6 iPhone does not load and the screen broke

Similar Questions

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• My iPhone does not load unless the cable is placed just to the right and the phone is still completely. Advice?

  Hey everybody. Since a few days, I have had a hard time charging my iPhone. It all started when my phone onto my computer. He suddenly began to vibrate, and the charging symbol flickered on and outside. Since then, I had to mess with the power cord plugged into the phone until it starts to load. Once it starts to load and remains always completely, is perfectly fresh. The problem is that I do a lot of work and outdoor recreation such as hiking, and I need to charge my phone on the road sometimes. But once I'm start moving the phone around, it does not load until I have reposition it. My phone had not been dropped, smashed, splashed with water, or something serious in several days or even several weeks before acting. This could be a software problem? I cleaned the inside of the charge socket and the charge lead works fine with other devices. I also restored the phone to factory settings and then restore a backup. Any advice would be appreciated.

  Clean the hole of the support and review it with a bright light. You must get it squeaky clean and without bending the rather delicate pins. And make sure that the bent pins.

• The window does not load and the points on a single screen.

  Recently, I was playing a game on my computer and all of a sudden it crashed. I thought that it was weird and turned off the coast of my computer and back on and joined the same game and same server and he did it again. I tried a different game and it does the same thing, but after that, I would get points on my screen to load as such http://oi56.tinypic.com/6s57d2.jpg . And after that, it would get stuck on the Windows splash screen, however there was no points on that or any other screen just as charging one with Asus. System Restore and Startup Repair do not fix something or the other.

  Windows would load correctly at the beginning of fashion and from time to time without danger when safe mode restarts. I have updated the drivers once for my card (geforce 8500) and even if it has been updated and the screen flickered, and instead of going back to normal, the screen turned red and other colors. A little later, I restarted my computer again and it worked to load up and I updated the driver again and this time he did nothing like that and seemed fine, I loaded a game again and it froze and crashed after about a minute.

  I decided to try to reformat my computer since I backed up my files that I wanted and needed. However, when it restarted to complete the installation I always the screen with dots and it does boot to windows and will not complete the installation because windows cannot finish it in safe mode. I wonder what could be the main cause of this.

  You do not give the make and model of your computer.

  It looks like a hardware problem, not Windows.  You have to find a store near you and to have the problem diagnosed.  I suspect that it is the failure of hard drive and if you continue to exercise hard disk that may fail completely and you would not be able to recover your valuable data.

  Colin Barnhorst Windows 7 Ulimate x 64 on DIY with 6 GB of ram.

• My HP envy does not stop and the screen is black

  I tried to restart my laptop but it will not turn off and the screen is black. Help, I don't know what to do!

  Hey Raacbell,

  The ENVY Ultrabook series has a built in battery which can not be easily removed without disassembly.

  If you need to replace the battery due to regular wear of the Lithium-Ion battery on the road, you can see how to replace from page 35 here: HP Envy 4 - Maintenance and Service of Guide.

  Thank you!

• I just cleaned the gills vacuum in my desktop iMac computer and removed and cleaned where is ram and now my iMac does not illuminate and the screen is black. My external hard drive turns on and I can hear it running, but that's all. Any ideas. I'm devasta

  I thought I was doing the right thing, but now it is clear that I was not properly clean even if I was very gentle. Why the screen lights up or really light up at all. Completely black and the keyboard does not light either. Someone has an idea? Thank you

  Unfortunately, vacuums are very statically charge and their use within electronic devices is usually not a good idea. It is very possible that the discharges of static electricity has damaged your iMac.

  I hope that you unplugged the iMac before cleaning. Make sure that the iMac is reconnected.

  Hold the Apple store nearest to the assessment of the iMac.

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• Satellite L40 - does not start and the screen is completely blank

  Hey guys,.

  A good friend of mine has a laptop Toshiba Satellite L40, who died recently, and she has not been able to find the warranty documents yet, so I wanted to ask if maybe you could help.

  Basically, what's happened is that one day she was using the computer and not have noticed that it was not plugged in to charge, and before completely lost all power, the computer went into automatic hibernation mode.
  It plugged into the charger, the lights indicated that he was in charge. A few hours later she was trying to turn on, but nothing. the computer itself gives off a sound very low, as if turned on, but the screen is completely blank. She said that it's almost like she couldn't make the thing out of hibernation mode. He continues to give sound and some indicators remain lit until the battery is running out of charge.
  She has Windows XP is installed on the computer.

  Perhaps someone could help as to what is happening here? 1 million thanks!

  ME

  Hello

  Weird, but have you tried to remove the adaptor AC/DC and battery? Wait one hour and then reconnect the adapter AC/DC and battery. Maybe the laptop restarts.

  If this isn't the case, I think that you need assistance from an authorized service provider. It seems to be a hardware problem and the laptop should be checked by a technician from Notepad to determine the cause of this problem.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• BlackBerry smartphone browser does not open and the screen is frozen

  I got my flashlight for about a week and it is very buggy. First of all it sometimes hangs when I try to open the browser. Other programs work perfectly once I hit escape a few times, but the browser does not work again until I upgrade or downgrade the OS. I keep having to go down and upgrade that takes forever to get my browser to work. Also the phone goes into sleep mode, even though I have it set to 20 seconds for backlight turns off.  Third problem I have with the phone is they continue to tell the browser how advanced is that it will not always support the Flash even if Blackberry has partnered with Adobe. I regret buying a torch instead of a droid.

  Start by doing a battery pull - with the machine on, remove the battery and wait 15 to 30 seconds before reinserting.  Then just wait for the device to reboot.  This should solve at least some of the problems you encounter.

  As for Flash, it is supposed to happen, however it is simply not yet available.  I hope that Adobe will have this ready to go shortly.  As for Flash on the Droid, as a heads up, I heard not so positive things here.  Apparently, there are a lot of bugs, and it is far from an ideal configuration.  I hope that Adobe will fix Flash for Android and I hope we'll get a decent work for the BB version before long.

  I hope that info helps!

• my ipod touch 6th generation does not load and the symbol not load does not appear. I tried switching cables.i have also tried pressing home and turn on the button for 20 sec... but nothing does. Help, please

  my ipod does not work I tried everything, but he continues to refuse to work. It's only a few weeks. nothing seems to be damaged. the symbol not charge also refuses to come. I think he's dead, I need help badly

  Connect to iTunes & restoration

  Thin I your device is in Recovery Mode so the only way is restoring iOS

  If iTunes does not identify your device does take to Apple

• version 32.0.2 does not load and the top bar appears fuzzy

  I get a blank page and a blurry bar at the top. Impossible to click on
  on anything after downloading the new version. (32.0.2)

  I use WIN 7, Office

  I did the above. Also decided to try change my default theme and that seems to have worked so far. Thank you for your help.

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Someone help me please find a solution

  My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Help

  A deal with this * day. Only thing that worked was plugging it into the computer, it supported up to the computer. Do you have a reset, and when that went to spend he asked me to do an update "carrier". If you're on verizon? My co worker and I have the two are facing it today

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• whenever I click on a program, that it does not open and the 'open with' screen appears

  whenever I click on a program, that it does not open and the 'open with' screen appears

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.