6 d needs a fast enough SD card for RAW to 4.5 fps

Similar Questions

• Need new and better graphics card for my Satellite L30-10 W

  Hello

  I have ATI radeon x 200 m and I'm looking for good drivers for it.
  I m using windows Vista.
  I have on my drive of the graphics drivers installed but don't worry all is well and that's why my computer is running very slowly.
  Maybe someone has a similar problem like me.

  Hi Luk

  > Maybe someone has a similar problem like me
  Why you write about problems is not a problem it s a fact

  Believe me the new graphics card driver will not change anything!
  I had a Vista installed on the L30 and the laptop was very slow.

  I decided to install and use the XP again
  Vista needs much more portable recources like the previous Microsoft OS s. That's why the L30 runs slower.

  In my view, we should use the Vista on computers that support a graphics card with a 256 MB own or more, faster CPU and min. 2GB of memory.

• Need advice on the graphics card for a6319fh

  Hello

  I have a Pavilion a6319fh with the original 250w power supply. Now, I have a core 2 quad Q9400 installed and want to upgrade the integrated video card so that I can play PC games, such as cod, Cyrix. I was wondering what type/map (I think a 256M card) allows me to do this without the power upgrade.  Any notice are appreicated. Thank you.

  Replacing the power supply is probably more important than the update of video card. This will better allow further improvements - memory, additional disks, etc... If you're a gamer...  I would try to find a 650w Psalm you can find them for ~ 65-100. If it is too stiff - 450w are ~ $25-30.

  Replace the power supply

  Once you have a decent diet, your choice of video cards becomes much easier.

  ReplacingUpgrading expansion cards

  Your motherboard have a PCIe x 16 slots.

  Go to the website of ATI and shop (top left corner)

  You can find all kinds of cards in many areas procedure, up to an ATI 4850 ~ $300 and requires a 500w PS: http://www.bestbuy.com/site/olspage.jsp?skuId=8894048 & type = product & id = 1212192380239

  If you are a fan of nVidia...

  http://www.nvidia.com/object/geforce_family.html

  Have fun

• Need info on updating graphics card for Satellite P25 s507

  Can someone give me a list of a toshiba satellite p25 s-507-compatible graphics cards? for example, is a "nvidia geforce 6800 go" ultra compatible?
  10 x a lot

  I guess you want to know which graphics cards are compatible, because you want to upgrade the graphics card. Am I wrong?
  As you probably know, mobile technology is not the same as the desktop PC simply and it s is not possible to replace or change the graphics card.

  Especially chips are set on the map and it of not possible to improve it. Also the BIOS, chipset utilities and other application would not accept the new graphics card.

• need to install the sound card for windows xp

  has accidentally deleted previous card in trying to increase the memory

  Hi Harold,.

  You can read the following article and check if it helps.

  How to update a sound card driver in Windows Vista and Windows XP

  We can also refer to the computer or the device manufacturer's Web site and try to download the latest drivers for the sound card.

  Also see the following article:

  How to manage devices in Windows XP

• I need to replace the graphics card for Pavilion M9065UK - what is the current value of best option HDMI

  The current card fried itself and the GeForce 8500GT seems unavailable in the United Kingdom now the 8600 and 8800 have an HDMI output.

  Suggestions for a nice upgrade / or where to get hold of a replacement 8500

  Hello:

  I think it would be a decent replacement for your current card...

  http://www.Amazon.co.UK/ASUS-GeForce-graphics-DirectX-technology/DP/product-description/B005PSQ1IC/ref=dp_proddesc_0?ie=UTF8&n=340831031&s=computers

  The info on the web page got Crusader upward with an ATI model.

  Here's a good writing upward on the map from a USA retailer with your comments.

  http://www.Newegg.com/product/product.aspx?item=N82E16814121397

  Paul

• Update video card for Dimension E310

  I need to upgrade the video card for my Dimension E310.  I don't need the upgrade for playing games.  I need only because of an image editing software, program that I would buy requires Open GL 1.5 support.  Is the card to work with the computer or y at - it another card I should use?    I am running XP.  The card I am considering is Visiontek ATI Radeon X 1550 256 MB PCI.  Thank you.  Danny

  
  

• Need help with food & graphics card updates

  I have a HP Pavilion p6320y I bought 8 months ago. Processor Quad Core AMD Phenom II x 4820.   I play WoW and since the last big patch, have suffered with low fps. I have the drivers to date and follow-up all the advice given to me by Blizz and finally understood that my Nvidia GeForce 9100 (integrated graphics) is not good enough anymore.

  I checked my computer and discovered that I have a 300w power supply (12V) power and read on another post here that something stronger than 300w is required to run a decent graphics card.

  Now for my questions:

  How much a power supply can I upgrade to without hurting my computer, but will be enough to run a good card?

  What would be a good graphics card for this computer?

  I was looking at the Nvidia GeForce GTX 460 1 GB GDDR5 PCI Express graphics card and wonder if it will work on my computer.  Most of the cards more enjoyable seems to be PCI Express and I don't know if it will work.

  Any advice will be most useful. I have some experience with the workings of my PC and I wouldn't trouble myself instead of run to the computer store close to you and someone else to pay. Thank you!

  Well, you start from the low level with the integrated graphics card. It won't cost much to have a substantial increase if all you want to do is to run WoW without error messages. Yes, the 300w power supply is a problem and rules out any map that will require its own means (i.e. need its own power cord as a hard drive), but there are several maps of average quality that it can take a single bus power supply (i.e. just the pci-e slot itself). Just taking a glance at newegg.com I see the following:

  GeForce 9400 under $ 50

  Radeon HD 4650, under $ 50

  GeForce 9500GT slightly over $ 50

  One of these, you should get where you want to be and does not require an update of the PS. The location that you have available is a PCI Express x 16 slot to not look cards AGP; they will not work. If you want to install the map you mention that you need to get better food.

• For voice recorder - do I have a fast enough processor?

  I bought a dictaphone sony, he needs minimum system requirements Pentium III 800 CPU more. I have a Pentium Dual Core processor
  T2080 @ 1.73 GHz.  Is my processor fast enough?  How do I know if I'm compatible?

  I bought a dictaphone sony, he needs minimum system requirements Pentium III 800 CPU more. I have a Pentium Dual Core processor
  T2080 @ 1.73 GHz.  Is my processor fast enough?

  Yes. Your CPU is at least 5 times faster than the minimum for a sony dictaphone. And Yes, your voice recorder is compatible with vista.

• ya need to ready boost like thing for the video card memory

  an if there are something like that out there... where?

  I have the alienware i7 - up to 3.5 Ghz with 16 GB of RAM and 80 GB SSD. The laptop is fast enough.  But I still wanted to make it faster. So, I use card memory 32 GB as a readyboost. I found that speed up really. Before using readyboost, it is best to ensure a speed reading / writing of USB or the memory card is high, otherwise you will have not the advantage of readyboost because the bottleneck of folklore.

  In my case, I used the class 10 SDHC memory card for my readyboost. The memory card is still able to take 3D videos and capable of storing video shooting 3D. My conclusion is don't blame the blessing of readyboost, just you have to find the right type of memory/USB with your existing laptop / computer.

  Use readyboost and enjoy the best performance

• I NEED A SOUND CARD FOR MAC PRO 3.1

  I NEED A SOUND CARD FOR MAC PRO 3.1

  For what purpose?

  Entry?

  Output?

  Maybe this will nelp

  http://eShop.MacSales.com/shop/audio/interfaces

• How fast on SD card to Camileo H20?

  That speed is the lowest speed to use with a Camileo H20 to ensure that registration is also smooth and fine as possible?

  Hi recman,.

  I checked the manual Camileo H20 and I could t find details the requirements SD card so I think you can use the SD/SDHC cards to recode movies in Full HD.

  These days are flash cards are very cheap, so I recommend a class 6 SDHC card. If you buy a 4 GB card for example, they should cost less than 10 euro.
  By the way: I have good experiences with flash SanDisk cards.

  I guess that a faster SD card will bring only a performance gain if you copy the video to your computer via the flash card reader, I think.

• Need me a SIM card for iPad mini 2

  IM thinking about buying a mini iPad 2. But not sure if I need a SIM card. Anyone know?

  If it's an iPad only wifi you will not be able to use a SIM at all

  If it's a cell iPad then you will not need to use a sim card

  only cellular iPads has gps

• LabWindows CVI RS-232 is not fast enough

  Hello

  Is it possible to write a C program which takes RS-232 data buffers and prints it on the screen?

  I ask this question because I write a program in LabWindows CVI and the data is not correct. I used SimpleTerm Gold to see what data are supposed to look like, but CVI misses some. I believe it is not fast enough and therefore lack of data.

  A C program (do not use the functions or reminders CVI) would be possible and better?

  Is it possible to make the CVI to work faster? I changed the environmental policy of the previous "do not sleep". There are two ComRdTerm because we're not getting all the other packages.

  Rate 115200 baud, no parity, 8 data bits and 1 stop bit. Most of the data I receive are 313 bytes and the smallest is 17.

  Any help would be MUCH appreciated as I am completely puzzled.
  Thank you

  Code is below.

  OpenComConfig (com, "COM9", 115 200 Baud, 8, 1, 0, 1024, 1024); / /< opens="" serial="" ports="">
  SetComTime (com, 0); / /< sets="" serial="" port="" to="" never="" time="" out="">
  T0 = clock(); / /< calculate="" how="" fast="" comrdterm="" is="">
  bytes_read0 = ComRdTerm (com, & buffer0 [0], 314, 10); / / read com and store it in the buffer
  sprintf (p_check0,"%.4s" & buffer0 [0]);
  T0 = clock() - t0;
  Double time_taken0 = ((double) t0) / CLOCKS_PER_SEC; / / in seconds
  printf("%d\t%f\t%s\n",bytes_read0,time_taken0,&buffer0[0]);
  Memset (buffer0, 0, strlen (buffer0)); / / Clears the buffer

  T1 = clock();
  bytes_read1 = ComRdTerm (com, & buf1 [0], 314, 10);
  sprintf (p_check1,"%.4s" & buffer1 [0]);
  T1 = clock() - t1;
  Double time_taken1 = ((double) t1) / CLOCKS_PER_SEC;
  printf("%d\t%f\t%s\n",bytes_read1,time_taken1,&Buffer1[0]);
  Memset (buf1, 0, strlen (buffer1));

  Thanks for all the help guys. I finally found the solution. The program was running too slow because I kept opening and configure ports (not shown in the code) I simply kept open ports and it works fine.

  I appreciate all the comments and insight. Each of them will definitely help me still to develop with CVI.

  Kind regards
  Keegan.R

• Need help to upgrade graphics card on HP Pavilion A262N

  This office has a 8 x AGP port and supplied with a video card NVIDIA FX 5200 which still works fine but was eager to put performance before AGP cards level reach hard to find.  Bought a card Visiontek Radeon HD2400 PRO AGP from Newegg that my so-called system is supported, but when I put the card in the computer does not start, the yellow CPU led flashes once then turns off as the bus is blocked.  I have upgraded the original 250W for a 400W power like the card said minimum 270W.  I asked HP cat twice to help on this and I do not really anywhere.  I need to know what AGP cards will work on my machine.  My slot AGP said 1.5V, and maybe that's why he will not support the new card?  What I've read I think that AGP 8 X cards are supposed to operate automatically on 1.5V?

  The Visiontek software said to ensure the motherboard chipset drivers are updated, but then I discovered my motherboard is made by ASUS (P4SD - Stingray) to HP and they do not provide the update, HP must.  HP has no update since 2004 so this course who ask for help.  The motherboard has a chpset bridge north(865G) and south (ICH5), which means absolutely nothing to me.

  I returned the Visiontek card but I don't know why it didn't work.

  I am running XP Home Edition with 1.5 G of RAM.

  The new card is DirectX 10, and this is perhaps why it does not work?

  Solved

  Discovered of VisionTek support my motherboard only accepts the 1, 5V AGP on the cards and their card is a 1, 8V so that they are not compatible.  No AGP 8 X cards list their slot voltage so it's hard to find one that is compatible.

  This site shows the differences between the cards.

  http://www.Directron.com/15agpguide.html

  VisionTek support was very helpful.  In contrast, HP and NVIDIA never to you or have not the slightest idea.