5580 HP is by default to print CD every time - when I want to print a page

Similar Questions

• with these changes, I can only print a page of print preview ability has been removed I use it all the time when you want to print something on a Web site

  When I was on a website and I tried to print a page, it allows to be a tab that says "FIREFOX" in the upper left corner of my screen, I could click on that tab and I had several options, one was "print" and "print preview". All the time, I use the Preview button before printing to see how the page would look like when I was feeling and how many pages there are. I could then choose to print all or part of an article and adjust it to what I wanted to print. I don't have this tab in the upper right corner. A tab for "open menu" is now in the upper right corner, however, in this menu is only a button 'print '. There is no option for "print preview" and so I can't address that I want to print. I could also adjust margins, etc. of a tab from the view, I can not find too. I really hope there are always options and how I find, where are they located?

  Print this button in Firefox 29 opens in print preview mode first.

• PSC 1350 all prints a test page every time when turned on

  After changing the cartridge, we printed test page.

  Now, whenever we turn on the printer it prints test page automatically.

  How to disable this option?

  Thank you

  Hello vancat,

  If your problem is that your PSC 1350 prints a test page when it is turned on or after every printjob, it is very likely because the cartridge alignment process is not finished. After you have installed a new cartridge in the printer, it will print an alignment page. You must take this page and place it on the scanner glass (make sure that the top of the page is in a good way), then you press the "Scan" button on the printer itself. It will scan the page (that is, read the page) and full alignment process (so it is not scanning in the sense that it sends an image to the computer).

  I hope that clarifies the process of alignment slightly.

• How can I keep Firefox to open an additional page (default page) every time? I want only to open my home page.

  Two tabs always open. default page 1 with my home page and the other with the FF. It is so irritating that I rarely use the Firefox browser even if its faster than IE.

  Finally, I deleted all traces of Firefox on my computer, including all the stuff that uninstall has not been deleted. Then I reinstalled from scratch. That seems to work and I get now only a single tab when I open the program.

  Comment from a forum moderator (~ J99)

  Note it is generally a last resort solution.
  I suggest to all those who wish to follow this solution guarantees that they back up the Firefox profile first. See also:

  • Backup and restore Firefox profiles information
    • Recovering important data over an old profile

• New printer every time when I attach my printer on my laptop or a PC with xp

  Whenever I plug in my printer on my laptop, xp creates a new printer: when I plug it into different USb port whenever I get a new printer on my printer spooler, I mean exemplary appers 1 printer printer

  Hi DavidMERRIT,

  ·         What is the brand and model of the printer?

  ·         Faced with any issue when printing to the printer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

• Lost all the icons of printers in the rear panel Installation Acrobat Reader X 10. Every time when I tried to add a printer (to re - install): Pc autostopped print spooler.

  Uninstalled Acrobat Reader, problem still there.

  The system restore.  Still no help.

  Is gone at the beginning-Online Admin Tools-online Service =>-online Start print spooler.

  But as soon as you click on "Add a printer", auto pc stopped print spooler again.

  (Think that a 'Printer setup' command has been blocked in the pc...) ?

  Please read one of the web pages I've linked to step B.

  Did you go to the HP support as suggested?  I sounds like you need to re - download the software.  Again, read "Article 1."
  What makes you think that "Active X" has nothing to do with your problems? Or are you confused 'Active X' with Adobe Reader X (for example, Adobe Reader 10)?
  What do mean 'Java Active x?  Java and Active X are two completely different technologies, Sun and Microsoft.  There is a 'Java - Active X Bridge,' but most of the users would not be involved with that.  Where did you get "Java Active X?
  The only thing that you definitely don't want to (and cannot, in any case) is upgraded to Vista.

• HP Officejet Pro 8600 911: scanning - have to choose by default software to scan every time that I scan to computer.

  Whenever I scan to my computer, when the analysis is first begins and when it's done, I have to choose among the following options: HP Scan; Picture It 7.0; Photo shop; Photo shop at the beginning or analysis complete. I only use HP scan and delete the other "suggestions". Any suggestions here?

  BINGO! That was the ticket. It was under properties for analysis, and then click event tab.

  You can then choose which program to use for the analysis.

  Thank you! Has been a pain for a long time. I was hoping that Windows 10 would fix it.

• How can I get rid of the vertical column on the left that appears every time?  I want to just print something without having to close this window and select "playback mode".

  All solutions?

  Hi bigpops530,

  You are using Acrobat Reader DC and referring to the tool palette on the right side of the window (or the Navigation pane on the left)? The hotkeys to show/hide these are SHIFT + F4 and F4, respectively. And even if the Navigation pane will remain hidden for one doc to another, the tool pane can be hidden permanently at this time.

  Best,

  Sara

• How can I change default Firexox printer to my system default printer?

  When the print dialog... back to Firefox, it shows that it will print to PaperPort. My default system printer is a Lexmark network printer. I checked my computer devices and printers, and the Lexmark is checked by default. Firefox is the only application that prints in PaperPort by default and that since a recent update for Firefox 29.0.1. I would like the Lexmark to the printer by default in Firefox, as it is for all my other apps. It's annoying to have to manually select the correct printer each time I want to print.

  Hello davecahn, try to Reset Firefox printer setting, close firefox, restart it and check again. If doesn't work then, reset all printer of Firefox settings and check again.

  Thank you

• Can not get the printer to answer (Dell P703w) printer is turned on, is recognized by the computer as the default printer, but when I try to print a page - nothing happens

  Printer is turned on, is recognized by the computer as the default printer, but when I try to print a page, I get nothing. Have you tried "Troubleshooting" and it says I have 3 items in the quieh that prevent printing?

  Hi, Mike,.

  A moderator has moved this thread to the hardware and drivers Forum.  Note the drop-down menus by clicking on the links below.  Thank you.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware

  Save the documents you want to print

  Open the Printers folder

  Right-click on the printer icon and select open

  Click file > cancel all Documents

  Close the print queue

  Start > type services.msc

  Scroll down to print spooler

  Click with the right button on spooler and select stop

  Wait for Windows to stop the Service

  Close Services window

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the IEEE... compatible printer

  Right-click on the driver and select uninstall

  Click on the + sign next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  Close the Device Manager

  Computer reboot and Windows will reload the drivers

  Back to Services.msc

  Right-click on print spooler and select start

  Wait for Windows to start the Service

  Services nearby

  Try printing again

  Go to the manufacturer's website and search for driver updates

• How to change default C4680 printing options

  Desktop computer HP, 64-bit processor.   Windows 7

  I had many odd order issues with my printer cartridges is not admitted, after reinstalling

  all the software printer (which does not solve the problem), I finally found a cartridge that "seems" to have

  eliminated the problem (for awhile).

  But now: 'properties' values return continually to: paper type = "Paper advanced HP", quality of printing = 'the best '.

  and the color to "High quality" options  ... Also disables "show preview before printing"...

  If this reset whenever I print a page, I receive minutes of the impression that I don't want.

  If I change them all, print or cancel the print request, then go back - I find that all have been reset to higher values (very slow) ultra print.

  How can I change these default settings - permanently?

  Hello diffnameand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems with your print settings.  I would like to suggestconsulting this document on changing the settings to print in Windows 7

  Good luck and please let me know the results of these measures. Thanks for posting on the HP Forums!

• I removed the Windows 7 default fax "printer". How can I reinstall it?

  I removed the default printer for Windows 7 Fax from my device list.  How can I reinstall it so I can fax directly from a Word document.

  There is no win by default fax printer, any such driver is provided by your all in one printer or your fax modem enabled

• Using the reader's default PDF printer?

  Our systems have installed Adobe Reader XI. Is it possible to have Adobe PDF as the printer by default/option printer, or which is available for Acrobat Pro?

  Hi uwaku,

  I'm sorry, but the Adobe PDF printer is only available with the Acrobat version, not with the free Adobe Reader software.

  Kind regards

  Nicos

• HP8600 how to change the default to print/fax in color black and white - on a Mac OS 10.9

  I use MS 7 and have the same problem.  Older printers enabled you to change the color and the paper size on the fly.   I love b & w most of the time, but sometimes want to color.  Now, I can not find how to switch between.  Cannot HP fix the software to include simple things like the paper of the color/size changes (and also the envelope D * on the 8600 is absolutely ridiculous) as a loyal user of HP in the past, I won't buy another HP unless it changes!  These developers do not use the printer on a daily basis or consult a person who?

  Hi Lindamh,

  Thank you for your answer! I am pleased that the solution worked for you. Please consider tagging 2 Message like "Accept as Solution" so that others who are unable to change the black and white color can see how they can too.

  Best regards!

• How to set the page size by default for printing on a 8450.

  A few days ago, I printed a few envelopes and now when I print from some programs, the size of the printed page remained the envelope size.  I want to print from any program on paper letter without changing the settings each time.

  Thank you

  This document can help you to define the printing parameters for all type of printing. Not only for the photos as the title suggests. You shouldn't have to keep it set every time.

  The printer settings