6 s iPhone connects to the computer, but it charges

Similar Questions

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• My lg800g phone shows connected to the computer but is not assigned a drive letter

  My lg800g phone shows connected to the computer but is not assigned a drive letter

  Hello

  You can manually assign the letter.

  Check out the link and check if that helps.

  Change, add, or remove a drive letter

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• IPhone detected by the computer, but not iTunes?

  Hi all

  I have problems connecting my Iphone 4s to Itunes.

  I connected through my usb cable, tried every other usb dock, Itunes re-installed and restarted my computer, checked for each update (currently on 12.3.3), erased or reset my Iphone, then all the rest with the removal of some records according to:

  https://support.Apple.com/en-us/HT204095

  I have 10 windows and every time I connect it comes up with the Pc companion thing, but the icon to connect my Iphone on itunes just never came up. I plugged in my computer and my phone is still in charge and is visible elsewhere.

  Help, please!

  Try the steps detailed here. You may need to date/reinstall the driver as described below.

  http://www.technipages.com/iTunes-fix-iPhone-or-iPod-not-detected-in-Windows

• printer connects to the computer, but the two are connected to a wi - fi connection

  Printer connected to wi - fi and laptop works fine, but when I try to install the printer to computer keep getting installation failed

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check the link and see if it helps:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem is not resolved, please provide more information to help you best.

• continues to fall sharply the internet connection for the computer but the xbox is not yet

  If the computer is on and I walk for an hour or two, when I come back, the internet connection went only to the computer.

  Xbox live still works fine.  So, I have to unplug the router, then plug back in and then try again to connect.  Usually it works fine then.

  But he's so old when you do this several times a day. Help!.  Does anyone know what is the problem?  I don't know what else to try.

  Thank you!

  As you mentioned that your XBOX works perfectly well and you face the problem only on your computer, this means that your Linksys also works very well, it has something to do with the computer itself. Also after some time you made the day before computers and when you resume your computer, that in view of the time, you dosent computer to communicate with your router and that is why you are not able to go online from your computer.

  Here are a few parameters that you can try on your computer, I think that might solve the problem...

  Win XP: Click the Start button > go to RUN > type in "ncpa.cpl" - hit OK > right-click on icon "' connection to the Local network'" and select properties-here click on "Set" jaspal-click on a button on the "Advanced" tab-In 'property' box, point, highlight link speed and duplex/network/type or Media type connection - and here (network connections)
  the 'Value' box select 10 MB/s half duplex / 10 half mode base T/10 basic and click OK.

  Vista: Click the Start button > Panel > network and Sharing Center-click view the status of the Local Area Connection - click on continue click on the properties below-click on a button on the button Configure click on the tab 'Advanced' - in the area of 'Property' highlight link speed and duplex/connection network/type or type of media - and in the 'value' box select 10 MB/s half duplex / 10 half mode base T/10 basic and click on OK.

  If it dosent always works, so I think you need to update the drivers for your NIC, once you update, it will not solve the problem.

• HP Officejet Pro 8500 A909a: Help on printer display message says: no connection to the computer

  Help on the printer screen says: no connection to the computer, but is connected via a USB cable. Also prints OK, but the HP solutions Center says: ink levels not currently available; iable.

  Well this thread of @greenturtle should help you with Troubleshooting.

  Please let me know if the Solution Center works after doing the above.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• How long it take restore iphone when connecting to the computer

  How long it take restore iphone when connecting to the computer

  Is based on the amount of data to restore. How long do we have?

  GB

• Just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without certificate

  wireless problem

  just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcome

  Tom

  Hello, Bill Bates,.

  I would say to contact support with their router blank:
  https://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=1&VM_CUSTOMER_TYPE=&cmd=ESCALATION_REQUEST

• my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  Hello

  1. are you able to use with other applications that connect to the Internet?

  2. when exactly you get this error message?

  3. should we come up with any specific Web site?

  4. what version of Internet Explore do you use?

  5. don't you make changes to the computer until the problem occurred?

  6. the problem occurs in safe mode with networking?

  I suggest you follow the methods listed in order of appearance in the following Microsoft KB article:

  How to optimize Internet Explorer:

  http://support.Microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  For your reference: Internet Explorer could not open the Search Page.  http://support.Microsoft.com/kb/219004

  Hope this information is useful.

• My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again?

  Why my internet has stopped working

  My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again? I have another computer in the House and that works very well.

  http://support.Microsoft.com/kb/321448

  http://support.Microsoft.com/kb/311766
  In some cases, you must remove the cookie as well.

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.