secure Access of SanDisk.

    It seems also be other users having the same problem, you may get better assistance with this through SanDisk.  Someone else said that upgrading to the latest version of Secure Access has solved the problem.

    http://forums.SanDisk.com/T5/SanDisk-SecureAccess-2-0/SecureAccess-2-0-and-El-CA Dube/td-p/347378

  • What is brccmctl and how to disable run the upgrade for adobe flash

    I'm trying to upgrade to adobe flash, but I keep getting the brccmctl to close the program... what? and how to close it

    See this response:

  • How upgrade windows xp to windows 7 on a computer that is not a reader of CD I have a copy of widows 7 and a flash drive that is 4 GB.

    How upgrade windows xp to windows 7 on a computer that is not a reader of CD I have a copy of widows 7 and a flash drive that is 4 GB.

    This is the Forum for Windows Update.

    Try this Windows 7 Forum for your questions on the installation:

    http://social.answers.Microsoft.com/forums/en-us/w7install/threads

    "Download Windows 7 installed and activated on your PC."

    For other Forums of Windows 7 and upgrade information links:

    http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

    Windows 7 Upgrade Advisor.

    http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

    Railways upgrade to Windows 7 at the link above.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 Hardware/Software Compatibility Center

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 forum for questions on windows 7.

    See you soon.

    Mick Murphy - Microsoft partner

  • I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

    during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
    also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

    Hi subhshy001,

    Welcome to the Microsoft Windows answers Forum community!

    Try this if you do not have

    Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

    If you have completed the steps and was not even useful,

    Follow these steps:

    Try to create a shortcut and sending it on the desktop.

    (1) open: Start Menu ,.
    (2) right-click: Internet Explorer icon .
    (3) select: send to > desktop (create shortcut).

    There should be a shortcut on the desktop .

    Make sure that the "show desktop icon" has a check against it

    OR

    Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

    If the steps above do not work then:

    You can scan your computer for malware.

    You can download, install and update anti-malware free of your favorite search engine and find malware.

    Important note:
    this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

    To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
    2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

    Hope this information helped!

    Thank you, and in what concerns:

    Aziz Nadeem - Microsoft technical support.
    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

    the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

    You n "t do it this way.

    You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

    If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

    Acronis True Image Home 11
    EASEUS ToDo Backup
    Paragon Drive Copy or Partition Manager Personal
    Casper
    Norton Ghost

    The process is simple:

    1. Install the software on your laptop for cloning
    2. RTFM (do not skip this step)
    3. Install the new drive in the external case
    4. Connect new player to the computer
    5. Clone original disc on new drive
    6. Stop
    7. Unplug the external computer case
    8. Exchange records (original for external disk) and the new laptop drive
    9. Reboot and enjoy your new drive.

    When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.

  • Remove the Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive.

    I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

    need an answer as soon as possible... Thank you

    I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

    need an answer as soon as possible... Thank you

    Hello

    The best way is to clean install and start over.

    In addition, it is not legal to have both installed version that the license is for a single installation.

    If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.

    See you soon.

  • Cannot access a Windows 7 upgrade USB flash drive

    Upgrade from Vista basic to Windows 7 Home Premium computer accepts flash drive but I can't access it. It is correctly stated in devices & Printers but not in my computer as a lettered drive. Read jasmith31 problem, but do not have a Security tab in properties. No error other than "installed device driver. Help please

    Hi lakeside71,

    This problem mainly occurs when windows 7 does not assign a drive letter for your USB drive. It occurs especially with the new flash drives connected to the computer for the first time. Assigning a new drive as such letter should solve the problem.

    Please follow the steps in the article posted by Shekhar on how to achieve this.

    This should be it.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

    Original title: bitllocker Windows 7 issue

    Hello

    I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

    Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

    I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

    Hello

    Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

    You can read the articles and check:

    What is the difference between BitLocker Drive encryption and EFS file system?

    Protect your files using BitLocker Drive encryption

    In Windows 7 BitLocker Drive Encryption: frequently asked Questions

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • upgrade to adobe flash player 11 info/how-to's

    How can I update flashplayer from adobe? When I go to watch videos on youtube a red banner across the square video part and says I need to update my adobe flash player then when I clicked on the "Download now" button it doesn t download and red banner rises again and I can watch t clips or videos. How upgrade to adobe flash player 11?

    Troubleshoot Flash Player installation - Windows
    http://kb2.Adobe.com/CPS/191/tn_19166.html

    Troubleshooting of stability and performance
    http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

    Adobe Flash Player not is not supported for playback in a 64-bit browser
    http://kb2.Adobe.com/CPS/000/6b3af6c9.html

    Flash Player Support Forum
    http://forums.Adobe.com/community/webplayers/flash_player

    Adobe Flash Player 10 fix for Windows XP, IE8, Firefox, ect.
    http://www.dslreports.com/Forum/r22361930-Adobe-Flash-Player-10-fix-for-WinXP-IE8-Firefox-ECT

    Download the latest version of Flash here:
    http://www.Adobe.com/support/flashplayer/downloads.html

    J W Stuart: http://www.pagestart.com

  • Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive.

    Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive. Each screen is blurred during the installation. Managed to get

    It is installed. A great until I had to reboot after the installation of windows updates. It starts with the first good looking for Windows 8 logo then

    the monitor turns off and the computer is still running. Reset and I get the windows repair screen. Sometimes, his clear and sometimes

    its blur. I have a motherboard Asus M2N with a Nvidia geforce GT 240 video card. I'm guessing that the windows install 8 pro and pre of initialization

    use some funky video drivers before windows loads the correct nvidia drivers. Microsoft needs to do a better install disc that allows to display the

    graphics correctly. Windows8-UpgradeAssistan does not really check very good material. I ran the windows 8 developer preview and it

    had no problem. Y at - it a hope?

    Hi SteveSimmons,

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    I suggest you install the latest drivers from Nvidia geforce GT 240 for Windows 8 from the link below video card:

    http://www.nvidia.com/download/index.aspx?lang=en-us&ptid=1&PSID=52&PID=0

    I hope that the information above helps you.

Maybe you are looking for