55WL768G: photo drop-outs when it is connected to the Win 7 PC (HDMI)

Hello!

My Toshiba 55WL768G is connected to a Windows 7 PC via HDMI (4 HDMI on TV) cable.

I experience intermittent dropouts of the image (screen goes black for 1-2 seconds, as if it was looking for entry) then the picture comes back.

It happens randomly - I tried to replace the HDMI cable without success. I also tried different graphics cards in the PC: AMD and Nvidia. Problem persists.

PC sends 1920 x 1080 p at 60 Hz.

How to solve this problem? Thanks in advance.

Kind regards

You've already posted this in another thread:
http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=72457

Cross of posts are not allowed.
Please follow a thread in order to avoid any misunderstanding in the discussion.

Tags: Toshiba

Similar Questions

  • Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

    Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

    If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

    If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

    https://www.iFixit.com/device/iPod_Shuffle

    and parts are available from sources like eBay.

    Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

    Pricing of the Service - The Apple iPod Support

    NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

    The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

  • Satellite Pro C70 - could not get the image when it is connected to the projector

    This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

    Can you help me?

    Message has been modified: name of the laptop has been added to title

    What laptop do you speak?
    .. .and what operating system is preinstalled on this laptop?

    You use the pre-configured Toshiba system?

    Is the resolution of the screen for both devices (display and external monitor) set correctly?

  • I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

    I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

    Hi sonalnj,

    I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

    According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

    iPhone 6 s Tech Specs
    http://www.Apple.com/iPhone-6s/specs/

    Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

    OS X Lion mountain
    http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

    Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

    Update of OS X El Capitan
    https://support.Apple.com/en-us/HT201475

    Nice day!

  • gen64.exe Malware when it is connected to the internet

    My desire to HP dv6-7206tx with Windows 8.1 has a problem when it is connected to the internet. An application named 'gen64.exe' makes the CPU to run at 100%. And Microsoft Security Essentials doesn't pick it up as a malware. I checked on the internet to confirm that it is a malware. Please help me. I have no idea how he broke into my laptop.

    Hello

    There are many programs for cleaning system of malware, adware etc which would suggest Members here.

    I like this one to detect & fixing malware: https://www.malwarebytes.org/mwb-download/

    Update latest version & tick "Scan rootkits" before starting the analysis.

    After the scan, quarantine the detected objects. Restart the system. Yet once, open the Malware Bytes program, go to the history tab in there: remove all quarantined items from there

    Restart the system.

    Open the prompt as administrator, do a SFC SCAN, check if integrity violations are:
    http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

    Concerning

    Visruth

  • the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

    the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

    I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

    added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

    Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

    Visit this link:
    http://support.Microsoft.com/kb/936213

  • Sound does not work when it is connected to the TV with HDMI

    I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

    Hello gematz,

    The sound does not work when it is connected to the TV via HDMI.

    Go to start.

    Type sound.

    Click sound

    On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

    If you do not see the HDMI, right click and select devices see off, then set as default.

    I would like to know how everything goes.

  • computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

    Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

    Hello

    Thank you for the update.

    This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

    You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

    If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

    Note: be sure to enable the security software on the computer after checking the issue.

    Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • Help! Fuze heats up when it is connected to the pc...

    Hello

    I recently bought a 4g version black Sansa fuse and I got a little nasty gets hot problem-it when it is connected to the pc or the USB power adapter.

    I know that some readers mp3 or other devices can become hot during charging, but I really don't think that the above 50 ° c temperature is normal (since its even hotter tham my GPU...). Ive noticed a post on anythingbutipod.com where a guy had a same problem, so I just want to ask a few questions he did: is there the "anyone else having this problem as well? Should I worry about this? »

    BTW. My sister uses the same pc (even the same USB port ) to recharge his Creative Zen Stone and it does not seem to warm up. Oh, and the USB power adapter I have has the following specifications output: 5.0V +/-0, 1V and 150mA to 1000mA

    Thank you in advance... and sorry for my bad English (if its bad )

    It is not normal, please contact technical support for replacement or return it.

  • Receives sound of digital audio to the speakers on HP a6433w when you are connected to the TV

    Hello, I need a hero, please. I connected my Panasonic TC-L42U5 TV my HP a6433w computer (Windows Vista), using a HDMI cable. Well, I use TV as a computer monitor. My goal is to get the TV to the sound output to my computer speakers, which are plugged into the sound card Realtek. All I really have to audo out on tv is digital coaxial out, and which is connected to the digital in on my hp. But I have no sound. What can I do? Thank you!

    Hello Ptero1,

    Default settings will be put to the analog jacks. You may need to check the settings to make sure they are defined for digital use.

    Maybe this article will help you http://goo.gl/9JATB

  • drive external hard when it is connected to the computer says hd not formatted want format you?

    drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

    Hi keo1,

    We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
    See check your hard drive for errors

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

    Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

    Windows 7 Professional 32 bit.

    Hello Graboots,

    Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • No internet access when it is connected to the modem

    HI I have an Ethernet cable modem BEFMCU10 model v3 connected to a Netgear n100 v2 wireless router. The modem works only when it is connected with the wireless router. When I try to connect Ethernet. Modem to PC, it does not connect, there is no internet access. My ISP is Comcast (Xfinity). It's really weird because how is it possible that theres internet via wireless, but when I connect my modem via Ethernet, I have no internet access

    I remember the first time I activated my modem there is xfinity software that did something to my modem but I don't think it has to do with anything he just install something in my laptop. I did a clean install of the software or anything has been removed.

    > Sometimes I download things and I prefer to use the physical connection because its faster.

    You will get the same benefits and an easier time using a wired connection to your router, rather than the modem.

    > My prolem is resolved, I followed your instructions, thank you

    You are welcome. Please mark as replied to close the issue.

    > is - this quite useful to purchase a Docsis 3.0 modem

    You can check this with your cable provider, but probably not.  Unless you have a very high speed (usually of company type) cable plan there would be no advantage.   You also must be sure that any modem you purchase is compatible.

  • The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

    The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

    A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

  • my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

    my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

    Widget Browser disappeared.  Adobe pulled the plug on this subject quite earlier.

    See that this related discussion from earlier today.

    Widgets a go go

    Nancy O.

Maybe you are looking for

  • That means the (B) the acronym for when you enter a new task start Date?

    When you start a new task, the start tag says:Departure (B): What does the acronym for the (B)? Thank you!

  • In 24.4, recent Gmail thunderbird: mode does not (gmail service problem)

    After I updated to Thunderbird 24.4, recent: mode in Gmail account fails with "sending the password failed. Mail server pop.gmail.com replied: username and password not accepted. If I remove "recent:" the user name, it works. No change when it is to

  • Upgrade to 8.1 Windows keeps failing - error 0xC1900101

    I can't upgrade to windows 8.1, that it gives me this error after sign in again: "Could not update for Windows 8.1. Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer. 0xC1900101 - 0

  • Cursor size

    This question was already posted in the past for previous versions of LV, but I have not found anything on the 12.0 version which I use. I want set the format of the values X and Y of the cursor in the legend of cursor to be the same as those defined

  • Bluetooth connection between two 7290

    Hello I want to create a connection between two BlackBerry 7290 with OS 4.1 I found something with BluetoothSerialPort, but if I pair the und devices 2 start the application I get no BluetoothSerialPortInfos with the static method of the BluetoothSer