6 open/create/replace the file in NI_Excel.lvclass:Save report error to

Similar Questions

• Error 7 open/create/replace the file to write spreadsheet String.vi

  Hello

  I try to use a CompactRIO with 9225 analog input module for measuring an analog signal.

  Version of LabVIEW is 2013 (32 bit), when I run only e VI, errot 7 has taken place.

  I'm sure that the path is correct, but the error information indicate used different path "------" is not "/", I have attached the picture.

  I don't know why this is happening, appreciate any suggestion to solve this problem.

  Thank you.

  Frank

  The cRIO-9075 doesn't have the ability to mount a Windows network share and the read/write directly with the host computer.  You'd have to do, this is the file from the FTP host (the host has to a customer, and the RT system has a server) or to run an FTP server on the host that the target can interact with (the host would then have a server, and the target's screws of the FTP client) to get the file to the location.

  -Danny

• In the file open/create/replace bug

  I found this problem in LabVIEW 2009. The Boolean indicator doesn't seem to work properly in the first snippet. It returns TRUE even with a valid path. With some trial and error, I found a work around that will work correctly at the moment. I just wire an Out error after the file open/create/replace (excerpt of a second). Is this a bug? I'm doing something wrong?

  I had a lot of code that uses it to test to search for existing files, and then the output of wire to a statement box. I know there's also a check if the folder/file available Exists.vi. I wouldn't spend a lot of time to change all my code if there is a known bug and it will be corrected in the next update. If this isn't a bug to know, where can I submit it?

  

  

  This isn't a bug. You have the race condition between the indicator and close REF.

  Use it in this way:

  

  Andrey.

• Strange behavior file open/create/replace

  Hi all

  I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

  Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

  Thanks for your time,

  Kind regards

  Harry

  Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

  (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

  See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

  Never use the paths as strings. There are very few cases where this would be appropriate.

• Error file open/create/replace FPGA

  Hey guys,.

  I'm having a problem where, when I try to use reading worksheet VI in my RT Host Application, it returns error code 7 (can't find a file or folder does not exist) when it calls the function of file open/create/replace. The feature works very well when used in a standalone VI that is not part of the FPGA project and I made sure that my path is correct, but for some reason, it does not work in my FPGA application. I have placed sensors and ensured that the correct path to the file is linked to the input function but the error persists. The refnum output file returns 0, not "not A Refnum". Does anyone have an idea on why I get this error or if I'm the only one? Any help would be appreciated. Thank you.

  
  

• Give permission to the domain users to replace the file in the folder created by domain admin

  We have a domain controller in our network. also we have the domain users and domain administrator. We create a batch file that copies a file to the folder by using a script to the server policy when users open a session input/output. However if the admin area access system cant use overwrite file in the folder. We want to give permission to the domain users to replace the file in the folder created by the domain administrator.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  Hope the information is useful.

• Microsoft Outlook Express cannot open attachments in the file, that they were created

  When I try to open an attachment in my email address, the program goes directly to Microsoft Word instead of going to this type of program, the attachment was created for example Adobe.  It started just do this in the last 2 weeks. What should I do to get the Outlook Express to open attachments in the file of type, they are created

  You will have to do for various types of files. I use PDF files for an example.

  Create a file association.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Adobe Reader.
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  This should allow you to open these attachments directly from email address now.

• Replace the file in Thinapp

  Hi all

  I have an application that uses a microsoft access database. I thinapp had this application and it works perfectly. However, on our physical machines, we replace the file with a new copy database whenever the user connects, because we don't want this database to grow. In the thinapp application, it is saved in % ProgramFilesDir %.

  Is there a way to do this in Thinapp? I'd hate to set up an image of parent separated for this application.

  Thank you

  Mike

  You can try to set REMOVESANDBOXONEXIT = 1 in the package.ini. The sandbox will be deleted when the user closes the application and once again created (with the database file) fresh at each time at the launch of the application. You may lose any customizations that are saved on the sandbox.

• "There was an error opening this document, the file is damaged and could not be repaired." by e-mail

  I get "there was an error opening this document, the file is damaged and cannot be repaired." Sometimes it works, but more often than not I get this message when you try to open a PDF well my IMAP email server. I also have the latest player adobe downloaded on my computer and I have run Norton 360, which is to day saying my computer is free from any malicious dishes. Help, please!

  Hello ErikAtkinson,

  You can try saving the PDF file on your desktop before trying to open it.
  See if that helps with corruption problems.

  If this isn't the case, then I suggest that you post in the forums Adobe for Adobe Reader. I have included a link below:
  http://forums.Adobe.com/community/adobe_reader_forums

  They better be able to help with their product.

  Sincerely,

• matter of record: How do I control which folder is open when I search the file I want to download or the file I want to save a file to?

  When I use internet, how can I control what file is opened when I search the file I want to download or the file I want to save a file to?  He always seems to be the last that has been opened, but I want the default on my desk.

  Perhaps the following links provided courtesy of SpiritX MS MVP will help:

  Set the Internet Explorer default download path.
  http://www.tweaklibrary.com/Software_Applications/Internet-Explorer/27/set-default-download-path-of-Internet-Explorer/10153/

  How to change the Internet Explorer default download directory
  http://www.windowsreference.com/Internet-Explorer/how-to-change-the-default-download-directory-for-Internet-Explorer/

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My recipient Receive the answer that the file I sent is not available or that they cannot open all of the files that I send.

  My recipient Receive the answer that the file I sent is not available or that they cannot open all of the files that I send.  I have not had this problem in the previous version of Adobe send.

  We have seen this happen when the link you send is broken up in the recipient's email.

  Using anonymous or custom links? Anonymous, how you send the link to your recipient?

  If your recipient send the link to you, can you open the file it?

• If I put a restriction of password which only allow customers who purchase print it (no copy or modification of the document) have an impact on the quality of the file when people open and read the file on mobile devices like phones and tablets?

  If I put a restriction of password that only allow users who buy to print it (no copies or the modification of the document allowed)-it will have no effect on the quality of the file when people open and read the file on mobile devices like phones and tablets?

  Some mobile devices won't be able to open it at all, but if it is open, the quality is not affected.  Please note and understand the warning you get when you set security: indeed, it is largely ignored by many apps.

• Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is most of time consu

  Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is the longest part of the process, then I would be able to automate it.  Any ideas?

  This is the worst absolute way to embed fonts for PostScript through deletes dynamic transparency, color management, bookmarks, hyperlinks, etc. Yucck!  You are in many ways to ruin the files, do not clean them.

  Acrobat Preflight has a correction for embedding fonts. Takes only a few seconds per file PDF. And if you have a bunch of these files, you can create an action to do this.

  -Dov

• Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Migration of CS4 breaks the license. That's what 150:30 means. Assuming you are using a Mac.

  You can use the Terminal method to repair the license... but I stress that carefully read you and understand the instructions here before you run it. beginning

  # 11. https://forums.Adobe.com/thread/1714695

  If this isn't what you want to do, you have to reinstall.

  Gene

• When you save the file GIF grace to save for Web how can I save the original?

  Hello.

  When you save the file GIF grace to save for Web how can I save the original?

  I need the original and not optimized.  Help, please

  ilyag58620179 wrote:

  But I need to GiF animation file

  And by definition, a GIF image is optimized! A GIF is not the same size of the PSD file, and you are mistaken in thinking that you want it to be. If you are trying to achieve the slightest loss of quality, regardless of the size of the file, then you need to adjust your settings to save for Web.