500 PSC GETS STUCK ON WARMING UP WHEN I TRY TO COPY ME SAYS THAT THE SCANNER DOES NOT
My HP 500 CPS still print fine but when I try to scan something it fails. I turn on my computer and printer off a few times and it will scan. I thought it was a driver issue first of all them perhaps the cable. It has been getting worse and now it copies. I disconnect from the computer and try to copy it gets stuck on the warm up and then gives me the same error SCANNER FAILURE TURN OFF THEN ON. The light is on and it loads paper acts as a heat sensor is bad. I have a good rear electronic on the ground. Maybe someone could point me in the right direction. I really like this old printer and I am ready to spend time fixing it.
Thank you
Want to thank those who took the time to read my problem. I FIXED IT. On a forum someone talked about the problem of warming up and I realized that the only thing that needs time to prepare would be the light of the scanner. I disassembled the scanner Assembly cleaned the mirrors and that fixed it! Has been and still is a good SPC. In order to reduce the cost, I filled my cartridges.
I gave myself another problem. I uninstalled the drivers several times trying to solve the problem of the printer. Now I have additional drivers in device for printers 1284,4 Add-in Manager. No matter what I do XP reinstalls them. A few years I had back get a program installed at HP to clean the registry file so that I could do a clean install of my HP PSC 500 windows drivers. Now I can't find it. guess I didn't save TI - DAM! Been looking on the web site of HP have yet found. - PROGRAMME of INSTALLATION of ANY BODY GOT A LINK FOR HP.
THANKS AGAIN
Steven Ruther
PS; They have me as a student. I have 60 years and owned by a company of software from 1980 to 2000.
Tags: HP Printers
Similar Questions
-
Hello. I need help as soon as POSSIBLE, when click on my first adobe, it says "the application is unable to start correctly 0xc000007b" I need major help as soon as POSSIBLE - does anyone know how to solve this?
... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0
-
I got a serial number, but when I try to license it says that the number is not valid
now what should I do?
Hello
Please see: -.
Error "serial number is not valid for this product". Creative Suite
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.htmlError failed to validate the serial number | CS6
http://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.htmlHope this helps!
-
When I click on a shortcut on my desktop I get a message saying that the file does not have a program assoiated with this file
Hello
These are shortcuts to Internet?
1. make sure that Internet Explorer is the default browser to the control panel > Add/Remove Programs > Set Program Access and Defaults, choose Microsoft Windows or custom. Make sure that IE is selected as the default browser.
2. on this page download and run the patch for files of the URL.
Difficulties of Windows XP file association:
http://www.dougknox.com/XP/file_assoc.htmDon
-
I have a problem connecting on ebay when you use firefox, it has been fine for years, but since a few days, I get a message saying that the page does not when I try to log in. I tried to clear my cookies and cache, but it makes no difference. This does not occur in google chrome and I can log on fine there so what's the problem with firefox?
Do you also have this problem if you temporarily switch to private browsing mode?
- Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
- Select: [X] 'always use private browsing mode '.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
See also:
-
Original title: Network card
The laptop is a series of MSI CX600. I can't get a wireless connection. It comes up with a message saying that the adapter is not connected. The wireless adapter is not displayed next to the ethernet card but appears in the Device Manager and when you click the properties of network adapters listed that they all work normally
Hello
1A adapter ever worked?
2 have you installed the disk supplied with the laptop?
You can check that the installation of the drivers from here:
http://www.msi.com/product/NB/CX600.HTML#/?DIV=driver&OS=Win7%2032
-
Have used the L7680 a few years connected to the hub. Try to implement wireless (as so-called equipped), but not get guests in configure to allow, and when I run config, indicates offline. Tried to connect to the PC and run the installation program again, but nothing has changed. Advice?
Hi rw826,
The L7680 printer does not support wireless connectivity.
Connectivity options:
1 USB 2.0 full speed, front and rear ports
2 Ethernet
3 Bluetooth: using the Bluetooth wireless printer adapter as an option (series L7500 L7600 and L7700 only)
-
When trying to start computer laptop error msg says that intelligent control of hard drive detects impending hard drive 1 (301) ntn even for help. HELP HELP PLEASE
Hello
Thanks for posting in the HP Support forum.
This message is an indication of a hardware problem - your hard drive (HDD) has been corrupted
This isn't a problem of Windows or software. Defective HARD drive needs to be replaced.
If your computer is still under warranty, you must consult and inform the HP support team. Contact them, let them know and check replacement options
> > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
> > http://www8.hp.com/us/en/contact-hp/contact.html
If your computer is NOT under warrantly, you will need to buy new drive HARD on your own OR buy new SSD.
SSDS is highly recommended > > http://ocz.com/consumer/ssd-guide/ssd-vs-hdd
Good vendors include Samsung, Intel, OCZ, etc...
If you don't know how to replace it, you can check with friends online or make the computer to HP authorized service center, where the faulty part can be replaced (not that if the machine is not under warrantly, it may cost you a small fee).
-
as above, turn on windows media player, insert a music cd to rip and does not recognize that the cd has been inserted, are asked to insert the cd when there is already one in.
Hello
1. is the issue limited to any particular CD?
2. What is the file format of the music files on the CD?
3. are you able to burn other files using the CD/DVD drive?
4. is the CD/DVD drive detected in Windows Explorer?
5. What is the brand and model of your DVD player and the computer?
6. have you done any software or changes to the material on the computer before this problem?
You can see the steps in the link.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060
See also:
The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista
http://support.Microsoft.com/kb/929461
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
See also:
http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions
Hope this information is useful.
-
FF crashes when open, always try to send accident report.
FF also pushes notifications as the 'App FF has closed because of a communication error with the server, etc.' this happens even when the 3 g and Wifi are enabled and functional. Occurs every five minutes or more.
Makes about 24 hours I uninstalled, re-installed and then synchronized to the top with my other computers. Haven't seen the error message or a farm of strength since. Will let you know if anything happens, but it seems to be resolved now. Thank you all for your time and your help with this!
-
Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one. I see my movie library where it is stored on an external hard drive, but my music was on my iMac.
Where all the playlists gone and why didn't appear my entire music library? I checked the preferences and iTunes points to the correct folder, BUT only my music purchased appears...
Same thing happened to me. I tried to replace iTunesLibrary.itl with an older copy, but that has not worked. Then I tried to return a version by resetting the Time Machine's iTunes app, but it would allow me to edit or delete iTunes because it is part of Mac OS X.
So, I can not sync my iPad or iPhone, update all apps or find my music, that is, the course of the odf, still on my hard drive. ITunes just can't see the library.
The difficulty of this Apple.
-
Outlook Express 6
Hello
Recently, if I send a big PDF file via outlook, after attempting to send the files, I get an error message saying that the mail has not been sent. The files remain in the Outbox, but when I check with the recipient, they confirm that they have received the mail! This has only recently begun to happen. Any suggestions? Thank youCheck: File | Work offline and in: reviews | Layout: uncheck the preview pane. Open the Outbox and delete the message.If that does not create a new box of sent, and sent items.Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE. -
I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect
If you are running Windows XP... There is a slight chance
that by running the following command would be the fix:Reach... Start / run... and type or copy / paste the following text:
regsvr32 %windir%\system32\qdv.dll
Then... Press on... Come in...
You should see a dialog box stating:
DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful
Good luck...
There is debate on this subject in the following forum:
Windows Movie Makers Forums
An unknown error has occurred -
"I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.
Hi ebugsasi,To remove protect him writing on a kingston Micro SD cards, locate a switch or button on the side of the micro SD adapter card. It will normally be a symbol of locking/unlocking on it. Put it to the unlocked position.This should remove the write-protection feature.Keep me updated on the status of the issue. -
Why I get a 100 error code when I try to log in to start the download of the elements of the picture?
Maybe you are looking for
-
Why do I get an email every time that I use my browser to access iCloud Info?
whenever I use a browser to access iCloud, I get an email to tell me that this has happened since MY long held MacBookAir why is it happening?
-
My Mac system preferences won't allow me to update my iCloud password
I cannot change my password to iCloud my Mac system preferences. There is no preferences available in iCloud system. I recently had to change my Apple ID due to a possible hack. I changed my Apple ID on all my other devices and updated my ID to iCl
-
SATA 6 Gb/s or 3 Gb/s?
I'm confused. I ordered a Samsung 850 EVO SSD, but I don't know if my motherboard supports SATA 6 Gb/s or 3 Gb/s. It says in the manual to my computer support SATA II 3 Gb/s. Then I downloaded a program that lists the specifications of my computer an
-
Cannot delete messages in my deleted items folder
I use windows mail in Vista and I can't permanently delete messages in my deleted items folder. I clicked and right click on the empty the deleted items folder and nothing happens. I can click on them individually and delete this way, but it's very
-
Recovery drive stalls on blue screen
I have a desktop HPE-180 t. The C drive in it gradually impossible where it won't start now. I have a 3 disc set recovery. I tried to restore from that - but it's just a blue screen with a white top, as if you were under water and looking upward to t