64 bit for VS Widget plugin support

Similar Questions

• Windows 7 (64 bit) for Tecra M9 drivers

  When will be possible to download drivers for Windows 7 64 bit?

  As far as I know Win7 will be support begins when the Win7 is officially released. According to various sources, he should be in October/November.
  So, we have to have patience and wait for Toshiba begin Win7 support. I use it on my Satellite Pro P300 and want to have all the drivers too.

• Need drivers Win7 32-bit for Satellite L300

  HY

  I have a Satellite L300 (pslb8h). I bought in Hong Kong when I went there last year and I can not find the drivers for Win7 32-bit for IT... everything I come up with is for L300 plsb8E with a different configuration.

  I have a Pentium dual core t4200, 3 GB ram, 250 GB hard drive.
  Help?

  Toshiba laptop offer around the world and computers notebooks are specific products of these countries. You have laptop designed for the Asian market, but looking for drivers on European support page.

  If you want to find the drivers for your model, you should look for it on the support Toshiba Asia page I think.

  Check if you can find the drivers on http://toshiba-asia.com/sg/support/drivers
  Please post comments.

• Re: Where to find drivers for XP & Vista 64 bit for Qosmio F50 - 10M

  Hello

  I would like to know when toshiba get out the drivers for XP and Vista 64 bit for the Toshiba Qosmio F50 - 10 M series.

  Greetz

  First of all you can find all THE Toshiba Vista 64-bit drivers on the European driver Toshiba page
  Secondly do not all features are available through the Win XP because in many cases, they are only supported by Vista

  So if you want to use your devices to high-tech multimedia machine, then you must stay with Vista.

• What are the options for 3 bit for Hw_Arm_Sel in PCI-6601 field

  Hello

  I'm programming our own driver to operate the PCI-6601. For our application, we need option arms material. I know, it is possible to use 2 counters for this, but NEITHER-TIO also supports hw_arm. Although it is not explained in the registration document at all, after some tedious verification in the DDK examples I found that the pieces are in the Gi register metering mode. I know that the position of the HW_enable as well as the position of the 3 options sellect bits PIN. What I don't know is what are the options of 3 bits for Hw_Arm_Sel field. I contacted the support NEITHER, but received no support. How can NEITHER sell boards and when a customer who doesn't use LAbview or Measurement Studio, or DDK, but implements its own driver is then so arrogant at least of NOR? Also, how can OR publish only a part of the records of the Board of support and when a customer contacts and request for some records do not get supported at all? I can't predict the missing records, and he is professional enough to document comes in part from records of 660 x Instruments. And, upon request, you have nothing.

  I hope that someone from the community are aware of this Hw_Arm_Sel 3 pin option. Otherwise, there is just one option of the error and the trial. Or simply throw away the jury.

  Dr. Kirco Arsov

  Hey, sory for the delay in my response. It works and it works very well with the description of Joe and Joe, thanks for your great help. I greatly appreciate. Now we finally also have this option as we wanted it and it works fine.

• Downgrade from Windows 7 64 for XP 64 bit for the Presario Compaq CQ61 - 319WM VM371UA

  HI - lets get right:

  You have now the Compaq Presario CQ61-319WM in front of you is preloaded with Win7, but you want to downgrade to your copy of XP64bit.

  Your system is:

  AMD Athlon II M300 64-bit multiprocessor Dual Core @ 2 GHz

  RS780/RS880 (M)<- your="" northbridge="">
  ATI Mobility Radeon HD 4200 (3400 variant?)<- your="">
  SB750<- southbridge="">

  1 unit comes with a 250 GB HARD drive. Replace it with another SATA HDD for your copy of xp64 bit before powering it, by registering and activating, seeing that this solution is not yet complete, saving your software Windows 7 preinstalled in this way.

  NOTE: Do not install Windows XP 64 - bit Edition on your current 250GB Win7. If you did get the Compaq CD to restore.

  Download nLite from 2 a. nLiteOS.com to integrate SATA drivers (called: "Slipstream") inside your Windows CD otherwise: BSOD. (recommended method)

  -or-

  2B. After changing BIOS to recognize the floppy USB download drive drivers SATA on diskette and the XP CD, press F6 to manually load these drivers SATA AHCI floppy.

  3. use your Slipstreamed CD and let XP starts normally (no key of F)

  -Si Windows successfully installed continue-

  4. now that XP64 bit runs the first thing that you want to install the .NET Framework 3.0 would be.

  5. install Visual C++ redistributable (free version)

  6 install the network driver. See below

  NOTE: 8102 & 8103 pilots would most likely work, not 8139 family.

  Here is a list of the most easy to install drivers:

  -Agere Systems HDA Modem - SOLVED!

  -Atheros AR9285 WiFi adapter - SOLVED!

  and the most difficult of them...

  -AMD Mobility Radeon HD 4200 shared memory<(unsolved)>

  -IDT High Definition Audio CODEC<(unsolved)>

  -Realtek RTL8139/810 x Fast Ethernet Adapter - SOLVED!

  -AMD AHCI SATA Compatible RAID controller - SOLVED!

  -ATI SM BUS - SOLVED!

  A breakdown of the versions of the driver that is used in our tests:

  ATI SM BUS

  /*
  Description of Driver ATI SMBus
  Date 26/02/2007 driver
  5.10.1000.8 driver version
  Provider of driver ATI Technologies Inc.
  Oem3.inf INF file
  Hardware ID PCI\VEN_1002 & DEV_4385 & SUBSYS_363F103C & REV_3C
  Location Information PCI bus 0, device 20, function 0
  PCI Device ATI SB750 - SMBus Controller
  */

  AMD AHCI COMPATIBLE RAID CONTROLLERS

  /*

  Driver Description AMD AHCI Compatible RAID Controller
  Date of the driver 17/03/2009
  3.1.1540.127 driver version
  Advanced Micro Devices, Inc. driver provider.
  File INF oem0.inf
  Hardware ID PCI\VEN_1002 & DEV_4391 & SUBSYS_363F103C & REV_00
  Location Information PCI bus 0, device 17, function 0
  PCI Device ATI SB750 - SATA AHCI Controller
   
  Device resources
  IRQ 22
  Memory D0408000-D04083FF
  Port 4010-401e
  Port 4030-4037
  4038-403(f) port
  Port 404 B-4048
  Port 404c-404F
  */

  AMD RAID CONSOLE

  /*
  Driver Description AMD RAID Console
  Date of the driver 17/03/2009
  3.1.1540.127 driver version
  Advanced Micro Devices, Inc. driver provider.
  File INF oem0.inf
  Hardware ID SCSI\ProcessorAMD___RAID_Console___1.00
  Place of information Bus number 0, target 10 ID, LUN 0

  */

  ATHEROS AR9285 WIRELESS INTERMEDIATE DRIVER

  /*
  Description of Driver Atheros AR9285 802. 11 b / g WiFi Adapter - wireless driver intermediate
  Date of the driver 16/03/2009
  1.0.0.92 driver version
  Driver WS provider
  Oem8.inf INF file
  Hardware ID wsimdmp

  */

  ATHEROS AR9285 WIRELESS NETWORK ADAPTER

  /*
  Description of Driver Atheros AR9285 802. 11 b / g WiFi adapt
  Date 2009-06-22 driver
  7.7.0.348 driver version
  Driver Atheros vendor
  Oem7.inf INF file
  Hardware ID PCI\VEN_168C & DEV_002B & SUBSYS_303F103C & REV_01
  Location Information PCI bus 2, device 0, function 0
  PCI Device Atheros AR9285 802. 11b / g Wireless Network adapt
   
  Device resources
  IRQ 17
  Memory D0100000-D010FFFF
  */

  REALTEK ETHERNET CARD WIRELESS INTERMEDIATE DRIVER

  /*
  Driver Description Realtek RTL8102E/RTL8103E family PCI-E Fast Ethernet NIC - wireless driver intermediate
  Date of the driver 16/03/2009
  1.0.0.92 driver version
  Driver WS provider
  Oem8.inf INF file
  Hardware ID wsimdmp

  */

  REALTEK ETHERNET CARD DRIVER

  /*
  Driver Description Realtek RTL8102E/RTL8103E family PCI-E Fast Ethernet NIC
  Date 25/09/2008 driver
  5.706.925.2008 driver version
  Driver provider Realtek Semiconductor Corp.
  Oem28.inf INF file
  Hardware ID PCI\VEN_10EC & DEV_8136 & SUBSYS_363F103C & REV_02
  Location Information PCI bus 3, device 0, function 0
  PCI Device Realtek RTL8139/810 x Fast Ethernet Adapter
   
  Device resources
  IRQ 18
  Memory D0000000-D000FFFF
  Memory D0010000-D0010FFF
  Port 2000-20FF

  */

  AGERE SYSTEMS HDA MODEM

  /*

  Driver Description Agere Systems HDA Modem
  Date 21/11/2008 driver
  2.1.92.0 driver version
  Provider of driver Agere
  Oem30.inf INF file
  Hardware ID HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_103C137E & REV_1002
  Rental Information Bus internal High Definition Audio
  */

  On our test unit CQ61 we currently have ALL but TWO missing drivers. the Audio driver and the video!

  After consultation with AMD, IDT and Insyde each has decided that this problem is with Compaq "Softpaqs Engineering Team", in the meantime a viable solution. Support for Compaq of level 2 has been unable to help in this case, however, agreed to intensify this concern to the "level 3" (genius).

  "Diversity is the key to break the monotony" Obviously, still a challenge for the Presario team in this area.

  Our testing shows that the problem exists in the firmware of the cards mothers; Perhaps the BIOS. Insyde (SSII BIOS) indicated that HP/Compaq has the "sp?.» solution "exe" and refused further assistance because of HP/Compaq contracts. "

  So why Compaq insist on locking/force their users in Windows 7, without other Windows based operating system options for this model and others who are currently in production? We're going to investigate.

  Currently, Windows XP 64-bit Edition is still being supported by Microsoft after January 10, 2010. So why not HP?

  Finally.

  Here we have the more stable driver, for most official, complete the value for the model CQ61 running XP64 (and possibly XP as well). It concerns all the drivers listed below:

  Driver SATA AHCI-

  Bus - SM

  -Realtek Ethernet Controller

  -ATI Mobility Radeon HD 4200 video driver

  Driver Modem Agere-

  -Atheros WiFi driver

  Use this forum as the timestamp.

  There were too many sources to the list for the updated driver, so a full driver package was created in place to keep things simple, without all the headaches of doing it yourself.

  This package should work on XP 64-bit operating systems based and is released as is. The instructions are inside each directory.

  NOTE: After downloading Please run the 1st prerequisites folder, then all other folders depending on numbers starting with 1 ( 0 record is for your slipstream). Here are the details of the file:

  Compaq CQ61-319WM Presario VM319WM Driver for XP64bit.7z

  MD5 Checksum = 7AAA90D0C06778630CF1117CEB318974 MD5 download www. MD5summer.org /

  As always with any software Please check against your trust of anti-virus software on a clean system.

  You will need 7zip, which can be downloaded from www. 7-zip.org in order to extract its contents.

  Download here.

  Last NOTE: If MD5 checksums do not match after downloading, remove it immediately. In this community, we are here to assist you in all possible ways to make your life a little easier with the PC. This is an ongoing process and the development of this package has been a joint effort from many sources. However, we remain optimistic for the official drivers of HP if they also, we support the cause as highlighted in their slogans and advertising. All in all societies can only works in their resources when it comes to projects like this however... "Diversity is the key to break the monotony", that's why we all think alike. We will stay hopeful. Thank you for your support. * UART *.

• Can I downgrade Windows 8 64-bit for Windows 7 64-bit?

  Can I downgrade Windows 8 64-bit for Windows 7 64-bit?

  And also my drivers continue to operate?

  I have only one installation of Windows 7 disk and want to make sure that I could use it incase if my computer goes down / gets corrupted / ect. Since I formatted acccidently my OEM drive when I take away a lot of partitions, I did.

  My computer:

  Model: HP 2000 Notebook PC

  Model No.: C2N26UA #ABA

  OS: 8 64-bit Windows

  Additional info: my computer came with Windows 8 64-bit pre-installed.

  Hello:

  First of all, make your game of W8 recovery discs before proceeding.

  All the W7 x 64 drivers of this Associates model should work on yours.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5275377&prodTypeId=321957&prodSeriesId=5259212&swLang=13&TaskID=135&swEnvOID=4063#11360

  The driver is missing (and is for any laptop AMD) and it's the chipset driver that installs the SMBus Controller and the USB 3.0 controller.

  You should download and install this driver first and then restart. First download listed is what you need.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Then install the graphics driver and restart, then install the audio driver and restarted.

• You place your order of media 64 bit for Vista

  I have a copy of Windows Vista 32-bit, but I need now support 64-bit. I can't find anywhere on the Microsoft site where to apply to. The card provided in the area is reference to www.windowsvista.com/1033/ordermedia, but it takes you just for the generic marketing of Windows Vista site. It is still available, and if so someone can give me a link to order the media? Thank you.

  Hello

  Microsoft used to have 64 bit for vista32 bits edition only shipping cost detail

  It was the link

  http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

  It seems that it is discontinued that microsoft is passed to windows 7

• the upgrade to vista 64-bit for windows 7 64 bit.

  I recently bought a pack of conversion from microsoft for windows 7 64 bit.

  It downloaded as files from the BOX and im extremely frustrated, I can't do anything with these files. I assumed it would be a simple download and upgrade to vista 64-bit for windows 7 64 bit and have tried everything available to me.

  Please help someone

  You can download the .iso file correct 64-bit instead:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/Microsoft-Windows-and-Microsoft-Office-downloads.aspx
  The format of the box is the old version.

• Tring to download Prosteel V8i 64 bit for autocad 2008-2009 get error found - no localized installation package cannot complete

  try to download prosteel V8i 64 bit for autocad 2008-2009 meet up with the following message

  FOUND - NO LOCALIZED PACKAGE INSTALLATION CANNOT COMPLETE

  don't understand what this means can help you, people I purhased this software of say

  go and buy something else, that I am telling them that I don't want anything else, so I have a problem

  Hello

   

  1. in the place where you are trying to download?

  2. are you referring to the installation? If so, how do you install the program mentioned, CD/DVD or downloaded copy?

   

   

   

  AutoCAD is a software (CAD) computer-aided design and drafting. The software supports both 2D and 3D formats. The software is developed and sold by Autodesk, Inc..

  Method 1: Run the Fix - it next.

  Note: Fix - it next asks you point the installer.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2: Put the computer in a clean boot, and then try to install.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  To get help, you can ask the question here:

  http://forums.Autodesk.com/T5/installation-licensing/BD-p/24

• the 32-bit version of the plugin does not work after filterSelectorParameters

  Hello!

  I have a working version of the 64-bit plugin tested PS CC 2015. It manages only the filterSelectorStart and the filterSelectorAbout, and it works well. To compile as a 32-bit version, that I modified the caviggia file from

  CodeWin64X86 {'PluginMain'},

  TO

  #ifdef _WIN64

  CodeWin64X86 {'PluginMain'},

  #else

  CodeWin32X86 {'PluginMain'},

  #endif

  Then I compiled 32-bit version of the plugin and have started testing in PS CC (not 20xx, just CC). Before I tried to debug plugin has caused an error in allocating memory, debugging showed me this call stack.

  WHY is it produces, why 64-bit plugin works well and 32 bits can not? I tried to maxSpace value 0 or a low value, but in any case filterSelectorParameters branch has been called, and then there was an exception in the depths of the PS.

  Please help me fix this strange problem. Thanks in advance!

  Thank you very much Tom for assistance!

  During the long search I found a core of the problem: it is my love for the __stdcall calling convention. It looks like PluginMain must be __cdecl, so if you like __stdcall too, set at least CC of PluginMain to __cdecl. No other problems were detected.

• 5.7.1 Lightroom and NIK collection. I installed Nik Collection correctly. I followed the instructions from Adobe for importing the plugin in Lightroom. If I go to "photo" / "past to" (I use the Italian version, so I don't know if the translation of the po

  Lightroom 5-7-1 and NIK Collection. I installed Nik Collection correctly. I followed the instructions from Adobe for importing the plugin in Lightroom. If I go to "photo" / "past to" (I use the Italian version, so I don't know if the translation functions and controls is correct!) happens that all plugins are visible but not active. And even the default plugins are no longer active. I have repeated several times the procedure installation, but without result. Can anyone help? Tiziana

  You may need to do a manual install. See if this link helps:

  https://support.Google.com/nikcollection/answer/3002259?HL=it

• Delivery of stock for the SOAP plugin

  Hello.

  I found a problem with the initialization of the inventory for the SOAP plugin.

  There is a device orchestrator with SOAP plugin installed.

  There is a SOAP host defined in the inventory of the SOAP plugin. To access this host of action script, I use the method "SOAPHostManager.getHosts ()".

  The problem appears after orchestrator service restarts when the SOAPHostManager.getHosts () method returns an empty list (no matter how much time has passed since the reboot was completed).

  After I manually navigate the SOAP plugin with orchestrator client inventory, the problem goes away and 'getHosts()' begins to work properly.

  Is it possible to automatically perform the initialization of the inventory for the SOAP plugin?

  Thank you.

  Just hollow cheked the doc of the plugin and seems that there is a bit of confusion.

  SOAPHostManager.getHosts () - returns only the host names of SOAP

  If you need an object entirely initilized SOAPHost you can do something like...

  var soapHosts = Server.findAllForType ("SOAP:Host")

  System.log (soapHosts.Length);

  for {(hostIdx to soapHosts)

  Host = soapHosts [hostIdx]

  System.log (host.preferredEndpointURL + "-" + soapHosts [hostIdx]);

  }

  Let me know if it helps

• selector of color and the list of fonts in the options for the widget?

  Is it possible to add a color to the options for the widget selector? How about access to the list of fonts of the site?

  The new version of Muse, available today, has support for the color picker and the file picker. Still no list of fonts.

  MuCow Documentation

• Oracle 11.2.0.3 Client 32-bit for Windows

  Hello
  
  I installed a client Oracle 11.2.0.1 on a Windows 2003 32-bit, but I can't do dmp files wth exp because my database is 11.2.0.3.
  

  Export: Release 11.2.0.1.0 - Production on Thu Dec 13 18:00:11 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  
  Connected to: Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production
  Export performed WE8MSWIN1252 and AL16UTF16 NCHAR character set
  
  About to export the entire database...
  . exporting tablespace definitions
  . export of profiles
  . export users definitions
  . export of roles
  . export of the resource costs
  . exporting rollback segment definitions
  . export the database links
  EXP-00106: database invalid link password
  EXP-00000: export completed unsuccessfully

  where can I download Oracle 11.2.0.3 client 32-bit for Windows?
  
  Thanks in advance

  Where can I download Oracle 11.2.0.3 client 32-bit for Windows?

  Goto https://support.oracle.com
  Under the tab updates and patches and Patch search search box * 10404530 *.
  A list of software Oracle 11.2.0.3 is listed according to the operating systems.
  Select the version of the software that corresponds to your system opeationg (in your case, it's 32-bit Windows) and download it.

  See Doc Id Metalink: * where to download 11.2.0.3 or other Grid Infrastructure Patch Set [ID 1410284.1] *.