6 Lightroom Develop module has stopped working.

The module development suddenly stopped working. I use lightroom almost every day. I have imported a new group of photos into the library and went to develop as usual. I see the photo on the screen, as usual, but Ant changes that I do, like exposure, do not change the picture. I try to crop the photo and he disappears, replaced by solid gray. I'm a Nikon D600 raw photos editing. With the help of Windows 10. Yet once, I use it regularly. Don't make any changes to the system. Develop all of a sudden stopped doing anything.

This could be caused by a profile of defective screen, delivered by an update of Windows or installed during the upgrade of Windows 10.

You can set the monitor to sRGB profile, (temporarily) If this solves the problem, it is a confirmation that the profile is bad.

Then, you ideally calibrate your monitor with a standard material, which will create a new and accurate profile.

To set the monitor to sRGB profile:

Press the Windows key + R, type colorcpl, and then press ENTER.

Add the sRGB profile, and then set as default profile. See screenshot (from Windows 7) below.

Tags: Photoshop Lightroom

Similar Questions

  • Laptop HP Pavilion 15-P002NP: Igfxtray module has stopped working

    Hello Hewlett-Packard, there.

    This is a new laptop, the problem come after HP Support Assistant update using the number of items and the cause is probably HP SoftPaq SP68117 Version 1.10Ap2

    After reboot, always get a boring box with the following error:

    "Igfxtray module has stopped working".

    Details of the event 8.1 Windows Viewer 64-bit:

    Nome da size falha com: igfxTray.exe, versão: 6.15.10.3574, carimbo of data/hora: 0x535821b3
    Modulo falha com Nome: combase.dll, versão: 6.3.9600.17031, carimbo of data/hora: 0 x 53087867
    Excecao code: 0xc0000005
    Desvio Falha: 0x0000000000005fc4
    Processo falha com ID: 0 x 894
    Inicio Hora da falha com application: 0x01d071899f305884
    Caminho da size falha com: C:\Windows\system32\igfxTray.exe
    Caminho modulo falha com: C:\Windows\SYSTEM32\combase.dll
    Relatório ID: de378e5a-dd7c-11e4-8280-142d27d7b406

    Thanks in advance for your support to solve as soon as possible

    Conclusion:

    Reason of error related to the use of HP Support Assistant HP SoftPaq SP68117 Version 1.10Ap2 (video "update").

    Difficulty:

    The step of the explanation of the step:

    1 search for "Device Manager."
    2. click on "Graphics cards" to open the drop-down list.
    3. write down the name of the driver you have so that you know what it is that you want to reinstall.
    4. right click on the faulty driver and select uninstall.
    5. allow the wizard to uninstall the driver.
    6. restart the computer.

    Check that it is uninstalled:

    7. follow the actions 1 and 2 once again and check that the driver is called something like Windows generic driver.

    8. to reinstall the driver from the HP website (because wasn't sure Intel Graphics specification):

    9. find the correct material using http://support.hp.com/us-en
    10. Select "Solution and Update Finder" install "HP Support Solutions Framework.
    11 installed Intel Graphics Driver selected by the HP software

    Solved!

    Thanks a lot for your incredible support

  • PC-Doctor module has stopped working, but do not know if I have it on my computer...

    In the last 3-4 days I get a window intermitant arise seems them to be a "Microsoft Windows" its origin in the upper left corner of the window saying: "PC-DOCTOR MODULE has stopped working. A prolem caused the program to stop working correctly.  Windows will close the program and notify or if a solution is available. "Then a box of"close the program ".  I find 'FIND' to search for a program of the PC-DOCTOR MODULE and can not find one on my system. and "googled" it and came up with some info, but I'm not sure if it's a real source of assistance of a scam 'spyware '!   What I treat, something real, or something trying to eat me alive somehow?

    In the last 3-4 days I get a window intermitant arise seems them to be a "Microsoft Windows" its origin in the upper left corner of the window saying: "PC-DOCTOR MODULE has stopped working. A prolem caused the program to stop working correctly.  Windows will close the program and notify or if a solution is available. "Then a box of"close the program ".  I find 'FIND' to search for a program of the PC-DOCTOR MODULE and can not find one on my system. and "googled" it and came up with some info, but I'm not sure if it's a real source of assistance of a scam 'spyware '!   What I treat, something real, or something trying to eat me alive somehow?

    Hey Toccet

    to be on the good side for malware scan

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem if it is malware before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If this does not work in normal mode only the above work in SafeMode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Walter, the time zone traveller

  • Continue to receive the Error Message: "SystemK Module has stopped working".

    Update Google Earth yesterday.  Since then, received message: "SystemK Module has stopped working".  Any ideas on how to get rid of this message?  Thank you, Janet

    I solved the problem myself.  He returned to an update to Google Earth.  Another search engine has been installed (I tried to abort)... that's what has caused this problem.  Once I deleted all the files from search engines and (Yes, yet another program associate (!), the problem solved).

    Thank you.

  • CL Cap Svs Module has stopped working.

    Start up - a window will appear - ' CL Cap Svs Module has stopped working - Windows will close the program and notify if a solution is available. "

    No not solution - Windows Vista Home Premium. Crashing in Flash Player custody - is that you connected and how the module can be repaired. Thank you very much waiting for help. David

    You should not live with this gene.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If the problem persists after scanning, take these startup entries:

    "How to use MSCONFIG in Windows Vista"

    http://www.netsquirrel.com/Msconfig/msconfig_vista.html

    You can also use this free program to do, too:

    "Autoruns for Windows V11.32"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    See you soon.

  • The scientific and Technical Subcommittee module has stopped working

    The scientific and Technical Subcommittee module has stopped working. I can't find a topic for this query.

    Hello

    You'll be maybe lucky...

    http://www.bing.com/search?q=STSC+Inc&form=IE8SRC&src=IE-searchbox

    CSES Inc. is a company that distributes and supports a small programming language (APL == a programming language)

    http://www.stscinc.biz/

  • patch of active update module has stopped working

    Keep is mocrosoft message this patch of active update module has stopped working. Microsoft said it can be fixed by searching online, but the message keeps returning.

    Hi Westsiddavy,

    A. you are able to install updates?

    B. you get an error with the message code?

    C. recent changes made on your computer?

    Try the following steps.

    Step 1: online antivirus scan

    Perform an online virus scan to check if your computer is infected.

    www.Safety.live.com

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

    Step 2: safe mode

    Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 3: reset windows update components

    Try this step if you found the error during the installation of updates. Open the link and click the fix button.

    http://support.Microsoft.com/kb/971058

    Previous post: the result.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • igfxext module has stopped working message is displayed at the start of Windows 7. What is c?

    igfxext module has stopped working message is displayed at the start of Windows 7.  What is this and how can I fix?

    Hi Bob Bala.


    Thanks for asking this question to Microsoft Community!

    As I understand it you receive a startup message all to connect to the computer.

    He would be grateful if you can answer these questions to help you further.

    1. have you made changes on the computer before this problem?
    2. What is the brand and model of your computer?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    You can try to check if the problem occurs in safe mode and check if it helps.

    Method 2:

    If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.
     
  • Error "intellistor backup engine module has stopped working" when I use Samsung Auto Backup.

    Original title:

    I have a 1 TB Samsung external drive.  It is came with Samsung Auto Backup software on this subject, so I loaded which.  Many worked for several months, but now I get an error message Windows 7 "intellistor backup engine module has stopped working".  Nobody knows how to solve this problem of Windows 7?  I remember not to make changes or new software from loading when the error message first showed.  I prefer to use this automatic backup, because it is easy and can be left alone.

    Hello

    The problem is specific to this particular application?

    Try the following methods.

    Method 1:

    Perform a clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: once you are done with the boot, follow step 7 in the article to restore your computer to a normal startup

    Method 2:

    Uninstall then reinstall the app and check.

    Uninstall or change a program

  • "intellistor backup engine module has stopped working" how to solve this problem?

    This module is to enable the back upward on hhd Samsung 1 TB Samsung AutoBackup program

    Not being is not familiar with your program, it's worth to uninstall then reinstall your backup program is not if nothing else works?

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

    Will the system restore back you to a point before the problem?

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
    http://support.Microsoft.com/kb/936212/#appliesTo

    Have you tried to test with another Windows user?

    See if there is something in these similar positions.

    http://www.Google.com.au/search?q=%22intellistor+backup+engine+module+has+stopped+working%22&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = ta19ULmSNYWjiAf-voCYAg

  • SBU update module has stopped working windows 7

    About 2 weeks ago... the pop-up windows is telling me

    Update of the SBU Module has stop working...
    What can I do to solve this problem... it is embarrassing when writing email, or go to research... using windows 7 64bid
    Cheers for any help...

    Sorry, could you clarify it please.

    SpeedBit is now uninstalled? (or you reinstall it?)

    And the error report is yet to come, but only when you run Chrome?

    I don't use Chrome much, so maybe it's not the case, but if you look at chrome Extensions or Plugins of chrome, have you a listed extension or plugin for SpeedBit (TBH I don't know yet if there is one--just a guess). If so, disable it.

    or something in that sense - http://www.speedbit.com/dap-help/google-chrome-dap-download/ , in which case try remove (assuming you still have it).

  • 5.7 LR "Adobe Photoshop Lightroom 64-bit has stopped working" in the library when I type "import...". »

    5.7 LR "Adobe Photoshop Lightroom 64-bit has stopped working" in the library when I type "import...". »

    I have 31K photos in a catalog.  It's the only catalogue that I use.  Recently, today I imported 84 photos on the same folder I try now to import 200 +.  Adobe Epic Fail!

    Delete the folder "Lightroom 5 catalog Previews.lrdata" and the folder "5 Lightroom Catalog Previews.lrdata Smart" and disconnected from my USB hub, but not my two external hard drives USB.

    I import now.

    Thank you Adobe for the best photographic catalogue in the world system!

    -Love

    Steve

    http://stephenjungphotography.SmugMug.com

    Live from the "capital of the world Live music."

  • "Adobe Photoshop Lightroom 64-bit has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

    In the last two weeks, I installed Lightroom (current version: 5.7.1) on a new All-In-One(Model No. 27-p014) HP Envy 2734 with Windows 10.

    It worked fine until today, when all of a sudden, when I tried to import a recent work, I got the above message. After several tests (and failures), I thought using the system restore and reset the unit to the settings of this morning, thinking the problem might be related to an update from HP that I had downloaded all that little before import (improved performance .NET Application - CPS).

    No luck.

    Hello
    Welcome to the Microsoft community. Sorry for the delay in responding. The problem is specific to the Adobe Photoshop Light room? Do the other application run without any problem? What version of Windows operating system is installed?

    Please, take a look at this thread and check if that helps.

    Adobe Photoshop Lightroom has stopped working

    Hope this helps and let us know if you need help. We will be happy to help you.

  • Of Adobe CC Lightroom Develop module has been disabled.

    Hello

    I signed up for a year Adobe CC August 30, 2015. All monthly payments have been made, including 30 December 2015. I haven't used my CC for a few months because she's been very busy with work during the holiday season. I tried to open it tonight and the Lightroom Develop module is disabled until I have purchase a new membership. Certainly, it may not be correct? I would be very grateful for any advice on how to solve this problem. Thank you. I use a PC

    Hi SueIOM,

    Could you please try the steps mentioned in the below article that might help:

    Lightroom does not launch or closes automatically after the splash screen

    Concerning

    Sarika

  • Lightroom Develop Module does not work?

    My OS is version 10.11.5, I use Lightroom 5.  My module work has continued to develop.  When I move the sliders, nothing happens.  I restarted my computer, reloaded the Lightroom software and development module still does not work.

    This problem just happened.  I tried to edit several photos and results are the same, nothing happens when I move the sliders.

    What should I do next?

    Try resetting the Lightroom preferences once: How to reset preferences in Lightroom?-the Lightroom Queen

Maybe you are looking for

  • Upload Photos on Windows PC in the ICloud account

    I have a windows PC and I did an ICloud account but can not download photos of childrens account in IPhoto.

  • iCloud on my iphone

    I can't access my icloud account. It says it is locked and I need to access answering Q safety or sending an email to reset. Well, my parents did everything for me which was a HUGE mistake. Q safety are wrong and the reset email will be sent to the s

  • Framework actor with GOOP 4.8 4.1 problems

    Hi, Im in 2014 Labview f2 + GDS 4.8 + actor framework 4.1. When I create a simple project with two actors (the EndevoGOOP400 class provider) and a launcher vi he gets on a loop of the actor a parent calling nested and nested actor actor calling the p

  • My printer supports AirPrint?

    This air of printer will print?

  • What damage would result of the use of inkjet paper in a laser printer

    The subject says everything really. If you accidentally use glossy inkjet photo color laserjet, it would harm the printer? If this would be how it would hurt it? This replacement parts would be needed. Conversely if the paper shining laser for exampl