5.1 Converter is supported by windows 2003 SP2
is it possible to migrate p2v windows 2003 SP2 with sql with the vmware converter 5.1
in the support list that I see only windows 2003 SP2 R2 is done meen two windows OS
Hello
Yes, you can. I highly recommend you use synchronization and configure the SQL service to stop (before synchronizing).
Kind regards
Plamen
Tags: VMware
Similar Questions
-
Is that all models Tecra are supported on Windows 2003?
Hello
Is all models Tecra are supported on Windows 2003?, if I buy a model Tecra with Vista business or XP Professional, is it possible to install os W3K on this laptop?
If so, please let me know the same thing, or is there an official link which will give one of these model dependencies?, thanks
Concerning
Swami
First: toshiba DOES not support any operating system server on their machines. You know the difference between a * LAPTOP * and a * SERVER *?
If you know where is the difference so you can answer yourself why toshiba gives no support in this sense.
The other point (to come to the technical part), is that you can probably install Windows Server 2003 on your computer. And you can search for drivers. But no one here could give you assistance, you´re completely on your on. (And NO, it has NO official connection :/)See you soon
-
VMware Converter error - error Windows 2003 Sp2 to 95%
I am new to the world of the virtual machine and converted several machines without problem, but I have this error Windows 2003 Sp2 and it is very furstrating. I use VMware vCenter Converter Standalone 4.0.1 on the computer itself on a local drive and from another machine on a network share. Looking through the log, I found the following: "taskSpec, task taken 357 an exception in the meantime on the agent task ends." Collecting newspapers to the officer before reproducing the exception more. "Exception message: converter.agent.internal.fault.PlatformError ', but don't see anything else of interest. I could really use some help with this one.
Then, I would try with Converter 3.0.3
can you put the source machine boot.ini file?
___________________________________
VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary
-
Customization of comments does not not on Windows 2003 SP2 64-bit
Hello
I have a server ESX 3.5 with Center Virtual Server 2.5 aned Labmanager 3.0.1.
I am running 32-bit as 64-bit VM Templates.
I created packages of Sysprep for 64-bit machines, and each of them works perfectly except for the Windows 2003 SP2 64-bit model. Where the comments customization fails. I tried everything I can think of.
Trashed the model and built a new, recreated the Sysprep package, updated the SP. But I still get the same error.
Here is the log file:
"2010-01-29 00:34:58 execution of command =" C:\Program Files (x 86) \VMware\VMware "-cmd machine.id.get.
2010-01-29 00:34:58 the command succeeded, output from the command: numnics = 1 & macaddr_0 = 00:50:56:3 has: 01:22 & bootproto_0 = static & ip_0 = 10.88.50.185 & netmask_0 = 255.255.252.0 & gateway_0 = 10.88.48.1 & dns1_0 = 10.88.48.101 & dns2_0 = 10.88.10.55 & suffix_0 = alpha.kaplaninc.com & primaryNic = 0 & computerName = Config1430VM0 & UseSysPrep = Yes & mask bits = 1 & markerid = 109719069 & reconfigToken = 233550085
2010-01-29 00:34:58 ProductKey = F73XK-QH23X-4FR8C-M98DP-VKQ4Y
2010-01-29 00:34:58 number of NETWORK cards = 1
2010-01-29 00:34:58 m_primarynicindex = 0
2010-01-29 00:34:58 current computer name = WINDOWS2003SP16, new name of the computer = Config1430VM0
2010-01-29 00:34:58 computer name set to Config1430VM0
2010-01-29 00:34:59 suffix = current primary DNS, new primary DNS suffix = alpha.kaplaninc.com
2010-01-29 00:34:59 main setting suffix DNS for alpha.kaplaninc.com
2010-01-29 00:34:59 checking if marker file C:\WINDOWS\autoconfig-109719069 exists
2010-01-29 00:34:59 marker file does not exist
2010-01-29 00:34:59 running command = "C:\Program Files (x 86) \VMware\VMware"-cmd 'info-get guestinfo.vsla.customizationscript '.
29/01/2010-00:34:59 failed to execute the command, command output value: not found exitcode:1
2010-01-29 00:34:59 running command = xcopy "sysprep\Win2k3_64'"C:\sysprep"/ S/E/Y
2010-01-29 00:34:59 the command succeeded, output from the command: sysprep\Win2k3_64\deploy.chm
sysprep\Win2k3_64\factory.exe
sysprep\Win2k3_64\readme.txt
sysprep\Win2k3_64\ref.chm
sysprep\Win2k3_64\setupcl.exe
sysprep\Win2k3_64\setupmgr.exe
sysprep\Win2k3_64\sysprep.exe
sysprep\Win2k3_64\sysprep.inf
sysprep\Win2k3_64\wfinf_guide.doc
9 file (s) copied
2010-01-29 00:34:59 command = cmd /c copy "Customize - guest.exe" "C:\sysprep\i386\$OEM$" / y
2010-01-29 00:34:59 command execution failed, result of the order: the system cannot find the path specified.
0 file (s) copied.
ExitCode:1
2010-01-29 00:34:59 cannot copy utility for customizing the comments to C:\sysprep
2010-01-29 00:34:59 error customize the guest operating system"
Here, any help would be greatly appreciated I have a quality assurance team to test the 2003 64 bits and at the present time, they are unable to do so because they do not receive an IP address from the scope of the Labmanager.
Thank you
Nadine
You are missing something:
C:\sysprep\i386\$OEM$
This file should be present in the directory SYSPREP on the Lab Manager, if not, then something is missing. I believe that Lab Manager that creates during Setup, but you can do ths following
First of all, we need to make a folder path that looks like this
sysprep\Win2k3_64\i386\$ OEM$
In the oem folder, make a txt file named:
Cmdlines.txt
Open the file and just put this in it:
\[Commands]
'TAG_RUN_CUSTOMIZATION_EXE '.
This should replicate to have the correct file:
C:\Program VMware Lab Manager\Tools\CustomizeGuest\Windows\Sysprep\Win2k3_64\i386\$OEM$\cmdlines.txt
(Note that your way this may differ on the Lab Manager server)
Once this is done, you will need to rebuild the sysprep packages before deploying again.
Note, you will need to each sysprep folder path too.
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
CVI RTE 2013 (without service pack) is supported on Windows XP SP2?
Please note the links below and the description of the operating systems supported for the CVI RTE 2013 and CVI RTE 2013 SP1. CVI RTE 2013 description is "XP 32-bit" and the description for the CVI RTE 2013 SP1 is "XP (SP3)". Does this mean that the ICB RTE 2013 (without service pack) is supported on all 32-bit versions of XP including XP (without service pack), XP SP1 and XP SP2? Thank you.
http://www.NI.com/download/labwindowscvi-run-time-engine-2013/4105/en/
LabWindows/CVI Run - Time Engine 2013 - R2 Windows 8/7/Vista/XP 32-bit/Server 2008 R2 64-bit/Server 2003 32-bit
http://www.NI.com/download/labwindowscvi-run-time-engine-2013-SP1/4561/en/
LabWindows/CVI Run - Time Engine 2013 SP1 - 8/7/Vista/XP (SP3) to Windows 32-bit/Server 2008 R2 64-bit/Server 2003 R2 32 bit
Hello, Dan
According to the Readme, LabWindows/CVI 2010 SP1 supports Windows XP SP2 (32 bit). Thanks for that bring to our attention.
Best regards,
-
Expand the C drive in Windows 2003 Sp2
Hello
I need to expand a VM windows Server 2003 R2 C: drive using VMware vcenter convertor, fight, it doesn't did me not the possibility of increasing the C: drive. What is the alternative? or I've missed using the V2V? Thank you.
kamran7446 wrote:
Thanks for your reply. Yes, it's showing as unallocated, but because it's a system (C:\) drive I can't extend it by using Diskpart utility I can do for other readers.
There are different ways to do this for Win 2003 (easy in 2008, has expanded in the GUI). For Windows 2003 you could close the virtual machine, get the VMDK on another Windows Server, use Diskpart or another tool to extend partition here - since it is not the system partition / boot. Then mount it in the original virtual machine.
Official VMware training, they recommend a free tool from Dell, called extpart.exe. Simple tool command-line which allows to extend the system partition / boot when the virtual machine is running. Check it out and try if you wish.
It is on the FTP of Dells site at ftp.dell.com/app, any logon not required.
-
RRAS allows us to connect to our corporate network. But the server establishes the connection, it can no longer connect to the local network.
It will not ping the local gateway by default.
I updated the driver for the CARD. Reinstalled windows, re - install RRAS, changed the cable, switch, make sure the windows firewall is disabled, made sure that the antivirus program is disabled. But nothing seems to work.
Looks like at as soon as its connection of RRAS establlished something that happens on the local subnet.
I have no idea.
I'll appreciete one can give me a few insiders.
Thank you
SN
Hello snSbe,
Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please ask your question in the Technet Windows Server General category.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
Thank you -
Hello
Anyone know if the Windows 2008 R2 with Windows 2003 forest functional level domain controllers will be always supported after Windows 2003 support ends in July 2015?
Thank you
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
File acpi.sys caused an unexpected error Windows 2003 on the Linux host
Hello
I have VMware server 2 on a linux host that is fortunately supporting a windows 2003 server that was installed after the converting of a physical machine.
I am trying to install a second server Windwos 2003 CD as a new installation, after seting the machine the web UI I start and get:
Installation of Windows
============
File acpi.sys caused an unexpected error (32768) 6186 line in d:\srv03rtm\base\boot\setuo\setup.c
Press a key to contiune
I don't see what to do and a google and search the forums does not help.
Clues?
Hello
Check your installation CD.
Try to make this CD image and run your VM to ISO image installation.
J.
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
Satellite L10-102 drivers windows 2003
My laptop will not connect to my wireless adsl modem even not wpa or wep password is enabled on windows server 2003.
Hello
In my opinion, you should try to establish the connection on how best without passwords or the firewall settings. This device is not supported for Windows 2003 server and it is not possible to find a driver designed by Toshiba.
In my opinion driver designed for Windows XP Home edition should work too but try to identify what WLAN card is registered and check if you can find a real driver of the site s manufacturer.
If you are able to see your network, but it can not be connected, check the WLAN settings.
Good bye
-
Need help in the migration of windows 2003 server Oracle database server 2012
Hello
My environment is oracle database 9i in windows server 2003, we want to move to Windows 2012 since the end of support for windows 2003.
Please give me a plan, what no need to make the first database upgrade or upgrade of windows, what are the things will have to be considered at the level of Oracle database?
Any help would be appreciated.
Thank you
Lherault
Hello
Given the version of your database is 9.2.0.8 and you want to upgrade to 11.2.0.4 and 9i database is running with log mode archive
I have plan.
(1) your database 9i working with the log mode archive Server 2003
(2) you can take backup of Database 9i with RMAN
(3) you can restore the backup to the base in 2008 (by using 11.2.0.4 software)
(4) when the recovery is complete, you can open the database with resetlogs option upgrade.
change the upgrade of open database resetlog.
(5) once the database is open, you can run 'Upgrade PROCESS'
(6) it should complete your upgrade in 2008
If you think, restoration and recovery will take time, so you can install physics Eve with 11.2.0.4 version in 2008 for the Database 9i.
During failover, you can recreate the controlfile and open the database ' change the upgrade of database open resetlog. "
you will need to check the compatibility with the help from under documents
Reference list Oracle database upgrade (Doc ID 730365.1)
Note 551141.1 : Server Upgrade/Downgrade Compatibility matrix data base
-
P2V di UN 2003 SP2... Windows problemi di Norma
Ciao, stavo provando a convertire una windows 2003 SP2 (not R2) per portarla nella mia infrastruttura (full 5.1).
He converter 5.1 mi da UN error in fase di "committed job", allora ho guardato a po' e show di ho noticed che he converter 5.1 e Unico compatibile con e più Win 2003 SP2 vSphere 5.1, mentre non lo, con solo my con the R2.
Come otherwise tentare di uscirne? Ad esempio installando knew una macchina di test (oggi landlord che ho visto essere guasta... murphy it e) e con UN ESXi 5.0 (per esempio) try a converter 5.0 o inferiore q?
Delivery, at least io ho fatto Così gia a few times. A uso ESXi più datato come 'ponte' per come stuffed the VM, e poi sposto sul cluster 5.1.
Come Attività fatta da spot some clienti, ho usato volte Microsoft a couple of UN ESXi virtualizzato nel mio portable, con tanto a po di ram SSD pulito anche più veloce magari di disco e non di ultima generazione ESXi Server
Ciao,.
Luca.
-
Windows 2003 x 64 does not start after conversion
Hi all, I tried everything I can think and not achieved anything so far.
The problem is I'm trying to convert a physical machine Windows 2003 x 64 Std, a virtual machine. The conversion right, when I go to start the virtual machine, it acts as if no disc is present.
I tried to do a repair, but either the driver that shipped with Windows does not work, or all the others I could well via google and research forum do not work either. I downloaded the latest driver from LSI and were now sitting in the "Setup starts windows" for more than 40 minutes.
What should I do to get this working VM? We run VI3.5 U2.
Thanks for any help yoou can provide...
We have VMWare Converter Enterprise 3.0.3
Have you also tried version 4 of the converter?
You use for your source machine? Or from another machine?
André
* If you found this device or any other answer useful please consider awarding points for correct or helpful answers
-
Windows 2003 Clustering on VMWare ESX 3.5
Hi all
I've searched around, and I can only find documents of vi30 on support for Windows 2003 Clustering Services on ESX.
We have a customer with a 3.5 update 4 environment and want to set up a cluster of printing for load balancing reasons. We want to do it using our ESX environment and configure the virtual servers on several nodes.
For the 30 version I read that his support, but you can not use HA or VMotion using Microsoft Clustering services. Now, I also found a few statements that VMotion and HA is supported after 3.5 Update 1, but I can't find any official statement on the matter.
Is there anyone around who can show me any real document on statements of current support for Microsoft 2003 Clustering Services?
Thank you very much!
The Document refers to ESX3.5 U2 or later version. And there is no ESX 3.5 U4.
-
HP EVA4400 + ESX 3.5.0 + discs Windows 2003 Raw Device Mapping
Hi all
I'm testing a configuration to help:
HP EVA 4400
ESX 3.5
Blade HP c-class
Verification of compatibility EVA4400 on-site HP Spock, I found this note in the section Notes General Guest OS (1): "(7) Raw Device Mapping is not supported on Windows 2003 Guest Operating System load."
I would use snapshot EVA (BC) to a Windows 2003 Server (not R2) for backup.
In the VMware HCL, I have not found confirmation of this note.
does anyone know if the note concerned only W2K3 or same W2K3 R2?
"is there anybody out there" who uses this configuration? EVA4400 is: + W2K3 in ESX 3.5 + RDM + instant. Any problem?
Thank you very much
Max
The restriction was lifted (don't know why he never existed - perhaps no trial):
Release notes for HP StorageWorks 4400 Enterprise Virtual Array (XCS 09006000)
Reference number: 5697-7997, second edition: January 2009
* Configuration of VMware for the raw device mapping details
RAW Device Mapping only is not supported with Windows 2003 Machine virtual guest operating system and versions prior to version ESX 3.5.0.
Maybe you are looking for
-
Cannot access documents in iCloud folder
I tried to access the documents in my folder of iCloud without success. It seems that the only docs I can access are those saved in PDF format. Can anyone help?
-
Toshiba 40RL933 - can't program recording of TV programs
I just bought an external hard drive and I plug my 40RL933. The TV is able to see the HD but I can't program recording of TV programs. I updated the software, but no new version is available. The USB Autostart parameter has on. Y at - it no object ot
-
Hey! help please my hp cant 255 g1 wifi driver for windows 7 find!
-
Add new values to an existing 1 d table in a while loop
Hello I have a while loop that collects data from a DAQ Assistant and stores it in a 1 d table. The number of rows is defined by the user. I'm trying to average of data for each iteration of the loop. So far, I'm only able to get the table to smash t
-
My hard drive starts to die, if I want to backup all my data and be ready in case it fails. One of the things on my list of verification is to ensure that I can reinstall Windows 7 if need be. I don't have in my possession a Windows reinstallation di