6 of VMWare Workstation - not able to connect to my network "physical."

Hello

I installed VMWare Workstation 6 on my Windows Vista Sp1 - machine (host).

With VMWare, I have virtualized a Win 2008 Server. The configuration of the ethernet connection is on "the bridge."

I a physical NETWORK adapter on the host, which is connects to an Access Point Wireless LevelOne (with built-in switch).

I am not able to ping to the physical NETWORK card to Win 2008 virtual server. Get an idea what I did wrong?

Best regards

Oskar

  • The firewall between the two? Turn them off temporarily.

  • The customer is using DHCP? If so, did he receive an address?

  • Post ' ipconfig/all' of the host AND guest, and the.vmx the file of the client.

If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

AWo

VCP/vExpert 2009

Tags: VMware

Similar Questions

  • Satellite L650-11R - not able to connect to public networks

    Hello.

    Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.

    I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.

    Any suggestions?

    It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.

    Try to compare the LAN settings with others who use the same operating system.

  • 5.5 ESXi host is not able to connect to the network

    I installed ESXi5.5 U2. But the ESXi host grab an IP address from the DHCP server. I tried givind static IP of my office network, but still unable to connect to the network. I checked the CLI, the vmnico of the adapter is in place. Why the machine does not have an IP address?

    I started this machine from the network (available in the bios settings) and observed if an IP address is required. Then, I started the server from the hard drive. Surprisingly, it took an IP and I could connect via the network.

    After that, I plugged this NETWORK adapter to a different location on the same server. I found the same problem (do not take IP). But when once again, I did the "Network Boot" thing, it took an IP address and now it works fine.

    What is average?

    Apparently, my problem is solved, but I still don't know the reason.

  • I am not able to connect on one of my computers, my network error message saying: unknown username or bad password.

    Journal of the network questions

    I am not able to connect to my network to one of my computers.  I enter the username and password (same as to log the computer - correct?), and yet I get the newspaper no failure message saying unknown user name or bad password.  What can I do?

    go to the Properties window (right click computer and select properties) is the only registered owner your name on the first pc and your first and last on the second?

  • I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

    Hi, I'm a newbie to Vcenter.  I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

    Hello Cy1989,

    Check the items below in your vCenter server.

    1. check that VMware VirtualCenter Server service is started otherwise starts pls start...

    2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...

    3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.

    4 Vefiry database are running and all required database services are running...

  • Not able to connect to the host ESX 3.5 by VC so customer VI

    The host ESX 3.5 has been disconnected from the VC, and we are not able to connect customer using VI as well. The virtual machines on the host are running without any problem.

    Got the message when tried to restart/start services of Mgmt. below

    # Service mgmt-vmware restart

    stopping VMware ESX Server management services:

    VMware ESX Server Host Agent Watchdog

    VMware ESX Server host agent

    Starting VMware ESX Server management services:

    Agent Host VMware ESX Server (background)

    Availability report startup (background)/etc/init.d/mgmt-vmware: fork: Resource temporarily unavailable.)

    # Start of Service mgmt-vmware

    From the VMware ESX Server management services:

    VMware ESX servre Agent Host (background)

    Availability report startup (background)

    status of service mgmt-vmware #.

    VMware-pass is stopped

    hostd.log - entries

    /etc/init.d/sshd command failed

    Didn't the /etc/init.d/sshd fork: Resource temporarily unavailable.

    Let us know the fix for this problem other than restarting the host.

    To know how to clean it, please read KB1007887 - defunct cimservera of process on VMware ESX 3.5 hardware management agents run and follow the instructions.

    André

  • HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

    Hello

    I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

    When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

    My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

    Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

    the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

    In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

    I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

    My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

    Thanks in advance for your help,

    Lorenzo

    Hi Lorenzo,.

    To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

    You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

    Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

    http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

    If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

    http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

    Kind regards

    Shlomi

  • I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    only title bar opens and nothing else... Please help

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Also check the cookie exceptions.

  • 2000-2314TU HP: not able to connect to the LAN and Wireless network

    Hello

    I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

    You are the very welcome.

  • Not able to connect to the server with modem 56 k

    I try to connect my Tecra via modem 56 k Internet.
    Also, I tried with another computer laptop with the same details and that worked.
    But when I try it on my Tecra I get an error that is not able to connect to the server.

    So I think that it is a parameter that is not defined correctly for the modem.
    (If you compare it to another laptop all parameters are the same as windows).

    Thanks in advance,

    Theo

    Hello Theo

    Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

    After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

  • my ipod nano is not able to connect to itunes.

    my ipod nano is not able to connect to itunes.

    What version of Nano? What kind of computer? What operating system on the computer? What happens when you try to connect?

  • I am not able to connect to the main wifi network but can connect to the network of comments.

    Hello

    This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

    The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

    Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

    Wait a minute

    Turn on the modem first and leave a few minutes, he managed by itself

    Turn on the next device that is connected to a modem and leaves turn a good minute

    Keep turn on devices one by one at a time, one minute apart, until the entire network is back

    Recheck the network and report on your results

  • not able to connect to the game of google on mobile data store

    I bought gold x 2 lenovo 32 GB vibe.

    in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

    Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

    and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

    Please give the solution.


  • Not able to connect to Wifi, USB ports, bluetooth

    Hello team

    I bought the new HP laptop today. I have installed Windows 7 OS. I am not able to connect to Wifi, not be able to use the blue tooth, not be connected to the USB. I downloaded the drivers from the website of the other computer. But how can I install it with one of them works. Please help us on the question mentioned.

    Product number: G8D85PA #ACJ

    Thank you

    Sunil

    Hi Sunil_motukuri,

    Thank you for visiting the Forums HP's Support and Welcome.I would be happy to help you. I read your thread on your computer laptop 15-g030au HP and who need wireless for Windows 7 drivers. Here is a link to the drivers.

    Hope this helps you.

    Thank you.

  • I am not able to connect a remote desktop from my laptop computer.

    Remote Desktop connection problm

    I am not able to connect to a remote desktop from my laptop with Windows XP Professional service Pack 2, but at the sametime I can access the remote computer from other laptops. I tried manythings but it doesnot work.can someone help me? Thank you

    Hello

    Is there an error code or the message that displayed when you try to establish the remote desktop connection?
    Try it out below mentioned methods and check if this may help solve the problem.
    Method 1:
    Check out the link and follow the steps.

    Installation Windows XP Remote Desktop Web connection
    http://support.Microsoft.com/kb/284931
    Method 2:
    You can also visit the link below and try the methods in the article.
    How to use the Windows XP Professional Remote Desktop feature
    http://support.Microsoft.com/kb/315328

Maybe you are looking for