5.1 ESXi does not see any number of logical unit after restarting both MD3220 and R820

Similar Questions

• DVGW/hd ts-l802a does not see any DVD/CD

  first DVD worked fine, but when I read the second DVD, it's a ticking hard sound.
  end now, he does not see any DVD/CD / audio CD.

  Is there someone who has / have had this same problem or is there someone who can help me with this problem?

  Hello!

  You must give us a little more information such as your laptop model and the OS.

  However, maybe it could be useful for you:
  http://support.Microsoft.com/kb/314060

  You can boot from a CD like Linux boot disk?

  Good bye

• See connection to the server does not see any source

  Hello

  I have a very big problem, my opinion-connection to the server does not see any computer desk-source. I had seen some sources but not all a few hours ago. At this point, I did not see the sources I so did many trys to see this source. Overall I don't have luck, and now I see no source.

  The problems started with a VM Windows Server 2003 EE SP2, I need training to be deployed with a view. I have not seen this virtual machine, either I chosse linked clones or not.

  The journal of the events of this virtual machine show, auto login TP Server service not started right.

  I hope to have some ideas that will help me to solve this problem.

  Greetings

  You can use a server OS in a pool of Terminal Server services.  If you want to set up a desktop computer, you will need to use a desktop supported OS.   You can find operating systems supported in the Administrator's guide, http://www.vmware.com/pdf/view31_manual.pdf.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• El Captain does not see any photo on my iPhone iOS 6 9.1

  I connect the iPhone to my Mac 6. photos opens but I don't see any pictures when I go to import...

  I restart iPhone and Mac, change usb port and bought a new Apple, connecting cable

  What am I supposed to do?

  When connected to your Mac restarts the iPhone - will reconnect things

  LN

• Adobe Photoshop CS2 does NOT see my policy I have installed in Windows/Fonts Daniel and what should I do if I use this font?

  I had to install my entire computer again so as Adobe Photoshop CS2. Some time ago I bought the police Matrix Script lining "BOLD" and now, I put the police where it belongs: C: / / Windows/Fonts unfortunately I do NOT see the police when I open Photoshop. What should I do to use this font?

  The solution is to put all the fonts in the Fonts in Photoshop file which did not when I unzipped first!

• Windows Vista apparently complete installation of SP2 - it does not meet the step 3/3 installation after restarting tasks.

  Download is complete without error. Installation proceeds as usual. Upon restart, steps 1 and 2/3 have been completed. On step 3 of 3, however, the PC does not seem to do 'something'. It was at this stage 'hung up' more than 2 hours. On 2 attempts to restart the PC, he returned to the same stage of the installation and is still 'nothing. ' Only she can complete this third step of the installation process. Not sure what to do next.

  Can anyone help please?

  Hello

  1. What is the full error message?

  2 did you change on your computer?

  3. what anti-virus is installed on your computer?

  I suggest you to follow the steps below and see if it works fine:

  Step 1

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Step 2

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: after troubleshooting activate the anti-virus software

  Step 3

  Download and install Service Pack 2 manually

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3

  Concerning

• Photoshop CC 2015 does not remember that the last used tool after restart

  Hi all

  I think it happened after the last update (2015.1.1). Whenever I have quit Photoshop and run it again later or the next day, it does not preserve the last tool that I used. For example, if I was using the Healing Brush, the next session opens with the Spot Healing Brush tool as default instead of the Healing Brush, and I have to remember to change the tool. It didn't happen until I'm positive if I pressed J he lurched to the Healing Brush, as it was the last, I used.

  During a meeting, it is normally. For example, I use the Healing Brush tool, move the clone to another task stamp, and if I press J, it jumps to the corrector. But if I stop PS is going on what I mentioned before, if I press J selects the Spot Healing Brush tool instead.

  I know it's a very small problem, but it is perhaps worth mentioning.

  Diego

  I think it was supposed to have been fixed, but it turns out that it wasn't.

  See here for more information:

  s-resetting-to-default-tool-e-g-l-selects-Freehand-Lasso-instead-of-last https://feedback.Photoshop.com/photoshop_family/topics/Photoshop-CC-2015-1-1-Tool-Shortcut

• BIOS DOES NOT SEE ANY SATA HARD DRIVES

  I recently (about three weeks) ago added a 250 GB Samsung SSD EVO 840 to my desktop HP Pavilion a6437C PC 2008.

  This SSD has been configured with a clean install of Windows XP.

  The original 500 GB HARD drive (on which I kept the original, fully functional installation of XP on one partition and all my data on another), was retained and was used primarily for the storage of data... even if I left the XP partition instead of use as a backup OS.

  Once I have everything configured, up and running, both drives worked fine in their assigned duties for at least two weeks.

  The PC is on when I left the House earlier today.  I came home and the power of the PC was turned off (I don't know if there was a power failure or other event).  When I turned on the rear PC, I got the dreaded "Disk Boot Failure" message.  Restarted, press F10 to view the BIOS, and I noticed that only two CD/DVD drives have been detected.  Ni the SSD or HARD drive have been detected.  A ran Diagnostics PC - Doctor F9 and got BIOHD-2 (no drive detected)... what I already knew.

  I've been Googling vigorously, and my guess is that, since the TWO discs are not recognized, and the problem that manifests all of a sudden, the problem lies with the SATA controller or motherboard itself.  I think that it's extremely likely that both discs would fail completely and at the same time. Can anyone suggest what I could take so I can verify or disprove this?  Also, it's an old PC so it prob'ly is not worth starting to replace the mobo... is possible to replace just the SATA controller (assuming that it is the culprit)?

  Maybe it's time to bite the bullet and get a new job.  I discovered that I can't use many of the features of my new SSD fancy, because the material a6437c and firmware doesn't support them.

  Any other suggestions would be appreciated as well.  Thanks in advance!

  Laiki, welcome to the forum.

  You did a very nice job of explaining your situation; nothing left out.

  Because the computer is older, I go to this from a different angle.  I recommend that you check the power supply (PSU) to see if it has failed, because the computer turns off for no apparent reason.  If there is no power to the system, you will not get a boot.  The power supply can cause many problems we don't necessarily attach to it.  Here's a guide to help you troubleshoot it.

  If your problem is solved, please click "accept as a Solution.

• WCS does not see any access point, but see the 4400

  I have WCS, A 4400 and 1130ag access points. WCS see 4400s but none of the ap

  Hmmm... Is it APs running in stand-alone mode or lwapp? They must be using lwapp (lightweight) to be controlled by the regulator

• I customized my Firefox mode full screen by clicking on the option full screen. Now I do not get it back to normal even after restart of firefox and even restart my system. How can I get that back in normal view? Thank you!

  could not return to the normal display mode display mode full screen...

  Try to hit F11

• I just installed Windows Defender, but he does not see my Windows XP Security Center. I had to install Microsoft Security Essentials for Windows to see any antivirus. Why?

  I removed Bitdefender because it slowed my computer down a lot. I then installed Windows Defender and updated and scanned the computer (no problem) and said it was "protect my computer". But the Windows Security Center does not see any antivirus, until I installed Microsoft Security Essentials. Why? And are two antivirus programs now runmning together?

  Microsoft Security Essentials need to uninstall Windows Defender when it is installed. If youshould not uninstall via Add/Remove programs. See the following topics:

  Windows Defender and Microsoft Security Essentials

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  I hope this helps.

• RALink RT3290 does not "see" the 5 GHz networks (802.11n)

  I just bought a HP Pavilion 17 Notebook PC (number of product F9M00UAR #ABA) with victory 8.1 x 64 installed and the wireless card does not 'see' any 802.11n networks.  The driver installed is 5.0.37.0 with a date of 25/11/2013.

  I've seen problems with upgrades to 8.1 affecting the adapter, but nothing works not properly out of the box on a new machine from 8.1 to WIN.  Can anyone offer any suggestions on how to force it to see 802.11n?

  Thank you

  Mark

  Hello:

  The WLAN RT3290 card is only a single band (2.4 GHz).  He can not find the 5.0 GHz band.

  Whenever you see a suffix of bgn on a description of the wireless card, it means that it is a map only single band (2.4 GHz).

  Cards N whose suffixes ending with abgn or agn wireless dual band (2.4 GHz/5.0 GHz).

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• Inspiron 6000 can not see any hard drive.

  Inspiron 6000 can not see any hard drive.

  Readers can be seen and accessed by other machines.

  The BIOS seems to be set correctly, not that there is much that can be done for her.

  Seems that the motherboard is the question.

  Other thoughts?

  ST: FX34091

  
  

• Firefox does not open or does not (see/questions/964132)

  was Ok until recently

  Please include more information, such as your operating system (Windows?) and the version, more exactly what is happening when you try to start Firefox. The information provided in a recent Firefox crash report, if any, can also help. See Firefox plant - troubleshoot and prevent assistance fixing crashes under help in setting this crash and post any crash report IDs recently (they start with bp - )

  The title of your question, says "Firefox does not open or does not (see/questions/964132)" I have reviewed this issue and it was launched by another user of Firefox. /questions/964132? page = 2 # 477049 answer has a number of suggestions if Firefox does not start. Which have you tried?

  To see other possible solutions

  • Troubleshoot and diagnose problems in Firefox
  • http://KB.mozillazine.org/Browser_will_not_start_up
  • / issues/958850 Firefox does not open after a reboot

  Note: A "clean and reinstall" was one of the suggestions/issues/964132. This means remove the Firefox application and then files by reinstalling Firefox since a new download, as explained at the stage of "Reinstall Firefox" in troubleshoot and diagnose problems in Firefox. So that allows you to start Firefox, but if the problem comes back after the computer restarts, you should make another "clean reinstall" and then resolve your plugins by disabling all, as suggested by the troubleshoot and diagnose problems of Firefox article.