5530 envy all-in-one: No. Manual in box

Similar Questions

• 5530 envy all-in-one: does not print want 5530

  When you print test pages everything works well, but when I try to print an e-mail or any other page all I get is blank pages.  No bad images or steaks anything else than paper ablank

  Absolutely, you can. The range of USB printer cables are the same, so even if you have an old kicking around, this would be a great way to test if the problem is from the network.

  One other thought, you have another computer or peripheral such as an iPad or iPhone, you can try printing over the network? This would help determine if the problem is limited to only your laptop. (Printing on a wireless network with Apple AirPrint FAQs)

• 5530 envy all-in-one: printer communicates is not on wifi

  I have recently upgraded to windows 10 and initially my pc and the printer worked well together. I had to turn off printer and turn on again once the two do not want to communicate. In Control Panel, the printer shows as a folder. I tried to remove it in order to reinstall but it just says: after two days ' status: deleting printer '.

  I tried to stop the coil, removing the drivers, software uninstall and in safe mode. Just will not delete!

  If I use printing doctor it detects my wireless printer and says that all software is up to date. When I click on the next button, it says it cannot communicate as there are some missing drivers. I tried to reinstall the diving base and it makes no difference. If I connect by usb, it works perfectly!

  I checked with my router and it is connected to my network. Like wise if I connect via the IP address of printers it works and prints ok. EPrint works as well. If I try and print from a document, it will not and shows it as offline.

  

  Next, I get the following error...

  

  If I run printing doctor he finds the printer and then says to click fix printing. He wants to print the test page. I do that and nothing happens. I click on no printing, and it checks the updates and brings me back to test printing. Select this option and nothing happens again. Internal test page prints ok. Tried to uninstall the software, reboot, and reinstall.

  I'm sure I may have missed something obvious, but it is now driving me crazy... Help!

  Thanks for the suggestions. I tried everything and nothing happened. This morning I had to reinstall Windows 10 due to a completely separate issue and guess what? When I started everything was properly and the printer now works again. Bizzare!

• ENVY 5530 e-all-in-One Series: My ENVY 5530 e-all-in-one prints only two pages of a multi-page document.

  My newly installed (Jan 2015) ENVY 5530 e-all-in-one prints only two pages of a document with several pages of my HP desk top 500-123ea, windows 8.1. Message on PC "Unable to print document", it's even on Double or single sided printing.  A ran Scan doctor, OK; reloaded software and Firmware from the Hp site. He spent hours and hours of reading the elements of list of support HP; Impossible to talk online with HP. very in angry and frustrated. This HP product seems not as "fit for purpose". I will give HP Feedback after this announcement and rate accordingly. I beleve others have similar experience of this problem. HP is aware?  Is anyone out there that can help?

  We gladly invite you.

  A Roll-up update is already available since December, although it seems that the description is not being updated accordingly.

  Follow the section "get the hotfix rollup for Windows 8.1"in my previous link, which can be obtained by installing the package or by using Windows Update, this is the update that the articale refers... ".

  Shlomi

• HP ENVY 5530 e-all-in-one: printer is not to connect to the Internet wireless

  Hello

  English is my second laungage. hope you understand...

  I can print with printer through windows and Mac PC cable. but, I can not connect between rutour and the wireless printer.

  I used the Setup Wizard and found the SSID name. I typed PW. but "Not connected" is displayed.

  I print the Configuration Page from HP network.

  Live wireless

  Status on

  What else can be done using wireless printer.

  Kind regards

  MI-Ko

  Hello

  If you try to connect your printer to the router, you should make sure that wireless Direct is trurned to offshore. Direct wireless is a feature that allows you to connect a device directly to your printer without router (the printer generates its own wifi)

  Please turn off direct wireless (it's often a button on the front panel) and try to connect again.

  I have included a link below for you rprinter support page that contains the user guides that should help also.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882

• HP Envy all-in-one: how to show the password

  I'll put up my receipt just HP Envy all in one, and, while I have my Outlook dot com username and password configured properly, I am repeatedly asked for my password, even within the same session, whenever I go to a different application.

  This wouldn't be quite so bad, if I could at least see what I type, but I have to type blind every time.

  Since I work alone and my office is locked when I'm not here, this seems like overkill.

  Surely there is a soultion?

  I am a fairly experienced computer user, but this is the first time that I have set up a computer from scratch.

  I just Windows 7 Professional.

  Any help much appreciated.

  CJ.

  This can help.

  http://www.askvg.com/how-to-disable-show-password-button-in-Windows-8-Windows-8-1-and-Internet-Explorer-Web-browser/

  REO

• Where is the USB port on the printer 4500 hp envy all-in-one

  Where is the USB port on the printer 4500 hp envy all-in-one

  So the question for your answer:

  Compatible products for: HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)

  Color Multifunction and all-in-one HP Officejet Pro 8500 all-in - One Printer series - A909 HP Officejet Pro L7500 all-in - One Printer series Mobile inkjet printers HP Officejet H470 Mobile Printer series Specialty Inkjet Photo HP Photosmart A520 printer range Printer HP Photosmart A620 Printer HP Photosmart A630 Series of HP Photosmart A820 Home Photo Center Printer HP Photosmart B8550

  And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...

  For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response

  All the best...

• HP Envy, printer all-in-one: printer, HP Envy all-in-one will not print after reinstalling instant ink program

  I have two printers, exactly the same thing, 5530 want all-in-one. One is in Arizona where I live part-time and we're in Oregon where I live part-time. I stopped instant Oregon printer ink when I went to AZ last November. I use instant ink program to AZ while there but she stopped this week when I went to Oregon. I tried to restart instantly ink, got an email that it was successful, but can not get all documents to print from laptop to the printer. Yesterday that it said unable to connect to the server and I chatted for two hours with HP on how to solve the problem. It will print the web now compatible congratulations sheet, but if you ask the computer to print, it circles repeatedly and it seems to wake up the printer at all.

  Now:

  1. If the printer is connected to your Mac via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click the icon of your Apple system and print and Scan preferences.
  4. Hold down the CTRL key and click the icon of your printer on the left.
  5. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the more in the lower left corner.
  2. Select your printer from the list.
  3. In the box titled use select your printer in the list.
  4. If you have an option to choose a name or location for the printer, enter a name such as Oregon. This should help you and your Mac to make the difference between your two printers later.
  5. Click on Add.

  Please let me know the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• envy23 all-in-one 1075: bad image qulaity with cable TV, display of envy all-in-one

  This computer does not have a HDMI input.  Is that what I can do to improve the quality of television?

  Hello @Heavy,

  I understand that you're looking to improve the quality of your listening on your HP ENVY, 23-1075 all-in-One TV desktop PC. I don't see how you can improve quality without upgrading your graphics as any output you do with your computer via USB and will not as good as what your computer displays currently.

  If you decide to update your graphics card I'm you provide a link to the HP Support document: HP ENVY all-in-One Desktop PC product specifications 23-1075, where you will see the specifications that you must follow for your graphics card for replacement under the heading "Intel Graphics Media Accelerator HD (DX10.1).

  I am also including the HP Support document: addition or replacement of a graphic card HP ENVY 23-1000 All in On MXM series desktop PC, that will guide you in the process of replacing.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• HP Envy 5530 e-all-in-one: envy 5530 E cannot detect alignment page

  I'll put up a new e-all-in-one printer HP Envy 5530. I went through the installation OK, until I got to the part about the alignment of the print cartridges.  It prints the alignment page, it will copy even, so I know the scanner works. I printed several pages and they all look great.  But when I use the ink cartridge alignment tool it does not detect the alignment page in the scanner.

  Yes, it is face down on the scanner

  Yes, the cartridges are installed OK

  Yes, printing seems good

  Yes, the scanner can scan and print pages, even the alignment page

  What else to try?

  Thank you

  Well, too bad. I unplugged, moved the card to a regular wall outlet instead of a power strip, and it is turned on, ask to do a print alignment.

  I did, it printed the page, I put the page on the scanner and it completed the alignment.

  I don't know what the problem was earlier, but it worked this time.

• ENVY 5530 e-all in one

  I try to work around the use of the color on all my documents and put in place for shades of gray, but cannot find an option in the preferences for this.  It is available on this model and how to access it?

  Hello

  The good news is for the 5530 Envy that uses ink 2 tanks, 1 black and 1 HABs so you can print black ink only when one of the colors was missing. Please try:

  (a) go to set preferences,

  b click on the paper/quality tab

  (c) click on advanced

  (d) under Document options, select option "Black ink only" (drop-down menu of"grayscale Printin',

  e click OK then apply (next screen).

  Kind regards.

• HP Envy 5530: Hp Envy all-in-one no Scan

  I tried to look upward from this problem in the world and have not found a solution.

  My HP Envy all in a habit of scanning on one of my computers. One is connected wireless and the other is connected via USB.

  I run the Print doctor and he always comes up with the same problem. The control of the driver fails. I did as the doctor Print, restarted my computer, followed the steps on the HP site troubleshoot, still nothing.

  I tried to scan from the computer, tried the scan on the printer option, nothing.

  The fine print option, it's just the scan I have problems with that.

  HP printer. called is shot. Must be replaced. Ugh. He was only three months old and it broke. No fault of HP, but still frustrating.

• HP Envy all in one PC: Recovery Manager, the system restore is disabled by a virus

  Had a virus on my all in one PC envy after a free update to windows 10. Computer has been closing down could not get antivirus to work fast enough. After reboot system had disappeared. There is now no operating system. HP Envy Recovery manager, System Recovery is not highlighted, do not not the possibility to do a restore? Virus stronger than I've ever met. Thank you in advance.

  NIP

  Hello;
  
  Let me welcome you on the HP forums!
  
  It would NOT in fact the virus which prevents HP Recovery Manager to work.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windows-10-Upgrade/td-p/5170752

  What you would really need to do, is to erase the entire disk and restore your PC using something known as HP recovery media.

  HP recovery media is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs. You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update". If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  If you have difficulties to find a phone number, then try: 1 (800) 474-6836
  
  If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• HP Envy all-in-one curve: HP Envy curve in a single 34 "stops just have no idea what is wrong

  So yesterday, not for a long time I was doing / play music on my Hp Envy curve all in one Pc and my mom came and sat next to me and then she let out, but at the point where she was in the kitchen, it just stops randomly with our any type of warning, I don't think that she walk on the power cord I have no course at all, but it is possible so I went to unplug then plug it in to the top cause it does not turn on when I press the power button when I plug to the top she flashed black but the Orange button was not always the same color blue as it suppose to be so I did a bunch of time trying to turn it on , but does not it didn't work so I tried another way before he could flash I turn on the light turns blue can also here that the fan and fill the stream of him but he turns off power then black light flash if I want to sleep in the morning time problem still purists the case so I search something on google and saw that dust could stop working during overall of Suite causes more heard about it, but that is not possible I have a fan at the top but not always it cool so I took part found only a dust not big thing to stop it or fire finger nail, I just finished to put it back together I hope that me and my mother would think that he would return but it didn't at all I made sure that everything is plug properly within the the computer or damage, but I rarely someone let close because I don't want to be too bad there, but only a cord at the back of the power supply cord I can't go wrong plugin which up to I guess. I'm sorry for this long paragraph of madness, but I guess that try to givanyone all the information you need to help me with this problem so I can get back to what I do. THX YOUNGNOOKBEATS

  Thank you for the update. That you are having problems with it, switch on/off, in step 3 of this document, you can select the section that best describes what is happening. If there is something to the step you can not do, then you move to the next thing listed in this process, you can do.

  If you are getting nothing, can not enter the BIOS to do some tests of material, and there is no sign of any change, then at the end of the document it tells you to contact HP support by using this link, http://www.hp.com/contacthp, fill in the form, create a folder for your question, and then use the information to communicate with H phone support.

• Erk - 321 has keyboard: HP Envy wireless keyboard only works after a reboot, but not at initial startup. Envy all in one office.

  Hello, for some reason, my keyboard is not working whenever I'm doing a restart. Or turn on for the first time after a stop down. The only keys that work are the volume keys.
  
  But if I restart by connection or desktop screen, the keyboard works fine.
  
  The batteries are not dead, I replaced the.
  
  Any info would be great. Thank you.

  I have HP Envy Beats all-in-one.  Mouse worked, keyboard no longer works unless after withdrawal of the driver for keyboard then rebooted.  Would work for this next boot, solved by disabling fast-start-up in power options, the theory is computer starts jumped linking or simply crossed it faster that the keyboard can answer.  Hope this helps you.