5.5 install on Intel SSD m.2

Similar Questions

• clean install of win 7 on intel ssd nvme 750

  I am trying to build a new processor and use a motherboard with bios update appropriate for nvme (ASUS Sabertooth) and a version of nvme 750 Intel SSD. I'll do a clean install on win7 system and do not know with certainty how (will install process, download the appropriate drivers) to get the necessary drivers. Just to be clear, I ask the correct question, for it will be a slot PCLe install. There may be other issues that I'm not aware of if I appreciate all entries

  Thanks in advance for your help

  On Sunday, July 12, 2015 18:32:52 + 0000, DANQUECA wrote:

  I am trying to build a new processor

  A word on terminology - an important point. You're not building
  a new processor. It is not possible. What you build is a new
  computer.

  "CPU" means "Central processing unit". In modern furniture
  computers, the CPU is a relatively small chip, one
  integrated circuit. It is on the motherboard inside the computer
  case. It is not the case itself, or the entire computer, which
  includes the case and what it contains.

  I don't know how incorrect practice began the appeal of the whole
  the "processor" of the computer, but here's my guess: when you buy a computer, you
  normally get the deal and what is in it, with a monitor,
  keyboard, mouse and perhaps a printer. All of these devices
  connect to the ports on the case. Because everything connects to the case,
  the case is "Central" to everything, and the term "Central."
  Processing unit"is sometimes badly understood and poorly applied to it.

  Yes, in this case, I understand what you mean even if you used
  the bad word. But depending on the situation, using the word
  wrong in the future, especially if you have questions, may
  confuse those who read your message and you get the wrong information.
  This is why it is important that you understand what is a CPU.

  and use a motherboard (ASUS Sabertooth) with suitable for nvme updated bios and a version of nvme 750 Intel SSD. I'll do a clean install on win7 system and do not know with certainty how (will install process, download the appropriate drivers) to get the necessary drivers.

  You should get the drivers on the web sites of the material
  Reference of the manufacturer - in this case, ASUS.

• Qosmio G30 and intel SSD - Windows 7

  Hi, I'm new to the forum

  I have a Qosmio G30 with Windows 7 32 bit - model G30 140 31F
  I bought an SSD intel 160 GB because of the promissed 250 MB/sg reading speed, because I need for video editing.
  I tried in Win Xp and now Windows 7 and it gets up to 120 MB/Sg

  I guess it s because of the drivers but I instal the drivers of storage can´t intel matrix any version of it. I tried a lot of them and with the compatibility mode too. It gives me an error saying I have not the minimum requirement.

  I have 4 GB of RAM and 2.0 Gzs centrino duo.
  I have install intel ssd toolbox and it does not recognize the intel SSD drive as a drive intel to improve the speed and other things.

  Please help me to get my speed in the car because it has to be and to have the TRIM option enable in order to have the life of my unit any longer.
  I also have the latest firmware in the drive.

  Thank you in advance.

  DANI

  PD: It coul be, perhaps, if our computer is a sata 150 controller in place a 300 sata controller? I don't know if the control is one of them in any case.

  Post edited by: Gazpachete

  Hi Gazpachete,

  I put t know how you managed now installing Windows, but Qosmio G30 is equipped with a SATA150 interface... This means that you will never get the 250 MB/s read speed of the HARD drive. You will get a maximum speed of 150 MB/s theoretically, but in most cases it of also a little slower.

  How did you check the current speed?
  But 120 MB/s is a good speed. You should be satisfied and it s faster than each computer portable HARD drive. ;)

• Portege R500 - compatibility with Intel SSD 320 160 GB

  I installed an Intel 320 160 GB SSD in my Portege R500 (PPR50E).
  However, the BIOS does not detect the new drive. I updated the BIOS to the 1.60WIN version, the most recent that I found, but the drive is still not detected.

  Is there a possible solution? Or I need to take the drive?
  Thanks for any help

  It must be a problem of compatibility so I don't think you can force Portege to recognize this SSD.
  I'm afraid there is nothing you can do about m.

• Intel SSD 530 series with HP ProBook4540s

  Sorry for the translation.

  After installing the 530 120 portable GB Intel SSD and install windows 7 x 64. the system starts properly. but when not choose "shut down" and select "reboot" then the computer does not see hard drive.
  After a stop, windows loaded correctly.
  After the next reboot problem repeats.
  Help

  I informed the Intel the incompatibility problem.
  They updated the version of the software and the firmware for SSDS, which solved the problem with my 4540 s HP's Probook.
  Link to download the firmware updated from the Intel Download Center: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18455

• X 200 + Intel SSD 330 - HARD drive password / ATA defined but no prompt

  Hello

  I have a Lenovo X 200, that I just bought (in used condition), ridden by me with a 330 Intel SSD. I tried to set a password for the HARD drive with a supervisor password and a power on password and supervisor password and turn on the passwords seem to work as expected. All the passwords are identical at the moment. To test if the HARD drive password was really in fact, I removed the power on password. Now there is no prompt to normal startup. I tried to put the HARD drive password once again, but there is still no prompt.

  If it is relevant, I put the HARD drive password after formatting the drive and installing Windows, but as far as I can understand it, there is no reason this matter as long as the computer's BIOS and firmware of the Player shouldn't care/know what data is on the drive. In addition, no significant/important data on the drive at the moment, so don't worry giving advice that could make existing data on the disk unreadable.

  Best regards

  Eric

  OK, I think I just solved this problem by chance: after the electric bike computer (stop and remove the power cord and the battery for 10 seconds) the VT - x to work, the HARD drive password prompt now works as well. I hope this can help someone else with the same issue in the future.

• Windows 8 must be installed on the SSD?

  I have an inspiron 7520 with a 32 GB SSD and 1 TB HD. It came with 8 pre-installed Win. I bought it from newegg, renovated a few months back.

  I got the impression that the big advantage of SSDS is their very low latency. It makes sense to have the operating system and frequently used programs on the SSD and use the HARD drive for storage. However, as far as I know, the SSD is empty (Windows is considered a 29.8GiB disc with 29.7 GB free) and the operating system came pre-installed on the 1 TB drive.

  (1) I'm good to have the OS and main programs installed on the SSD would accelerate the launch of program time? (The laptop works pretty well, but opening programs is quite slow)

  (2) I don't have any media installation; can I use backup tools provided by Dell to make a disk to reinstall Win8 on another drive, or am I limited to just restore the original with Win8 on HARD drive configuration?

  (In a perfect world I would like wiping Win8 for a new installation of 7 and avoiding all this, but I don't have the budget for a new Windows license right now.) Hum Ho.)

  Thank you!

  Maybe that newegg does not install correctly with the proper functioning of SATA or implement caching.

  As mentioned an SSD of 32 GB, 64 GB should serve as a cache drive only. Although you can press the OS on 64 GB one its pretty difficult.

  If its 128 GB or greater, it is fine to install the OS on. As you said that you don't have the money to buy a new OS, probably you don't want to upgrade the SSD earlier.

  Before changing the settings on your computer, make sure that you made the data using Dell backup and restore. Review the following videos and do a restore USB:

  • Recovery media
  • Restore from recovery media
  • Reinstall or restore Windows 8
  • How to use my Dell downloads

  If Windows 8 was installed manually from Newegg you may be unable to make a backup of recovery and need to get it from Dell. Reference Dell have a new form for applications for the operating system support for in warranty systems AMERICANS here even if the form is translated into several languages I automated sending of media is available only in the United States at the present time and you must call the Support Technology Guide for other regions.

  Once you have made or purchased from Dell recovery media, you will need to check your system SATA operation. To do this, you will need to look at the configuration of the BIOS, the power down of your system and return upward and press F2 immediately on the screen of the Dell BIOS. The SATA hard disk operation must be defined for a quick response, Intel and not AHCI or ATA. I suspect it's on AHCI (that you can see the SSD in Windows Explorer).

  To set up a rapid response on the Intel SSD, you will need to change the SATA Intel Rapid Response operation. The change SATA operation will make the system unbootable more however. This is why I have proposed to you the recovery media. Essentially if change you the SATA operation, you need to reinstall the operating system. You can also watch my / a reinstallation of Windows Unofficial Guideclean install of Windows 8, which will give you instructions to perform a manual installation.

  Once the operating system is reinstalled with the correct operation of the SATA, you can see Dell-Intel sensitive technology and Setup smart Configuration of the answer on page 6. This should hide the SSD in Windows Explorer, but it will be used as a disk cache speeds up the overall performance of your system.

• dv9550 and Intel SSD X 25 - M SATA / IDE

  Hello

  I bought my HP Pavilion in 2007 and in March 2010 I bought Windows 7 (64-bit) and Intel SSD X 25 - M 80 GB Gen2. And I noticed the wire that fell off my SSD performance.

  I discovered that my computer doesen't interface use S - ATA but IDE on the SSD drive because of the map associated to the hard drive of my computer (an adapter that are used to mount the S - ATA drives).

  And when my SSD drive use IDE interface, then Intel SSD Toolbox doesen't use TRIM function and then on my SSD performance fell.

  I read that I should change it to AHCI mode in the BIOS, but I don't find it anywhere because I don't have "' access restricted and see all the features I want to see in a normal installation of BIOS.

  Is it possible to "lock" the BIOS and put the drive in AHCI mode in order for my SSD drive work faster?

  Check the Device Manager, expand IDE ATA/ATAPI controllers and see if there is an AHCI controller installed, if there is then AHCI is enabled.

  .

• How to install a bootable SSD blank OSX

  Hi guys,.

  I have a Macbook Pro mid 2012. He has a regular hard drive 500 GB. I just bought a new SSD 250. It's a Samsung, so I have to install windows inside in order to apply the new Firmware... no problem.

  Now...

  (1) how can I install Mac OSX in the new Virgin SSD? the disc will be placed in the logic board to have the best speed.

  (2) can I access all my files later to the old 500 GB hd which will have all my files in the optical Bay? I mean I don't know if a HD that has used to have the os x installed can be as easy as a regular external HD access. I'm not sure I'm clear with this question. I don't want to lost all my previous files.

  Thanks for your help :-)

  I have the same PBM and just the SSD even have improved. I used "Carbon Copy Cloner App" to clone my hard drive of origin-for the new SSD.

  http://Bombich.com/

  I use a 'USB to Sata' adapter to fix my SSD on the MBP, so I could clone the HDD.

  After you install the new SSD and load the operating system. You will need enable the 'trim' for your Samsung SSD support.

  Open "terminal app" and enter this command: "sudo trimforce activate" then select YES, then YES again... reboot when finished.

• How can I determine which Intel SSD is compatible with my MacBook PRo mid-2012?

  I have a MacBook Pro 13 inch Mid 2012 (not retina) and I need to upgrade my hard drive to an SSD. I've seen several like Intel s 540 and 750 series and a Crucial MX SSD. However, I am trying to identify the one which would be compatible and the best alternative for my upgrade. I appreciate the help. Thank you.

  SSD:

  MX200 essential 500 GB SATA 6 GB/s 2.5 "

  Intel SSD 540 s series 480GB 2.5 "SATA 6 Gb/s, 16nm, TLC

  Intel SSD 750 series (400 GB 1/2 height PCle 3.0, 20nm, MLC)

  Your Mac has a SATA interface, so the PCIe model is not compatible, I would choose most of the three.

• Tecra R950 Intel SSD 520 and SSD set password = F4 BSOD after reactivation

  Hello
  follwing problem:
  Tecra R950 with Intel SSD and HDD/SSD series 520 passes together = always F4 BSOD after activation of the standby mode.
  OK with no password set.
  OK with Hibernate.
  Same problem with iastor and msahci driver.

  Any ideas? Think it's a problem with the bios. He goes down the ssd when wakeup, same cannot write a dump of memory (error 0xc0000010), the necessary cold start-up.
  Steve

  Hello

  Replace the SSD drive?
  As far as I know a lot of the Tecra R950 was equipped with a 500 GB HARD drive.

  I could be linked to the SSD drive

• G62 - 219CA: possibility to backup/clone recovery Partition just before installing the new SSD?

  I'm considering buying an SSD of 256 for my older G62 - 219 CA.

  I can sort of back up or clone JUST the recovery partition, so when I install the new SSD I can put back them there and have this convenience for later use?

  I can't close my b/c the entire hard drive SSD will be too small in relation to the original drive.

  Any ideas/suggestions would be greatly appreciated.

  ToddNS

  It is not really possible to save or to clone the recovery partition. Your best option is to create the support of HP recovery using the Recovery Manager or to order HP media to DVD - Windows 7 64B doublespeak (Office 2010) + Supp 1 Recovery Kit.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Black 700 & Intel SSD 1 TB

  Hello

  can I use this double-sided m.2 ssd? SSDSCKKW010X6X1 INTEL SSD 540 s series

  Anyone have experiences? Anyone know an alternative for a 1 TB SSD?

  I now 256Go and her pups.

  Thank you and best regards

  Hi, I have build in the X 400 1 TB. So yes, its possible.

  In any case, the manual is useless because the Interior is different - fortunally easier. It just open, remove the cables to display, modify SSDS, connect the cables in display, close, ready.

  BUT: there is a big thick sticker everywhere in all other rooms. I have not tried to remove the battery. I just (accidentally) removed a small part to realize that this is not a good idea and realize that the layout is different.

  So far, everything works fine. If I have the problem, I'll tell you.

• Installing the Intel driver

  After a fresh install of Win 10 (Microsoft ISO), I tried to install the Intel driver. First of all, everything works and Microsoft installed a driver that seems to work with the installation of Win10. But with regard to the double graph I want install drivers Lenovo. The ATI works without problem, but if I try to install the Intel Lenovo site I got the error that I need to contact the manufacturer for a special driver

  Look in your device manager, see if the Intel HD Video graphics or 4000 Intel are installed. If so, you need not to all other drivers.

  If not yet installed, look for the marked entries red or yellow, right click and select Properties, then the Details tab, then down to hardware ID. Copy the string and paste it into the answer.

  CB

• Cannot set the password for hard drive on the W530 with Intel SSD 520

  Hello

  I have a w530 with an Intel SSD 520 in primary hard drive Bay. Whenever I try to set a password for the primary hard drive, it doesn't stick. If I chose master + user or simply user, I will enter the password, it will take the passwords without producing an error and then just dump back me to the screen of passwords while leaving the disabled hard drive password.

  BIOS is on the latest version for the w530 and SSD, the machine seems fairly normally operate differently.

  Does anyone have ideas how I can activate the password? Thank you!

  Hi, ctenorman

  I did some research and came across this thread of Intel. There are a few people in the thread who were able to set the password on this particular drive. It seems that changing the BIOS "SATA" compatibility mode, set the password, restart, and then change it to "AHCI" worked for some, but not all customers with this player.

  Good luck and let me know how it goes

  Adam